Photoshop :: Points And Control Handles
Aug 6, 2003
1. With the pen tool/selection tools, if i've made a point and it has no control handles, how do i make it so that it has control handles?
2. If a point has 2 control handles, how do I delete one of them?
3. When im working on a path how do I make it so that PS doesn't create a vector mask based on that path every time I create an adjustment layer?
versed on controlling points in Illustrator, but some of those dont carry over to Photoshop.
View 8 Replies
ADVERTISEMENT
Apr 6, 2010
I need to copy shapes over from Illustrator to Powerpoint. Now I'd like to maintain my groups so that I can ungroup them later in Powerpoint. Is that possible? Ideally, Illustrator would copy them in a way for me to change handle positions in Powerpoint later on.
View 17 Replies
View Related
Jun 28, 2013
I have read several other threads on this issue where the control overlays are missing when you go to Filter>Render>Lighting Effects. The "answer" from Adobe always seems to be, "updated your video card drivers."
I have a ATI Mobility Radeon™ HD 560v for my Dell laptop running Windows 7 64bit. I have checked both through Dell and the ATI page and I have the latest drivers but Lighting Effects don't work properly. So now what?
I tried messing with the Preferences for Performance based on other posts. No luck. When I go to View>Extras>Show All I do then see the controls, however, the program freezes then crashes every time.
do I have to go back to CS4 to do all my lighting effects?
View 5 Replies
View Related
Jul 10, 2012
Whenever I have an object grouped, and double click to edit it, I can't get the gradient control handles to show up inside of it.
How can I get them to show up and why did they disappear in the first place?
View 6 Replies
View Related
Aug 17, 2012
I have a couple points that were part of an import event (data from a previous project) which I want to assign as control points for an incoming traverse, is there any way to assign those as control points? I can't seem to find a way to do that other than perhaps re-importing the specific points as control points and overwriting the existing ones.
View 2 Replies
View Related
Jan 25, 2014
When using the pen tool in illustrator I see the handles as I create the object, but when I go to modify it sometimes some of my anchor points don't have handles to manipulate them. I went to show edges, bounding box, and clicked the little handles box but it still doesn't bring handles to certain points I want to curve or straighten.
View 3 Replies
View Related
Jun 20, 2013
Is there such a thing as a corner anchor point with handles? It's quite a common thing in other vector programs (i.e. Inkscape), but I can't change the direction (angle) of the curve leaving/entering a corner anchor point.
View 4 Replies
View Related
Jun 19, 2012
Is it possible to create a shape and then edit the coordinates of the shape's control points? When I currently click on a shape's control point, it doesn't offer any way to fine tune the location of that point by manually typing in the X, Y coordinate.
View 2 Replies
View Related
Jun 9, 2013
In Curves, when you want to see the deepest blacks and whitest whites, you hold down Option while clicking and dragging the balck and white sliders – and the dragging doesn't allow accurate control. It's okay, but I would find it better if I could nudge the black and white sliders from the keyboard while seeing the effect on the image. Is that possible when using Curves as an adjustment layer?
View 12 Replies
View Related
Nov 25, 2011
I need to multiple select two control points on a box. Control, shift, other key combinations, etc. are not working. Control works in other apps; don't know why this is going on.
Any alternative to the key stroke for multiple selects in 3DS MAX?
View 1 Replies
View Related
Nov 18, 2012
In the screen grab here, you can see that "errors" in gradient smoothness coincide with control points..or maybe between certain control points....is there a way to prevent this error from happening?
View 7 Replies
View Related
Aug 3, 2012
I've VideoStudio x5 and I try to delete volume control points from my clip in the Sound Mixer. Tooltip says "Delete this control by dragging outside the clip" but it doesn't work.
View 2 Replies
View Related
Jul 19, 2011
Is there a way to add the number of control points on the leaders? if i need to make it bend multiple times, is that possible?
currently i have two, one to control a "kink" and one to control the end point. can you add more to it or adjust a setting?
View 1 Replies
View Related
Dec 3, 2012
How to set 2 adaptive points (AP) to control the position and diameter of a circle. Have tried setting a ref plane driven by circle dia param but justs results in overconstrain when flexed. Is it possible to a) lock the centre to an AP and lock redius to AP?
Is it possible also to lock a ref plane to an AP so that the AP drives it rather than the other way round?
View 9 Replies
View Related
Jul 24, 2013
Possible to view the control points of a 2d or 3d object. I know that we can view the control points for spline objects, but is it possible to view the control points also for every other object i draw?
View 2 Replies
View Related
Dec 4, 2011
what does it depends that how many control points are on an object in Designer Pro as default?
For example in Shape Tool creating a horizontal line (click and somewhere beside CTRL - click), at me it creates control points at the end of the lines plus two ones on the line.
That is super anyway because immediately can be seen where is the 33% of the line length, but could be set somehow this that how many control point should be as default?
View 4 Replies
View Related
Sep 28, 2012
When I make my rooms for a building, I want them to be a specific distance from the previous wall, say 10'. But when Revit measures the walls, it measures from the center line of the wall and not the edges. How do I correct this so it is measuring from the nearest edge so I'm not constantly having to think about how thick the wall was on each side and manually add 5 inchs or whatever it is in order to get a solid 10' room.
Also, when placing rooms, I have found that the program keeps making the reference distances from points halfway across the house. For example, if I want to make a room 10'x 10', and go to place the top wall of the room. If there is another wall across the hall or something that may intersect if you extend an imaginary line, the reference dimensions won't be 10' from the bottom wall, but it would be something like 4' 5 7/16" from that other room that has nothing to do with the wall I'm trying to place. Does that make sense? How do I turn off or control the meaningless reference points?
View 1 Replies
View Related
Nov 11, 2012
When I select an element, in this case a building, to make changes, the entire file is selected instead of the building. There is nothing to ungroup when this happens.
View 1 Replies
View Related
Oct 23, 2013
How does one implement the use of two pivot points to control movement concurrently in the X- and Y-plane?
I 've added a Link Constraint to the salmon colored component which is linked to the red cylinder pin at far left. This pin has a Path Constraint to an Arc path which is orientated left-to-right and arching up. The pin at right has a line Path Constraint that moves down and to the right. Still image 01 shows the retracted position. Still image 02 shows the animation at 50%, the Fowler hinge follows nicely the path of the left most pin quite well. Notice no movement occurs in the down direction that would be imposed by the right pin - if it worked/was set up properly.
View 1 Replies
View Related
Sep 6, 2013
Any way of viewing the coordinates of the Control Vertices (Control Points) of 3d or 2d NURBS Surfaces. I tried to use the "properties" of the 3d NURBS surface that i designed but i could not find them anywhere..
i would also like to ask if it is even possible to export these coordinates to txt or even more to Excel.
View 1 Replies
View Related
Jan 13, 2012
Running C3d 2012 here, but haven't used prior versions. I'm using fieldbooks to import survey data. If there is an error of some kind and I "Re-import event" for the fieldbook, then the occupied points from the field book are deleted out of the survey database and I get the resulting error of "point invalid" during the import. My fix is to go into my control drawing and import the control points from the drawing into the survey database then run the "re-import" again.
View 9 Replies
View Related
Oct 24, 2013
What I want to do is change multiple splines from "Show Control Vertices" to "Show Fit Points"
The problem is I have over 500 to do, and I cannot select each one individually and do it. It would do my head in.
Is there any way to change multiple splines all at once?
View 9 Replies
View Related
Nov 8, 2012
Using AutoCAD 2013 and TOL command to generate feature control frames. We set our lineweights based on layer assignments.
Problem is that when printing, AutoCAD seems to randomly assign a lineweight to the feature control frames. It can vary from what it's supposed to be (such as lineweight set for the dimension layer) or thicker than even what the object lines are set at. Seems to pick a random linewieght at time of printing for these elements (just the boxes, not the symbols/text itself).
Is there a setting we should be defining somewhere to force it to follow the lineweight of the layer that it has been assigned to? Known bug?
View 4 Replies
View Related
Jul 5, 2006
I have a file that is 13 x9. In print dialogue box I used the bounding handles to shrink it to 9x6.
Now today I want to print at true file size. I open image size dialogue box and it is still 13x9. But when I open print dialogue box it still says 9x6? why? and it look 9x6 in the preview, not 13 x9 which is the real size of file -- so I'm confused.
If I type in 13 x9 or use bounding handles again to get 13 x9 am I now upresing the file??
View 6 Replies
View Related
Mar 9, 2009
When I open the crop tool I only get crop handles on the four corners of the crop area. The crop handles at the midpoints do not appear. (I get only 4 handles, not 8 handles.)
View 6 Replies
View Related
May 15, 2012
when you create a line with the pen tool then add an extra anchor point, how do you move that point without the handles creating a curve.
Can you remove the handles?
View 3 Replies
View Related
Oct 5, 2012
I am trying to use the Iris Blur in CS6, but no handles are showing up for any of the blurs in the blur gallery. I've restarted the program and my computer and tried different files, still no luck. The pallette will open up and I can see blur but no handles. Is there some way that I could have accidently turned them off? When I first got the program it worked fine..
View 5 Replies
View Related
Mar 6, 2008
PS CS2 on Win XP
Is that your experience as well? Can I change it?
View 2 Replies
View Related
Feb 6, 2009
Photoshop 7 has suddenly stopped showing object handles, so I am unable to resize or transform a portion of an image that I have selected. I can find no instructions as to how I can get the handles to show again.
View 3 Replies
View Related
Jun 5, 2006
i want to be done is, changing the color to black, add tint, and some new wheels, and get rid of the door handles.
View 7 Replies
View Related
Aug 9, 2012
Just starting to work with CS6. I click on a path, which shows the path nodes.... then go to the top menu interactive menu bar at the top of the screen to 'click-ON' the checkbox to display the path's transform corner handles.... and discover it is no longer there?
Where the heck did they put it? Don't tell me Adobe deleted this basic and oft - used function and made it a multi-finger, cluster-hump keyboard ONLY command?
Can I get this feature to display at the top menu header bar again?
View 6 Replies
View Related
