AutoCAD Civil 3D :: Points And Groups Are Gone After Drawing Recovery

Jun 14, 2013

I'm using Civl3D 2013 and I have a drawing that crashed and a recover dwg was created.

I ran the recovery and now the points and groups are gone. Is there a way to get them back?

I can go back to an older drawing. But, i'm trying to avoid losing a few hours of cleanup.

Is this just one of the bugs that is in Civil3D?

Civil3D 2013
Dell Optiplex 9010
Intel I-7 3770 CPU @ 3.4 Ghz
16 gb RAM, 64 bit

View 7 Replies


AutoCAD Civil 3D :: 2013 / How To Label (Name) Of Point In 2 Points Groups

Aug 12, 2013

I have created 8 points (from 4 locations with 2 depths in each location) in _All Points/Points. These 8 points are grouped into 2 Point Groups:

Points #1, #3, #5 & #7 for Point Group - (1) Depth#1 and
Points #2, #4, #6 & #8 for Point Group - (2) Depth#2.

The "Name" of Point is filled with the SampleID (like cdc-ss01-s1, cdc-ss01-s2,...) - see the attached file. From the HELP of AutoCAD C3D 2013,  I have read/studies the "Point Tables" and "Point Label Styles" and I cannot figure out how to label the 8 points to show the "Point Number", "Point Elevation", and "Name" of Point (i. e. the SampleID like cdc-ss01-s1 & cdc-ss01-s2, ....).!!  

View 5 Replies View Related

AutoCAD Civil 3D :: Create Automatic Point Groups When Importing Points?

Jan 8, 2014

Is there a way to create automatic Point Groups when importing points?  Sort of like a Desc Key for layers?  I know it probably is impossible but I have to ask.

View 1 Replies View Related

AutoCAD Civil 3D :: Drawing Recovery Palette Error And Crash?

Mar 6, 2013

I had a corrupted file that crashed every time it's opened. Now the drawing recovery manager has this message when i click on the folder to try and remove the temp files. how to remove the recovery folders so this doesn't keep happening?

Drawing Recovery Palette Error Message:

Civil 3D x64 2012
Win 7 x64 Ultimate
I7 3820 (3.6ghz quad core with HT)
32gig RAM (Corsair XMS3 4x8g)
Intel x z79 mobo (BOXDX79TO 2011 socket)
Radeon HD 7850 2gb GDDR5

View 4 Replies View Related

AutoCAD Civil 3D :: Figure Groups And Survey Point Groups

Oct 15, 2009

I just discovered survey figure groups and am playing around with them. Great way to bring certain figures in & out. What seems crazy is that I have to check them on/off one at a time. Am I missing something or is this the only way to add figures to a figure group?

View 2 Replies View Related

AutoCAD Civil 3D :: Drawing Points Using GPS

Sep 10, 2013

How can I draw points in Civil 3d using GPS coordinates?

Is it any way to input the coordinates manually if i have only a few key points, and then superimpose my topography or other objects? or should I insert a data file to get the points first? How can I upload the data file from my GPS tool, and how to figure out in which format to insert it?

I  would like to draw with using the GPS coordinates itself, NOT the northing and easting( X,Y,) is it possible?

View 9 Replies View Related

AutoCAD Civil 3D :: Points Will Not Display In Drawing?

Oct 9, 2012

I have a drawing where points that I create will not display.
I have created points in this drawing before.Previously created points display fine.Points created in another drawing and imported into this drawing display fine.All layers have been turned on and thawed, to make sure it's not a layer issue."All points" point group is the top point group.When I create a point manually everything seems to work fine, info is echoed to the command line, etc., but then nothing happens. Obviously it's a setting somewhere, but it is driving me up the wall trying to figure out what setting.  I'm sure I will slap my forehead when told what it is. 

Windows 7-64
AutoCAD Civil 3D 2013

View 4 Replies View Related

AutoCAD Civil 3D :: Inserting Points Into Drawing?

Mar 6, 2013

Under Toolspace/Survey/Survey Point I have a series of points shown.  These are not shown under points in the prospector tab. How to insert these into my actual drawing?

View 2 Replies View Related

AutoCAD Civil 3D :: Points Disappearing From Drawing

Feb 29, 2012

Using Civil 3D 2011, I have a topo drawing that's about 2 miles long.  The points have styles to them to show the actual survey item such as manhole, trees, signs, etc.  I have also created a point group called "no display" that I have added certain points to so they don't show up in the topo.  While adding additional points to the "no display" point group, I have noticed that ALL the points but 3 have vanished from the drawing.We just installed the SP2.

View 9 Replies View Related

AutoCAD Civil 3D :: Points In Drawing Coverts To Mm

Feb 26, 2013

I have imported a fieldbook Civil 3D and the co-ordinates all look in the point file. But when I insert them in to the drawing they are converted to mm (decimal shift 3 to the right).  I can not seem to change this.  

I opened a new drawing made sure the drawing units were meters etc etc, and still the drawing come in and are moved to mm positions. The point file still shows everything is correct in meters and I even click on the point in the drawing and list it and it lists correct in meters.  But the co-ordinates are in mm inside the drawing. Dimensions between them is in mm also.

View 2 Replies View Related

AutoCAD Civil 3D :: Update Survey Points In Drawing

Jun 27, 2012

Here is my procedure.

1. Import survey point via ascii file into a new drawing call it Field-dwg.
2, Create a survey data base
3. Import all points in the the data base under import event.
4. open existing drawing, work-dwg, import points as needed from the Survey Data Base.

Problem : Survey points needs be renumber. 

I goto field-dwg, and fix the points (renumber).

open survey data base for edit, and import Event, field-dwg/points/update :  nothing happen

also try Import Event, field-dwg, survey points, update : nothing happen

so I re-import the points, all is good.

Then I goto work-dwg, and  try to update the point, nothing happen.

View 5 Replies View Related

AutoCAD Civil 3D :: Drawing Polylines From Points Not Working?

Jul 1, 2013

I have points in a 2012 C3D drawing and I am looking to draw 3d polylines from point to point.  Ultimately I am wanting to generate breaklines for a surface from a topo.  I was able to do this a few months ago and now no matter what I try nothing seems to work.  When use the 3P command the Z Vertex is 0.  All of the points in the drawing have elevations. I tried drawing a feature line however, the beginning elevation is saying 0.  Its as if these lines do not recognize my points as having elevations. 

View 6 Replies View Related

AutoCAD Civil 3D :: Copy Cogo Points From One Drawing To Another

Mar 11, 2011

I would like to copy cogo points from one drawing to another, keeping both their layer and user defined properties.

I can:

1. Do a copy and then paste to orginal co-ords. This keeps the layers but loses the UDP's.

2. Export the points to a csv and import into new drawing. This keeps the UDP's but loses layers

3. Export to XML. This loses both Layers and UPD's

I don't have a desc key file setup for the codes on these pts so this is not an option.

View 9 Replies View Related

AutoCAD Civil 3D :: Displaying Points In Drawing As Manually Create Them?

Feb 20, 2013

I was wondering if there is a setting somewhere that can be turned on to display the manual points I am creating as I create them instead of having to go back and update the point group before they display in the drawing?

View 1 Replies View Related

AutoCAD Civil 3D :: Contours And Points Disappear When Saving Drawing

Jun 6, 2012

I just installed AutoCAD 2010 Civil 3D on a 32 bit Windows 7 machine. When I open a dwg sent from a surveyor I can see and manipulate all the linework, contours, points, and SRF breaklines in the drawing. When I proceed to save the file to my computer and reopen it, the contours and points disappear; however all linework and surface breaklines remain. The two files that I have been working with were saved originally in 2004 and 2007 format. I have tried saving to their respective versions but that has not worked.

The only way that I have been able to retain these objects is by first exploding them and making them into a block and later inserting them into the other drawing. If I try to make them into a block without exploding them they also disappear. 

Is there a way to retain all drawing objects directly from saving?

View 2 Replies View Related

AutoCAD Civil 3D :: Drawing Lines To Cogo Points Hangs Up

Feb 23, 2012

When I start to draw my polylines to cogo points I have inserted in my drawing it keeps wanting to hang up when I hover over the point. I have set up my point styles to bring in our points with all the attribute information so I am thinking it keeps trying to read all that info as soon as my mouse hits it..

I saw a post about rollovertips but that did not change anything. Any ides what might be causing this? Im using Civil3D 2011.

View 2 Replies View Related

AutoCad :: How To Close Drawing Recovery Manager

Jan 16, 2012

I have this pan open I left side of my AutoCAD 2010. How can I close it?

I don't see any cross on top of the pan to close it.

View 1 Replies View Related

AutoCAD Civil 3D :: Create Point Group Of Random Points Within Drawing?

Oct 15, 2013

Is there a way to create a point group of random points within a drawing and adjust the elevations for the points within that group? Some of the points in the group may have been manually created and some may have been imported by way of "Import Events"..

View 3 Replies View Related

AutoCAD Civil 3D :: Survey Points With Ground Coordinates Are Scaled Inserted Into Drawing?

Sep 5, 2013

Using Civil 3D 2013Coordinates coming out of survey equipment are modified state plane GROUND (scaled up from the origin by the combined factor).Drawing is setup with state plane coordinate system with user defined transformation to establish geodetic reference and the ability to label lat/long or import Bing map data.Survey database is setup with "No Datum, No Projection" (data is already at ground, I don't want ot transformed).Import style is PNEZD and is set to use Northing/Easting not Grid Northing/Grid Easting.After importing points into survey database, coordinates of survey points match the CSV.  This is good.After importing points from database to drawing, they are taken as grid coordinates, are scaled again and are off ~5,300 feet northeast.Why would Civil 3D assume the points in the database are grid and scale them when the import style used did not specify grid?  Is there a setting or something I can do to tell Civil 3D to leave my coordinates alone?

View 9 Replies View Related

AutoCAD Civil 3D :: 2013 - Drawing Hangs On Opening (Upgrading COGO Points)

Feb 4, 2013

On opening a C3D 2013 drawing, C3D hangs for about 5 minutes.  At the bottom of the screen is the message: "Upgrading COGO points".  This drawing is only 974KB. 

The drawing is being opened from a network . I tried saving it on a local hard drive.  That had no effect. 

View 3 Replies View Related

AutoCAD 2010 :: Unable To Double Click - Can't Close / Open Drawing In Recovery

Sep 25, 2012

The user is running Autocad 2010, and she was able to perform this function last week.  Nothing has changed, and a system reboot did not correct the issue. 

View 2 Replies View Related

Illustrator :: Copy Shapes To Powerpoint But Maintain Groups Or Even Control Points / Handles

Apr 6, 2010

I need to copy shapes over from Illustrator to Powerpoint. Now I'd like to maintain my groups so that I can ungroup them later in Powerpoint. Is that possible? Ideally, Illustrator would copy them in a way for me to change handle positions in Powerpoint later on.

View 17 Replies View Related

AutoCAD Civil 3D :: Export Points To Datacollector And Create Points List

Feb 8, 2013

I had to create a boundary map and place points to all corners. How to export these newly created points back into my data collector (Ranger) and also I'm trying to figure out how to print out a points list. 

I stumbled on to this thread but I guessing that it's a different CAD year because my modify tab doesn't look like this. URL.....

View 4 Replies View Related

AutoCAD Civil 3D :: Large Surface - Converting Points To Cogo Points

Mar 5, 2013

I have a large surface (over 1.5 million points and 20 000hectares)

I need to get a point file .csv from the TIN to be able to use it in another program.

-so i've extracted the points from my surface, but they are Autocad points.

-next step is to convert them to civil 3d points.

-I can not select them all when converting them or my computer crashes.

-so i select about 25 000 at a time, the converting takes roughly 10 minutes.

and i have over 1.5 million points to do.

how can i speed this up.

will more ram useful?

View 9 Replies View Related

AutoCAD Civil 3D :: Converting Points To COGO Points Naming?

Oct 9, 2012

I have recieved a file with many points and would like to convert them into COGO points in Civil 3D. The problem is; I would like to keep the hole ID's as I convert, I've made a few conversions and lose the hole ID every time (not showing in Name or Description). Is there a seting I am missing to keep these? My aim to to organize the COGO points in different point groups.

View 3 Replies View Related

AutoCAD Civil 3D :: Designating Points As Control Points

Aug 17, 2012

I have a couple points that were part of an import event (data from a previous project) which I want to assign as control points for an incoming traverse, is there any way to assign those as control points?  I can't seem to find a way to do that other than perhaps re-importing the specific points as control points and overwriting the existing ones.

View 2 Replies View Related

AutoCAD Civil 3D :: Moving Points Out Of All Points Group?

Apr 10, 2013

I have a project that was started by leaving all the survey data inside the "All Points" group.  So, I'm concerned that when I enter my as built survey points, that even if I put them into their own group, that the original surface will still look at them and just rebuild to my asbuilt data, effectively cancel out the purpose of the asbuilt survey.  Will this happen? 

I want to take the original points and put them into a group of their own, but I don't know if that will affect anything or not?  I have several wetlands already designed on that surface with volume calcs already done too. 

What should I do? 

View 9 Replies View Related

AutoCAD Civil 3D :: Templates And Point Groups

Sep 27, 2012

Can you create point groups in your template to be used by all drawings or do they have to be per dwg.?

View 7 Replies View Related

AutoCAD Civil 3D :: Point Groups Elevations

Feb 28, 2013

I have two different point groups that I am using in my drawing.  One is from a survey done a few years ago and the other is from one that I did just the other day. 

I don't have a problem inserting the points or whatnot, but the issue I am having is that when I click "Datum" to adjust the elevations of my new point group (to make my benchmark 100.00'), Civil 3D alters all of my points; including the ones from the older survey. Is a way to adjust elevations to only one set of points.  

View 7 Replies View Related

AutoCAD Civil 3D :: Produce Groups Without Alignment

Mar 6, 2012

I have a drawing and i don't use alignment in this drawing , what i need is to produce (view frame groups). Can i produce the groups without alignment.

View 3 Replies View Related

AutoCAD Civil 3D :: Grading Groups And Surfaces?

Jul 8, 2013

I have created several pond embankments using the grading tools and have created surfaces using the grading groups. The problem I am having is when I turn on the triangles for one surface, I get the triangles for all the embankments and EG. The software keeps adding to the EG and doesn't cut out each embankment. I know I'm missing a step but I'm unable to find it.

View 7 Replies View Related

Copyrights 2005-15, All rights reserved