Illustrator :: Selecting Handles For Multiple Shapes
Oct 19, 2012
I have created some shapes within a circle and have used Pathfinder to divide the shapes up and have then deleted some.
With the remaining shapes, I want to change the location of some of the adjacent shape boundaries.
I can do this by dragging across some anchor points with the direct selection tool and can then select the anchor point (for both shape boundaries) to move both lines/boundaries together.
HOWEVER, if I want to change the angle of the boundaries by selecting the handles, it seems I can only select the top anchor moving one of the boundaries and not the other thereby separating the lines?
How I can select multiple handles (that should be on top of each other)?
View 8 Replies
ADVERTISEMENT
Oct 7, 2012
Any way of selecting an individual bezier handle and moving it by increments using the arrow buttons on the keyboard, (in a similar way to moving an individual point)? At the moment, I have two handles on different adjacent points selected, and am able to move them incrementally using the direct selection tool and the arrow keys, but I don't know how they originally came to be selected (I discovered that they were accidentally), or how to transfer the selection to another handle. I'm using CS6.
View 7 Replies
View Related
Apr 6, 2010
I need to copy shapes over from Illustrator to Powerpoint. Now I'd like to maintain my groups so that I can ungroup them later in Powerpoint. Is that possible? Ideally, Illustrator would copy them in a way for me to change handle positions in Powerpoint later on.
View 17 Replies
View Related
May 7, 2013
In Illustrator CS6, any way to select multiple handles of, say, bezier curves, and collectively move, extend, rotate or retract them? I have found a few plugins for Mac - are there any for Windows?
View 1 Replies
View Related
Jan 25, 2014
I'm going to connect my AI file to After effect. So I had to create lots of layers in order to edit them seperatly in After effects. But it seems like my amount of layers are too large because AE always crashes (not responding -> Force quit)
So I wanna break some stuff down in multiple AI files, but I don't wanna go and select every layer and delete it. That would take too much time. Is there a way to select the multiple objects in Illustrator and delete that but also its layer its in?
View 3 Replies
View Related
Jul 9, 2012
Is there a way to darken the color of multiple shapes all at once? Eg, If I had a number of shapes all in different, pastelle colors and wanted to see how those shapes would look in more prominent, darker vertions of themselves, how would I do that?
E.g., turning the light purple of the shape below to the dark purple in the image.
View 1 Replies
View Related
Feb 23, 2014
I've used the blend tool to create 10 circles going from smallest at the top > largest at the bottom. When I Align > Distribute evenly on the vertical axis - the circles aren't evenly spaced. I'm guessing ai is doing the math from the centerpoint? How can I get them distributed so that the space between each circle is the same. F- 10 px from the top of one circle to the bottom of the one above it.
View 11 Replies
View Related
Feb 11, 2014
Working with scientific figures containing circles, squares, etc in CS4. How can I resize many circles to be 1.5 by 1.5 mm, for example, after they have been skewed a bit to make the entire graph the same size as adjacent figures? In other words, I import the graph from elsewhere and to touch it up I have to resize it a bit. Resizing the whole figure distorts the circle to an ellipse and I want to turn it back into a circle. Takes too long to select each shape and indicate the size.
View 5 Replies
View Related
Mar 17, 2014
My basic goal is to fill this overall flower shape with a colour - its made up of individual outlines. Is there a way I can either fill the whole object with a colour, or somehow make a singular outline of the overall shape of the flower. Dont want to use the pen tool t9o make a quiock outline because I want it to be exact to the lines i've already got. I know I could go and delete sections out and join parts together but I was wondering if there is a quicker trick to this that I'm just not aware of?
View 1 Replies
View Related
Jan 13, 2013
What is the correct technique for selecting paths with multiple strokes of the same colours?
Select Same doesn’t seem to work properly since it only selects one of the stroke colours.
I have several paths with the same stroke colour makeup yet they don’t behave as if they have the same appearance, depending on which of a path’s several strokes is selected in the Appearance panel.
View 4 Replies
View Related
Jan 23, 2013
I work in Ai to build patterns from multiple shapes and colors. At some point in the process, I use the clipping mask to crop away the parts of the build-out I don't want to see/use. Then I copy that cell/tile I want to use, and build repeated pattersn. When I bring all of these tiles together - even at 6400% - no matter how close I get the tiles to each other's edges - flush or even slightly overlapping - there is almost always a white line demarking the edges. Sometimes 3 of 4 edges appear in a centered-x/y axis, but there doesn't seem to be any rhyme or reason to it and I can not reverse engineer the cause.
I have hidden my edges. There is no stroke on a box. Even the clipping path has been checked and does not have stroke. What's going on here? This is a huge stumbling block for my business.
View 6 Replies
View Related
Oct 20, 2013
I created two three dimensional shapes that are extruded at different angles. How do I
1) move one of the shapes so that it intercepts the other shape and
2) find out where the two shapes intercept each other?
View 30 Replies
View Related
Sep 23, 2012
I would like to use a vector object made in AI as a custom shape to be used as a cookie cutter in elements.. I imported the AI file in photoshop but the "define custom shape" entry under "edit" was grayed out.
View 2 Replies
View Related
Jun 24, 2013
When I try to select points in my vector shape (this one is selected), and I have other vector shape behind that one, I start dragging with Direct Selection Tool in order to select those two points, I got selected three points, two from first vector shape, and one more form shape that was behind and in the area where I was dragging selection. Also, now both vector shape become selected. Why is this happening if only one vector shape was selected?
I'm using Photoshop CC.
View 2 Replies
View Related
Nov 22, 2012
In Elements 11 it was announced that selecting difficult shapes like hair for cutting out people etc was a new feature.I actually now know how to do it now because I have a tutorial from Digital Photo Magazine, It didnt feature in the new guided edits or "How To" videos (Why not?)
View 2 Replies
View Related
Sep 23, 2013
I am having problems with my arc tool in illustrator, sometimes it decides to make the handles invisible. making it a very slow process to edit the arch once it is drawn,
to locate the handles I have to grab the end anchor point with the direct selection tool and move the anchor point around, which seems to be the only time the handles for that line or shape become visible. once I realease the mouse, the anchor point are no longer visible. I have to try and remeber where the handle was and keep hovering my mouse around this area until the little "handle" text becomes visible.
This has only happened a couple of times, the first time I re-opened illustrator and I no longer had the problem, but today after reboting illustrator the problem persits.
View 2 Replies
View Related
May 31, 2013
I made a circle and used the direct selection tool (AICS5). I clicked on the bottom point thinking I would pull down and make the shape into a sort of ballon shape, or an upside down teardrop. but I got the shape below. It was very cool, as if I was pulling outward on both handles of the bottom point. But I was unable to repeat it. It reminds me of the time YEARS ago - when by accident, I pulled a milliion copies of a shape and had no idea how I did it. Just last week I found out about the tilde key trick and realized that's what happened!
View 6 Replies
View Related
Jan 25, 2014
When using the pen tool in illustrator I see the handles as I create the object, but when I go to modify it sometimes some of my anchor points don't have handles to manipulate them. I went to show edges, bounding box, and clicked the little handles box but it still doesn't bring handles to certain points I want to curve or straighten.
View 3 Replies
View Related
Mar 1, 2013
Are there any options to specify the "positions" etc. of handles of anchor points in order to be able to shape a little more precise for example for an image that has to be identically left and right shaped?
I'm drawing a Bell (church bell) at the moment and drawing one side first and duplicating and reflecting it works fine to get the perfectly symmetrical shape, but when I want to adjust some handles or shaping, I would like to do this identically left and right without constantly having to adjust one side and duplicate it etc.
View 6 Replies
View Related
Jun 20, 2013
Is there such a thing as a corner anchor point with handles? It's quite a common thing in other vector programs (i.e. Inkscape), but I can't change the direction (angle) of the curve leaving/entering a corner anchor point.
View 4 Replies
View Related
Jul 22, 2013
Using CS6. In the artboard window, I select an artboard tool icon next to an artboard. The artboard displays selected, with the usual grab handles at corners and the middle of sides that in Adobe-world always signal that an object can be resized. I am unable, however, to select the grab handles. When I try to do so, "beep."
An Artboard Options panel has also opened. i can resize the artboard by changing the Width and Height, but I have to guess what I want. If I close this panel, the grab handles go away.
View 1 Replies
View Related
Nov 30, 2012
I'm using CS5 on a PC. I should preface this by saying it's been a long time since I used a vector graphics program, and when I did, it was Macromedia Freehand.
I am creating an object using the pen tool, and I'd like to adjust the curves on either side of an anchor point independently of one another. There was a function to do this in Freehand, but I can't seem to find it's Illustrator equivalent.
View 17 Replies
View Related
Jul 10, 2012
Whenever I have an object grouped, and double click to edit it, I can't get the gradient control handles to show up inside of it.
How can I get them to show up and why did they disappear in the first place?
View 6 Replies
View Related
Jul 2, 2013
I am using a script to move anchor points on a path that I have. When I move the anchors, the handles remain in the same location and I am getting very poor results. I was wondering if there was a way to move handles WITH the anchor points. Basically keep them relative to the anchors.
Below is how I am moving the anchor. I know that you can use leftDirection and rightDirection to move the handles, but I would like them to move the same way they would if you moved the anchors when selecting them in Illustrator.
Set currentPoint = targetPathItem.PathPoints(13)
currentPoint.Anchor = Array(-1537.21, 2735.96)
View 1 Replies
View Related
Feb 22, 2009
Using the drawing tool (line, rectangle, etc.), if I draw a second shape, the first one disappears. What is the procedure for keeping previous shapes before drawing new ones?
View 1 Replies
View Related
Aug 17, 2012
I'm trying to nudge the anchor points on an object randomly (to get an informal look). (I know some Effects do this already.)
Maintaining corner points is no problem - you just set the direction handles to the same coordinates as their anchor.
But I can't nudge a smooth point in the way I want to, which is to move the anchor but maintain the direction handles in exactly the same relation to their anchor as they had before. That is to say, they should remain smooth points.
My script calculates the difference between 'before' and 'after' positions of the anchor, and applies that difference to the direction handles… but in practice the smooth points are converted to corners, because the direction handles don't maintain their relation with the anchor.
var docRef = activeDocument;
var objects = activeDocument.selection.length;
var cShift = prompt("Point shift (pt)",5);
// loop through all objects
for(var count=0;count<objects;count++)
[Code] .....
View 2 Replies
View Related
Apr 26, 2005
i want to have some shapes in one layer in order to control the bledning options all together!
View 9 Replies
View Related
Oct 3, 2011
I often have to import shapes via illustrator export/import. Then I have to scale all the shapes up to real world 1:1 size.
I typically just grab all objects and use the SCALE tool...but I hear that is actually the WRONG approach?
So I tried scaling all the objects at a sub-object level. i.e. select ONE object, yellow highlight vertex, segment or spline... then scale up.
Is it possible to select multiple/all my shapes and scale up this way? When I select all of them, my modifier stack obviously disables and cannot select via sub-object (vertex, segment or spline level).
I tried grouping. modifier stack disables still. Do I have to ATTACH each one to another (multiple I guess via list?) and then scale all them via SEGMENT level?
Is there a easier/faster way to do lots of objects imported like this...or is this the way to do it?
View 8 Replies
View Related
Feb 14, 2012
Adobe says, that you can select a group of frames, edit 1 frame from the group, and it will apply that for the rest of them. In order to do this, it says have one frame selected, the Shift-click another one. I had a frame selected, and then I shift-clicked another. Nothing is highlighting.
View 10 Replies
View Related
Apr 27, 2012
I've just upgraded to Corel X5 and cannot find a way of selecting more than one layer at a time in the Object Manager docker. (With X3 I simply held down Shift and selected however many layers I wanted). I sometimes need to select dozens of layers at once to delete them or switch off visibility - surely not one at a time? How is this done in X5?
View 14 Replies
View Related
Sep 14, 2012
What needs correcting to enable me to select multiple files using Shift key? It isn't working for me.
View 5 Replies
View Related
