I need to copy shapes over from Illustrator to Powerpoint. Now I'd like to maintain my groups so that I can ungroup them later in Powerpoint. Is that possible? Ideally, Illustrator would copy them in a way for me to change handle positions in Powerpoint later on.
View 17 Replies1. With the pen tool/selection tools, if i've made a point and it has no control handles, how do i make it so that it has control handles?
2. If a point has 2 control handles, how do I delete one of them?
3. When im working on a path how do I make it so that PS doesn't create a vector mask based on that path every time I create an adjustment layer?
versed on controlling points in Illustrator, but some of those dont carry over to Photoshop.
I've used earlier version of Adove Illustrator without any problem, but once I start trying CS6, I cannot copy a graph that I inserted from GraphPad to Microsoft PowerPoint. I converted GraphPad file from version 6 to version 5 and then some of file can be copied & pasted to Illustrator Artboard. Most of them cannot be copied properly. It shows only axis title with empty box way far away from Artboard.
View 3 Replies View RelatedHow do you copy and paste a graphic from Illustrator CC to Powerpoint?
I know that sounds easy, and it should be...I used to be able to do this the standard way (ctrl+c in Illustrator, ctrl+v in Powerpoint), however now the result is just a load of code inside Powerpoint and no image. (other than exporting as pngs etc.)
I'm on the latest version Illustrator CC, Powerpoint 2011 for Mac, Mac OS 10.9.1
I have created some shapes within a circle and have used Pathfinder to divide the shapes up and have then deleted some.
With the remaining shapes, I want to change the location of some of the adjacent shape boundaries.
I can do this by dragging across some anchor points with the direct selection tool and can then select the anchor point (for both shape boundaries) to move both lines/boundaries together.
HOWEVER, if I want to change the angle of the boundaries by selecting the handles, it seems I can only select the top anchor moving one of the boundaries and not the other thereby separating the lines?
How I can select multiple handles (that should be on top of each other)?
This problem has never been in CS6, it is only in the CC. When I past an object from Illustrator CC to PowerPoint I see unexplaned code.
View 2 Replies View RelatedWhenever I have an object grouped, and double click to edit it, I can't get the gradient control handles to show up inside of it.
How can I get them to show up and why did they disappear in the first place?
When using the pen tool in illustrator I see the handles as I create the object, but when I go to modify it sometimes some of my anchor points don't have handles to manipulate them. I went to show edges, bounding box, and clicked the little handles box but it still doesn't bring handles to certain points I want to curve or straighten.
View 3 Replies View RelatedIs there such a thing as a corner anchor point with handles? It's quite a common thing in other vector programs (i.e. Inkscape), but I can't change the direction (angle) of the curve leaving/entering a corner anchor point.
View 4 Replies View RelatedI want to insert a layer into one of my video groups. But when I do I want all of the layers in all of the selected groups to move holding therei relative position. e.g. i have a text layer positioned at a certain time in a Clip B. I want to insert another clip right before this clip which will shove Clip B to the right. I want the text layer to move also keeping its relative position to Clip B. The text clip is in a different video group from that of the underlying layer that is being shoved over.Restated, I want to hold all the clips and layers in position so that when I insert another clip everything moves holding their positions relative to each other.
View 3 Replies View RelatedIn the screen grab here, you can see that "errors" in gradient smoothness coincide with control points..or maybe between certain control points....is there a way to prevent this error from happening?
View 7 Replies View RelatedWhen I select an element, in this case a building, to make changes, the entire file is selected instead of the building. There is nothing to ungroup when this happens.
View 1 Replies View RelatedI have read several other threads on this issue where the control overlays are missing when you go to Filter>Render>Lighting Effects. The "answer" from Adobe always seems to be, "updated your video card drivers."
I have a ATI Mobility Radeon™ HD 560v for my Dell laptop running Windows 7 64bit. I have checked both through Dell and the ATI page and I have the latest drivers but Lighting Effects don't work properly. So now what?
I tried messing with the Preferences for Performance based on other posts. No luck. When I go to View>Extras>Show All I do then see the controls, however, the program freezes then crashes every time.
do I have to go back to CS4 to do all my lighting effects?
I have a couple points that were part of an import event (data from a previous project) which I want to assign as control points for an incoming traverse, is there any way to assign those as control points? I can't seem to find a way to do that other than perhaps re-importing the specific points as control points and overwriting the existing ones.
View 2 Replies View RelatedI'm using Civl3D 2013 and I have a drawing that crashed and a recover dwg was created.
I ran the recovery and now the points and groups are gone. Is there a way to get them back?
I can go back to an older drawing. But, i'm trying to avoid losing a few hours of cleanup.
Is this just one of the bugs that is in Civil3D?
Civil3D 2013
Dell Optiplex 9010
Intel I-7 3770 CPU @ 3.4 Ghz
16 gb RAM, 64 bit
I have created 8 points (from 4 locations with 2 depths in each location) in _All Points/Points. These 8 points are grouped into 2 Point Groups:
Points #1, #3, #5 & #7 for Point Group - (1) Depth#1 and
Points #2, #4, #6 & #8 for Point Group - (2) Depth#2.
The "Name" of Point is filled with the SampleID (like cdc-ss01-s1, cdc-ss01-s2,...) - see the attached file. From the HELP of AutoCAD C3D 2013, I have read/studies the "Point Tables" and "Point Label Styles" and I cannot figure out how to label the 8 points to show the "Point Number", "Point Elevation", and "Name" of Point (i. e. the SampleID like cdc-ss01-s1 & cdc-ss01-s2, ....).!!
Is there a way to create automatic Point Groups when importing points? Sort of like a Desc Key for layers? I know it probably is impossible but I have to ask.
View 1 Replies View RelatedI am having a problem with copy/paste of drafting elements (detail lines, detail items) from one view to another. Basically, I am copying a detail of section created in a ‘Drafting View’ onto an actual wall ‘Section View’. Then I receive an error message that cannot be ignored saying [Cannot paste view-specific elements from different views]. So I am not sure what is happening. The elements that I am copying and pasting are mainly drafting work.
I also noticed that copy/paste part of the drafted work sometimes work. But when I copy the whole drafted work from ‘Drafted View’ to ‘Section View. It gives me the error!!
I'd like to be to select a layer groups and copy them over to another pre-existing image.
I've been struggling with this for an hour or so, and I haven't found a way to do this.
Is is possible to do this in GIMP?
The closet I've found is a kind of paste where you do this: drag the tab of the origin image over to the tab of the target image. The result is a new layer in the target image called "dropped buffer". However, the entire origin image is imported flattened.
I've been trying other drag and drop operations, but without success. Usually when I drop the selection to the target image, the icon under the mouse dissapears, and nothing actually happens.
I thought this might be a window manager problem. But I get the same results across kde, gnome and xfce.
I would like to use a vector object made in AI as a custom shape to be used as a cookie cutter in elements.. I imported the AI file in photoshop but the "define custom shape" entry under "edit" was grayed out.
View 2 Replies View RelatedI need to multiple select two control points on a box. Control, shift, other key combinations, etc. are not working. Control works in other apps; don't know why this is going on.
Any alternative to the key stroke for multiple selects in 3DS MAX?
I've VideoStudio x5 and I try to delete volume control points from my clip in the Sound Mixer. Tooltip says "Delete this control by dragging outside the clip" but it doesn't work.
View 2 Replies View RelatedIs there a way to add the number of control points on the leaders? if i need to make it bend multiple times, is that possible?
currently i have two, one to control a "kink" and one to control the end point. can you add more to it or adjust a setting?
How to set 2 adaptive points (AP) to control the position and diameter of a circle. Have tried setting a ref plane driven by circle dia param but justs results in overconstrain when flexed. Is it possible to a) lock the centre to an AP and lock redius to AP?
Is it possible also to lock a ref plane to an AP so that the AP drives it rather than the other way round?
Possible to view the control points of a 2d or 3d object. I know that we can view the control points for spline objects, but is it possible to view the control points also for every other object i draw?
View 2 Replies View Relatedwhat does it depends that how many control points are on an object in Designer Pro as default?
For example in Shape Tool creating a horizontal line (click and somewhere beside CTRL - click), at me it creates control points at the end of the lines plus two ones on the line.
That is super anyway because immediately can be seen where is the 33% of the line length, but could be set somehow this that how many control point should be as default?
When I make my rooms for a building, I want them to be a specific distance from the previous wall, say 10'. But when Revit measures the walls, it measures from the center line of the wall and not the edges. How do I correct this so it is measuring from the nearest edge so I'm not constantly having to think about how thick the wall was on each side and manually add 5 inchs or whatever it is in order to get a solid 10' room.
Also, when placing rooms, I have found that the program keeps making the reference distances from points halfway across the house. For example, if I want to make a room 10'x 10', and go to place the top wall of the room. If there is another wall across the hall or something that may intersect if you extend an imaginary line, the reference dimensions won't be 10' from the bottom wall, but it would be something like 4' 5 7/16" from that other room that has nothing to do with the wall I'm trying to place. Does that make sense? How do I turn off or control the meaningless reference points?
Is it possible to create a shape and then edit the coordinates of the shape's control points? When I currently click on a shape's control point, it doesn't offer any way to fine tune the location of that point by manually typing in the X, Y coordinate.
View 2 Replies View RelatedIn Curves, when you want to see the deepest blacks and whitest whites, you hold down Option while clicking and dragging the balck and white sliders – and the dragging doesn't allow accurate control. It's okay, but I would find it better if I could nudge the black and white sliders from the keyboard while seeing the effect on the image. Is that possible when using Curves as an adjustment layer?
View 12 Replies View RelatedHow does one implement the use of two pivot points to control movement concurrently in the X- and Y-plane?
I 've added a Link Constraint to the salmon colored component which is linked to the red cylinder pin at far left. This pin has a Path Constraint to an Arc path which is orientated left-to-right and arching up. The pin at right has a line Path Constraint that moves down and to the right. Still image 01 shows the retracted position. Still image 02 shows the animation at 50%, the Fowler hinge follows nicely the path of the left most pin quite well. Notice no movement occurs in the down direction that would be imposed by the right pin - if it worked/was set up properly.
Any way of viewing the coordinates of the Control Vertices (Control Points) of 3d or 2d NURBS Surfaces. I tried to use the "properties" of the 3d NURBS surface that i designed but i could not find them anywhere..
i would also like to ask if it is even possible to export these coordinates to txt or even more to Excel.