AutoCAD Civil 3D :: Inserting Points Into Drawing?
Mar 6, 2013Under Toolspace/Survey/Survey Point I have a series of points shown. These are not shown under points in the prospector tab. How to insert these into my actual drawing?
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Inserting Points On Specific Layer?
May 31, 2012I have made an add-in that automates the insertion of points on a surface and I am trying to find out how to put these points on a specific layer. I guess that changing the "standard" default Point style would do the trick, but I can't find the objects to use in the Civil3D API.
Civil3D 2012
VS 2010, VB or C#
AutoCAD Civil 3D :: Inserting And Aligning Live Map To Drawing?
Sep 16, 2013i am trying to attach a live map to the c3d2014.
first i set the projection and then it asks me insertion point.
1)why the map do not come in at the correct location and c3d needs me to specify the incertion point?
2)then it asks the rotation. i thought that all maps are pointing at north. but if i set it at 90 degrees pointing straight to the north a get a litle rotation that becomes very noticeable as i move far from the incertion point.
if the 90degrees is wrong, how can i find the correct rotation to give the c3d?
3) ok. that map is incerted. can i pan , move it ?rotate it ? how ?
AutoCAD Civil 3D :: Inserting A Block Deletes Points With Point Style With Same Block
Oct 16, 2013We're using C3D 2013 SP2. The survey company we use uses point styles to show the blocks. Say they shoot a catchbasin. Instead of inserting the block, the point shows up as the block.
I did a field check & needed to insert a missed CB. When I inserted the block, the other points that were CBs disappeared. I had to insert the block, copy it the clipboard, undo the insertion & then paste the block in. It did this on other drawings & other blocks.
AutoCAD Civil 3D :: Inserting Goggle Earth Surface To Drawing
May 10, 2012I am trying to insert a goggle earth surface into my drawing. It hits 50% and then I get a fatal error. Had tried several times.
View 3 Replies View RelatedAutoCAD Civil 3D :: Drawing Points Using GPS
Sep 10, 2013How can I draw points in Civil 3d using GPS coordinates?
Is it any way to input the coordinates manually if i have only a few key points, and then superimpose my topography or other objects? or should I insert a data file to get the points first? How can I upload the data file from my GPS tool, and how to figure out in which format to insert it?
I would like to draw with using the GPS coordinates itself, NOT the northing and easting( X,Y,) is it possible?
AutoCAD Civil 3D :: Points Will Not Display In Drawing?
Oct 9, 2012I have a drawing where points that I create will not display.
I have created points in this drawing before.Previously created points display fine.Points created in another drawing and imported into this drawing display fine.All layers have been turned on and thawed, to make sure it's not a layer issue."All points" point group is the top point group.When I create a point manually everything seems to work fine, info is echoed to the command line, etc., but then nothing happens. Obviously it's a setting somewhere, but it is driving me up the wall trying to figure out what setting. I'm sure I will slap my forehead when told what it is.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
AutoCAD Civil 3D :: Points Disappearing From Drawing
Feb 29, 2012Using Civil 3D 2011, I have a topo drawing that's about 2 miles long. The points have styles to them to show the actual survey item such as manhole, trees, signs, etc. I have also created a point group called "no display" that I have added certain points to so they don't show up in the topo. While adding additional points to the "no display" point group, I have noticed that ALL the points but 3 have vanished from the drawing.We just installed the SP2.
View 9 Replies View RelatedAutoCAD Civil 3D :: Points In Drawing Coverts To Mm
Feb 26, 2013I have imported a fieldbook Civil 3D and the co-ordinates all look in the point file. But when I insert them in to the drawing they are converted to mm (decimal shift 3 to the right). I can not seem to change this.
I opened a new drawing made sure the drawing units were meters etc etc, and still the drawing come in and are moved to mm positions. The point file still shows everything is correct in meters and I even click on the point in the drawing and list it and it lists correct in meters. But the co-ordinates are in mm inside the drawing. Dimensions between them is in mm also.
AutoCAD Civil 3D :: Update Survey Points In Drawing
Jun 27, 2012Here is my procedure.
1. Import survey point via ascii file into a new drawing call it Field-dwg.
2, Create a survey data base
3. Import all points in the the data base under import event.
4. open existing drawing, work-dwg, import points as needed from the Survey Data Base.
Problem : Survey points needs be renumber.
I goto field-dwg, and fix the points (renumber).
open survey data base for edit, and import Event, field-dwg/points/update : nothing happen
also try Import Event, field-dwg, survey points, update : nothing happen
so I re-import the points, all is good.
Then I goto work-dwg, and try to update the point, nothing happen.
AutoCAD Civil 3D :: Points And Groups Are Gone After Drawing Recovery
Jun 14, 2013I'm using Civl3D 2013 and I have a drawing that crashed and a recover dwg was created.
I ran the recovery and now the points and groups are gone. Is there a way to get them back?
I can go back to an older drawing. But, i'm trying to avoid losing a few hours of cleanup.
Is this just one of the bugs that is in Civil3D?
Civil3D 2013
Dell Optiplex 9010
Intel I-7 3770 CPU @ 3.4 Ghz
16 gb RAM, 64 bit
AutoCAD Civil 3D :: Drawing Polylines From Points Not Working?
Jul 1, 2013I have points in a 2012 C3D drawing and I am looking to draw 3d polylines from point to point. Ultimately I am wanting to generate breaklines for a surface from a topo. I was able to do this a few months ago and now no matter what I try nothing seems to work. When use the 3P command the Z Vertex is 0. All of the points in the drawing have elevations. I tried drawing a feature line however, the beginning elevation is saying 0. Its as if these lines do not recognize my points as having elevations.
View 6 Replies View RelatedAutoCAD Civil 3D :: Copy Cogo Points From One Drawing To Another
Mar 11, 2011I would like to copy cogo points from one drawing to another, keeping both their layer and user defined properties.
I can:
1. Do a copy and then paste to orginal co-ords. This keeps the layers but loses the UDP's.
2. Export the points to a csv and import into new drawing. This keeps the UDP's but loses layers
3. Export to XML. This loses both Layers and UPD's
I don't have a desc key file setup for the codes on these pts so this is not an option.
AutoCAD Civil 3D :: Displaying Points In Drawing As Manually Create Them?
Feb 20, 2013I was wondering if there is a setting somewhere that can be turned on to display the manual points I am creating as I create them instead of having to go back and update the point group before they display in the drawing?
View 1 Replies View RelatedAutoCAD Civil 3D :: Contours And Points Disappear When Saving Drawing
Jun 6, 2012I just installed AutoCAD 2010 Civil 3D on a 32 bit Windows 7 machine. When I open a dwg sent from a surveyor I can see and manipulate all the linework, contours, points, and SRF breaklines in the drawing. When I proceed to save the file to my computer and reopen it, the contours and points disappear; however all linework and surface breaklines remain. The two files that I have been working with were saved originally in 2004 and 2007 format. I have tried saving to their respective versions but that has not worked.
The only way that I have been able to retain these objects is by first exploding them and making them into a block and later inserting them into the other drawing. If I try to make them into a block without exploding them they also disappear.
Is there a way to retain all drawing objects directly from saving?
AutoCAD Civil 3D :: Drawing Lines To Cogo Points Hangs Up
Feb 23, 2012When I start to draw my polylines to cogo points I have inserted in my drawing it keeps wanting to hang up when I hover over the point. I have set up my point styles to bring in our points with all the attribute information so I am thinking it keeps trying to read all that info as soon as my mouse hits it..
I saw a post about rollovertips but that did not change anything. Any ides what might be causing this? Im using Civil3D 2011.
AutoCAD Civil 3D :: Create Point Group Of Random Points Within Drawing?
Oct 15, 2013Is there a way to create a point group of random points within a drawing and adjust the elevations for the points within that group? Some of the points in the group may have been manually created and some may have been imported by way of "Import Events"..
View 3 Replies View RelatedAutoCAD Civil 3D :: Survey Points With Ground Coordinates Are Scaled Inserted Into Drawing?
Sep 5, 2013Using Civil 3D 2013Coordinates coming out of survey equipment are modified state plane GROUND (scaled up from the origin by the combined factor).Drawing is setup with state plane coordinate system with user defined transformation to establish geodetic reference and the ability to label lat/long or import Bing map data.Survey database is setup with "No Datum, No Projection" (data is already at ground, I don't want ot transformed).Import style is PNEZD and is set to use Northing/Easting not Grid Northing/Grid Easting.After importing points into survey database, coordinates of survey points match the CSV. This is good.After importing points from database to drawing, they are taken as grid coordinates, are scaled again and are off ~5,300 feet northeast.Why would Civil 3D assume the points in the database are grid and scale them when the import style used did not specify grid? Is there a setting or something I can do to tell Civil 3D to leave my coordinates alone?
View 9 Replies View RelatedAutoCAD Civil 3D :: 2013 - Drawing Hangs On Opening (Upgrading COGO Points)
Feb 4, 2013On opening a C3D 2013 drawing, C3D hangs for about 5 minutes. At the bottom of the screen is the message: "Upgrading COGO points". This drawing is only 974KB.
The drawing is being opened from a network . I tried saving it on a local hard drive. That had no effect.
AutoCAD 2013 :: Inserting Cross Section Points?
Sep 26, 2013i have a series of points from a cross section taken using an adcp and i am trying to draw the cross section in autoCAD lt 2014. is there a way i can enter the points as a sort of script so i dont have to manually typoe in the distance and height between each point as i have about 200 points in each cross section.
View 6 Replies View RelatedAutoCAD Inventor :: Inserting Points From Excel Spreadsheet?
Sep 13, 2013Is there a way of inserting points from an excel spreadsheet that come into the part file already fixed, instead of manually selecting the points and selecting the fix constraint?
View 2 Replies View RelatedAutoCad :: Inserting Blocks At Points With Different Text For Each Point
May 21, 2013I am wanting to insert a block at a point, with eastings and northings and an individual number.
For example.
Point 1 -459655,451702
Point 2 -459655,451702
Can I use a script for this, or something else using a .scr or .csv file?
AutoCAD Inventor :: Inserting One Drawing Into Another / Linking Contents Of One Drawing To Another
Dec 2, 2013I would like to know if there is a way to insert drawing no.1 into drawing no.2 (not copy sheets!) so that if I change the drawing no.1, the drawing no.2 (the one that contains no.1) also updates.
That is because I would like to have one part of the drawing that is ''standard'' and multiple drawings that contain this part (so that this part is defined in all drawings but is always the same). Because I don't want to have a separate drawing for the ''standard'' part, but only drawings that contain it.
Xara :: Inserting Custom Bullet Points?
Jan 24, 2013I am using xara designer pro x
I have created a small arrow graphic matching the color theme of the website i am working on.
How do I insert the custom arrow graphic so that it appears when I create a bulleted list, instead of the standard bullet point, which appears by default?
AutoCAD Civil 3D :: Export Points To Datacollector And Create Points List
Feb 8, 2013I had to create a boundary map and place points to all corners. How to export these newly created points back into my data collector (Ranger) and also I'm trying to figure out how to print out a points list.
I stumbled on to this thread but I guessing that it's a different CAD year because my modify tab doesn't look like this. URL.....
AutoCAD Civil 3D :: Large Surface - Converting Points To Cogo Points
Mar 5, 2013I have a large surface (over 1.5 million points and 20 000hectares)
I need to get a point file .csv from the TIN to be able to use it in another program.
-so i've extracted the points from my surface, but they are Autocad points.
-next step is to convert them to civil 3d points.
-I can not select them all when converting them or my computer crashes.
-so i select about 25 000 at a time, the converting takes roughly 10 minutes.
and i have over 1.5 million points to do.
how can i speed this up.
will more ram useful?
AutoCAD Civil 3D :: Converting Points To COGO Points Naming?
Oct 9, 2012I have recieved a file with many points and would like to convert them into COGO points in Civil 3D. The problem is; I would like to keep the hole ID's as I convert, I've made a few conversions and lose the hole ID every time (not showing in Name or Description). Is there a seting I am missing to keep these? My aim to to organize the COGO points in different point groups.
View 3 Replies View RelatedAutoCAD Civil 3D :: Designating Points As Control Points
Aug 17, 2012I have a couple points that were part of an import event (data from a previous project) which I want to assign as control points for an incoming traverse, is there any way to assign those as control points? I can't seem to find a way to do that other than perhaps re-importing the specific points as control points and overwriting the existing ones.
View 2 Replies View RelatedAutoCAD Civil 3D :: Moving Points Out Of All Points Group?
Apr 10, 2013I have a project that was started by leaving all the survey data inside the "All Points" group. So, I'm concerned that when I enter my as built survey points, that even if I put them into their own group, that the original surface will still look at them and just rebuild to my asbuilt data, effectively cancel out the purpose of the asbuilt survey. Will this happen?
I want to take the original points and put them into a group of their own, but I don't know if that will affect anything or not? I have several wetlands already designed on that surface with volume calcs already done too.
What should I do?
AutoCAD VB :: Inserting A Block From Another Drawing
Jun 22, 2011I am trying to insert a block from another drawing, the only way I have been to acheive this has been to open the drawing
Set ObjDocument = ThisDrawing.Application.Documents.Open("D:ACADBlocksGENERAL.dwg")
For Each ObjBlock In ObjDocument.Blocks
If InStr(ObjBlock.Name, "LOGO") <> 0 Then
CopyObjects
End If
Next
ObjDocument.Close
I would prefer not to open the drawing to access the block, is this possible in VBA.
AutoCAD LT :: Inserting A Drawing To Xref
May 29, 2012Is there any advantage when inserting someone else drawing into yours to xref it rather than copy and pasting into your drawing?
View 1 Replies View Related