I've just upgraded to Corel X5 and cannot find a way of selecting more than one layer at a time in the Object Manager docker. (With X3 I simply held down Shift and selected however many layers I wanted). I sometimes need to select dozens of layers at once to delete them or switch off visibility - surely not one at a time? How is this done in X5?
View 14 RepliesI'm going to connect my AI file to After effect. So I had to create lots of layers in order to edit them seperatly in After effects. But it seems like my amount of layers are too large because AE always crashes (not responding -> Force quit)
So I wanna break some stuff down in multiple AI files, but I don't wanna go and select every layer and delete it. That would take too much time. Is there a way to select the multiple objects in Illustrator and delete that but also its layer its in?
Is it possible to select entities of multiple layers?
I've looked at... [URL] .....
...and tried the following code.
string[] layerNames = {"1", "2", "3"};TypedValue[] tdv = new TypedValue[(layerNames.Length * 3) + 2];int i = 0;tdv[i++] = new TypedValue((int)DxfCode.Operator, "<or");foreach (string ln in layerNames){ tdv[i] = new TypedValue((int)DxfCode.Operator, "<and"); tdv[i + 1] = new TypedValue((int)DxfCode.LayerName, ln); tdv[i + 2] = new TypedValue((int)DxfCode.Operator, "and>"); i += 3;}tdv[i - 2] = new TypedValue((int)DxfCode.Operator, "or>");SelectionFilter sf = new SelectionFilter(tdv);PromptSelectionResult psr = ed.SelectAll(sf);
This code gives me an error in the PromptSelectionResult.
What would cause the erro?
is there a way that i can move/ multiple layers at the same time?
View 2 Replies View RelatedI'm using QSELECT to select all objects on a layer, sometimes I need to select objects from 5-7 layers.
Right now I use QSELECT, select 1 layer, click OK, open QSELECT again, select another layer and repeat. Is there a faster way to do this without scripts?
I'm sure some of you do site drawings, how do you measure a curve? Some restaurants or cafes have a rounded serving counter, how you measure the radius to plot into autocad?
I'm trying to select multiple layers in the layers panel on a Mac. I normally do 'command-click' and it works to select many layers. Now, it doesn't work. When I click the second layer, it draws a marquee around it. I need to select multiple layers in order to drop shadow many layers at the same time.
View 3 Replies View RelatedSelect one type layer, as you can see below, the character panel reflects the setting correctly:
Select TWO type layers, with the exact same character attributes.. what happens?
It should say in the image above 36px/52px, not 12.16px (.16 px? Really?) and 17.56.I haven't the foggiest idea where that even comes from.
But the result for all photoshop users is that they have to individually change all the layers individually..I was hoping character styles would work, i have yet to figure out how it even works, i've tried multiple times, it just doesn't do anything to the selected type.
I have found this post from April where the bug was acknowledged in the beta:
[URL].........
I now have the official release of CS6, and I am still seeing this issue. And for clarification, here's what the issue is:
- I start off creating a text layer with a font size of 20px.
- I then transform this layer to make it larger.
- I copy the layer over so I have identical text layers.
- When I select each individually, I am shown the new, larger font size, we'll just say 40px. But when I select both together, it shows the original font size of 20px in the character palette. When I increase the font size with both selected to say 30px, it actually makes the text more like 60px.
Will this bug actually get fixed?
I find it extremely annoying to have to Ungroup named groups and then regroup and rename them in order to do a multiple selection of group members. I find I'm constantly ungrouping and regrouping in order to select/edit.
Note that the multiple items are often not the same type of object (e.g., text, line, shape, etc.).
Am I able to select multiple layers at the same time and delete them at once?
View 5 Replies View RelatedI would like to increase the font size in many text layers at a time by selecting them in the layers panel. The font increases, but the text boxes don't expand to fit the increased size text. So I am having to make each box bigger manually. Is there a way to have the boxes expand to fit bigger text automatically through the layers panel?
View 2 Replies View Relatedhow to convert multiple selections to multiple layers or multiple files with one go?
View 6 Replies View RelatedUsually when I want to work on a different layer, I will select the layer in the layers panel first, or alternatively hold down ctrl and left click on the image in my actual design that's on the layer I wish to change to. However I must have done "something" because now no matter what layer I am on, if I click on a part of my design that's on a different layer to which I am working on, it will automatically select this image and change to this layer. This is highly annoying because every time I am trying to edit something or move something around I suddenly find I am on a different layer again!
I'm not sure how I did this or how to change it back. When I started this design a few days ago it was working normally.
How do i select only a certain layer's and merge or group them together? I though it would be something like... Ctrl + G or etc.
View 4 Replies View RelatedI've been having issues selecting my layers in CS2. The first thing I noticed is that i'm not able to select more than one unless I put them in a folder. The second issue, new tonight as far as i can tell, happens when i'm selecting a layer in the image by clicking on the graphic and and it doesn't select the one i'm on but rather a layer that is turned off in a folder above. Does anyone know if there is something i can do to reset my layer properties?
View 1 Replies View RelatedI used to be able to select a layer by clicking on the layer in the image. Now I have to click on it in the layers palette. How do I correct this.
View 3 Replies View RelatedI have this picture that i would like to make a stencil of.
I have got it down to 7 different colors but i was wanting to know if it is possible to select each color individually. Perhaps in each layer or something
Is there a way to select a layer for editing other than by clicking on it in the layer panel?
I currently have a >200MB xcf file with nearly 100 different layers which I need to adjust before I merge then down a bit. I have found that you can find where the layer is in the list by holding the left mouse button down while hovering the cursor over it, but it always then disappears off the screen and it's a chore trying to find it. I have all the layers named, but it would be a lot more convenient if there was a way to select the layer through the image itself?
How to Apply adjustment layers to multiple layers that have different blending modes and keep the colors the same as the adjustment done?
I work in Animation painting Backgrounds. My files are sometimes upwards to 200+ layers.I will use adjustment layers to quickly balance colours and constrast on top of those many many layers.
The only way that I know of how to apply adjustment layers it to every single layer ( by applying I mean I need to get rid of the adjustment layers because we cant use them in production but i need the new colours be applied to all layers underneath ) in a psd is to manually do it By duplicating the adjusment layer 200+ times and then merging each layer to one of those adjustment layers so that that layer can take the adjustment layers effect permanently.
The issue is that Within Those 200 layers I have some layers set to Multiply or OVERLAY. IT obviously wont apply the adjustment layer properly to those layers because those layer blend mode affect the layers under them. The colour wont be the same anymore in the spots that had the multiply blended mode.
[URL]
I have 2 adjustment layers up top. I need to get rid of them by applying them to each layer! I cannot merge any of the layers. We need all those layers for production.I can apply the adjustment layers manually and this works GREAT for all Layers set to normal. THey take on the colour change just FINE.
However, The issue is that layer 6 and layer 4 are both set to mutiply and this screws up the colour once i apply the adjustment layers to each layer manually...
How can i apply my adjustment layers to a file like this with some layers being set to multiply while keeping the layers exactly the same configuration and The new colour taking effect exactly how i looks before i apply the adjustment layers? Now the simple solution is to merge the multiply layers to the layer that it affects HOWEVER I NEED those multiply layers to be separate!
Adobe says, that you can select a group of frames, edit 1 frame from the group, and it will apply that for the rest of them. In order to do this, it says have one frame selected, the Shift-click another one. I had a frame selected, and then I shift-clicked another. Nothing is highlighting.
View 10 Replies View RelatedWhat needs correcting to enable me to select multiple files using Shift key? It isn't working for me.
View 5 Replies View RelatedImagine a layer containing 10 squares, each square is isolated (none are touching). I need a quick way to put each of those squares on its own layer. Is there something already built in, or any plugin or action?
View 12 Replies View RelatedI have a series of pics (approx 80) that I'd like to load into Elements, with each photo going into a single layer. I google'd a series of old posts where somebody used a "script", but the links are no longer working and that trails is dead.
View 9 Replies View RelatedWhen you're selecting layers directly from an image (using CTRL) you also select adjustment layers, so sometimes you have to lock this layer in order to get to the right layer.
It would be a lot easier to manipulate many layers (usually in my case, most of them have the adjustment layer setting 'attached' to them) if i wouldn't select these 'adjustments' when I click on the canvas. Is it actually possible to do?
I'm now using Photoshop CS6 and I've noticed that selecting all layers is having a major drain of CPU.I've run Activity Monitor and with SAL on the %CPU is showing 238! This seems crazy, but I can't work out why? There must be an error in CS6?
Even without SAL on the %CPU is still reading 131.I am using the mixer brushes and I am aware that these are a big problem in PS, but should it be this bad?
My system:
Mac Pro
2x2.8 GHz Quad Core Intel Xeon
10 GB 800 MHz DDR2
Only running OS and PS CS6 with 3 layers open..image 13M
there are a very strange thing when I select some layers with Move Tool (V). An example:
I have too many layers. If I hide or block some of them and I try to select with the Move Tool (clicking on any layout point and dragging) I can't select it. This is the right behaviour.
The problem appears if those layers are in a group and I hide or block the group. In this case the layers are selected with the same operation. And this is tedious when you have too many layers grouped and you want to block all of them.
Summarize:
- If I block each layer individually, all is right; I can`t select it.
- If I block the group, I can select the layers, and this is wrong.
how to select text layer on transparency? having heck of time with this.
View 3 Replies View Relatedlocked objects get selected, but nothing acts on them. that is i do see them getting dotted while i selected all objects on other unlocked layers. is there way that locked layers don't get dotted while selection? just like in sketchup?
View 5 Replies View RelatedI have a problem with selecting multiple objects!!! Everywhere it says that you have to hold shift and select the objects you wish but when I do this it selects all the objects in between! How can I change this?
View 4 Replies View RelatedI want to move a few snap points on a line but not all of them... Usually I would shift + click each individual snap point and then move but when I have a lot of points it gets pretty time consuming.
If there was a way to drag select multiple snap points in a line.
I have created some shapes within a circle and have used Pathfinder to divide the shapes up and have then deleted some.
With the remaining shapes, I want to change the location of some of the adjacent shape boundaries.
I can do this by dragging across some anchor points with the direct selection tool and can then select the anchor point (for both shape boundaries) to move both lines/boundaries together.
HOWEVER, if I want to change the angle of the boundaries by selecting the handles, it seems I can only select the top anchor moving one of the boundaries and not the other thereby separating the lines?
How I can select multiple handles (that should be on top of each other)?