I'm using CS5 on a PC. I should preface this by saying it's been a long time since I used a vector graphics program, and when I did, it was Macromedia Freehand.
I am creating an object using the pen tool, and I'd like to adjust the curves on either side of an anchor point independently of one another. There was a function to do this in Freehand, but I can't seem to find it's Illustrator equivalent.
in C4D i can move the bezier to make the animation softer but in maya i can only move the point i click, try do middle mouse the bezier to move and i cant i know.
View 3 Replies View RelatedAny way of selecting an individual bezier handle and moving it by increments using the arrow buttons on the keyboard, (in a similar way to moving an individual point)? At the moment, I have two handles on different adjacent points selected, and am able to move them incrementally using the direct selection tool and the arrow keys, but I don't know how they originally came to be selected (I discovered that they were accidentally), or how to transfer the selection to another handle. I'm using CS6.
View 7 Replies View RelatedI am single-clicking on the path the way you are supposed to to add a single corner point—and instead bezier handles automatically keep appearing.
I then have to use the conversion tool before I can use the point. How can I add an anchor point to a path without getting the handles?
Can a selection made within a photograph be independently rotated? I did an inversion of a photograph and now need to correct the angle of an object that's embedded in the photo.
View 4 Replies View RelatedI'm trying to nudge the anchor points on an object randomly (to get an informal look). (I know some Effects do this already.)
Maintaining corner points is no problem - you just set the direction handles to the same coordinates as their anchor.
But I can't nudge a smooth point in the way I want to, which is to move the anchor but maintain the direction handles in exactly the same relation to their anchor as they had before. That is to say, they should remain smooth points.
My script calculates the difference between 'before' and 'after' positions of the anchor, and applies that difference to the direction handles… but in practice the smooth points are converted to corners, because the direction handles don't maintain their relation with the anchor.
var docRef = activeDocument;
var objects = activeDocument.selection.length;
var cShift = prompt("Point shift (pt)",5);
// loop through all objects
for(var count=0;count<objects;count++)
[Code] .....
I've got a section marker (the letter designation with arrowheads pointing in the direction of the cut) that I cannot get to behave correctly.
When I set a parameter to one end with a move action, in order to have the arrowhead and attdef for the letter designation move upwards, all is well. When I try to do the same to the other end, the letter desingation attdef will not move.
Neither attdef is set to "Lock Position", so I'm puzzled why one works and the other end does not. I've tried a move action on both ends and a combination of move/stretch, but I can't get it to work.
Autocad Mechincal 2012 on Windows 7 64-bit
I've created a bezier shape by setting pen to shape mode, set no fill, set stroke and stroke color. as descibed by posteer "Conroy" in a different thread.
I succedded in following an existing line (in a psd document) making one wavey line much heavier by using a bezier shape that fit it using the above settings.
Now I want to copy and move that shape over another faint line to make it much more visible in the same way.
In the inlined image the heavy wavy line on viewers right is the bezier shape made as described. I want to copy it and paste it over the other wavy line on the viewers left... you can see how faint it is.... I could think of no better way to make them heavier and more visible.
I'm not finding a handy way to copy paste the heavy shape/line. How can that be done.
Is there a better way to do this from the start... that is, make the faint lines in psd document heavier and more visible.
Is there a way of unlinking the text frames so that you can move the text independently from the others?
View 5 Replies View RelatedHow can I move both handles symmetrically after the initial point is set?
pen tool:
1) drop a point
2) drop another point and drag (both handles move symmetrically in distance from point and angle)
3) finish your shape
4) switch to Direct Selection Tool
5) select one of the new points and move the handles (angle changes but distance from does not)
Here's a quick vid
[URL].........
I run in to this all the time. I'll quickly set top of a curve, make a mistake and then want to go back and symmetrically extended both handles. Right now I have to set the distance on each side independently and it's never perfectly symmetrical again.
handles on the move tool aren't displaying. The bounding box is checked but there's nothing to grab to resize the selection.
View 3 Replies View RelatedI'm work ing illustrator CS6. My bezier curves are displaying jaggedly. My document raster settings are set to 300. Pixel preview is not on, and overprint preview doesn't change it.
This image is a screenshot of how it displays in illustrator. and here is the same file with a gray background as a high quality PDF.
I would like to extend the bezier handle at it's current angle. Till now, I have been using a guide at the angle and following it when plotting the next curve (as above). I know you can use shift to lock it at a 90 degree, 45 degree angle, etc., but I would like tot keep it at its current angle. Is there a keyboard shortcut for this?
View 7 Replies View RelatedI created a closed object that had a Bezier curve as part of it's definition. I wanted to scale it by 110% and then use this second enlarged object to create a sort of a background underneath the first object to create a sort of a shadow effect. But rather than the second object being uniformly larger than the first it intersects the original object in ways that don't make sense to me.
Is there an easier/differnt way to create an effect like this? I can do it but have to manually adjust a lot of points in the new object so that they create a uniformly larger version of the original object but it's a lot of effort for something that works fine for normal polygons with straight lines (e.g. a star with 5 points).
i've attached an image of what I get with this technique of creating two examples of two objects one a 110% scale version of the other. The first star shows the effect I'm trying to get and the second shows the problem (the red border does not surround the black object uniformly around the perimeter)
I am having problems with my arc tool in illustrator, sometimes it decides to make the handles invisible. making it a very slow process to edit the arch once it is drawn,
to locate the handles I have to grab the end anchor point with the direct selection tool and move the anchor point around, which seems to be the only time the handles for that line or shape become visible. once I realease the mouse, the anchor point are no longer visible. I have to try and remeber where the handle was and keep hovering my mouse around this area until the little "handle" text becomes visible.
This has only happened a couple of times, the first time I re-opened illustrator and I no longer had the problem, but today after reboting illustrator the problem persits.
I made a circle and used the direct selection tool (AICS5). I clicked on the bottom point thinking I would pull down and make the shape into a sort of ballon shape, or an upside down teardrop. but I got the shape below. It was very cool, as if I was pulling outward on both handles of the bottom point. But I was unable to repeat it. It reminds me of the time YEARS ago - when by accident, I pulled a milliion copies of a shape and had no idea how I did it. Just last week I found out about the tilde key trick and realized that's what happened!
View 6 Replies View RelatedWhen using the pen tool in illustrator I see the handles as I create the object, but when I go to modify it sometimes some of my anchor points don't have handles to manipulate them. I went to show edges, bounding box, and clicked the little handles box but it still doesn't bring handles to certain points I want to curve or straighten.
View 3 Replies View RelatedIn Illustrator CS6, any way to select multiple handles of, say, bezier curves, and collectively move, extend, rotate or retract them? I have found a few plugins for Mac - are there any for Windows?
View 1 Replies View RelatedAre there any options to specify the "positions" etc. of handles of anchor points in order to be able to shape a little more precise for example for an image that has to be identically left and right shaped?
I'm drawing a Bell (church bell) at the moment and drawing one side first and duplicating and reflecting it works fine to get the perfectly symmetrical shape, but when I want to adjust some handles or shaping, I would like to do this identically left and right without constantly having to adjust one side and duplicate it etc.
I have created some shapes within a circle and have used Pathfinder to divide the shapes up and have then deleted some.
With the remaining shapes, I want to change the location of some of the adjacent shape boundaries.
I can do this by dragging across some anchor points with the direct selection tool and can then select the anchor point (for both shape boundaries) to move both lines/boundaries together.
HOWEVER, if I want to change the angle of the boundaries by selecting the handles, it seems I can only select the top anchor moving one of the boundaries and not the other thereby separating the lines?
How I can select multiple handles (that should be on top of each other)?
Is there such a thing as a corner anchor point with handles? It's quite a common thing in other vector programs (i.e. Inkscape), but I can't change the direction (angle) of the curve leaving/entering a corner anchor point.
View 4 Replies View RelatedUsing CS6. In the artboard window, I select an artboard tool icon next to an artboard. The artboard displays selected, with the usual grab handles at corners and the middle of sides that in Adobe-world always signal that an object can be resized. I am unable, however, to select the grab handles. When I try to do so, "beep."
An Artboard Options panel has also opened. i can resize the artboard by changing the Width and Height, but I have to guess what I want. If I close this panel, the grab handles go away.
Whenever I have an object grouped, and double click to edit it, I can't get the gradient control handles to show up inside of it.
How can I get them to show up and why did they disappear in the first place?
I am using a script to move anchor points on a path that I have. When I move the anchors, the handles remain in the same location and I am getting very poor results. I was wondering if there was a way to move handles WITH the anchor points. Basically keep them relative to the anchors.
Below is how I am moving the anchor. I know that you can use leftDirection and rightDirection to move the handles, but I would like them to move the same way they would if you moved the anchors when selecting them in Illustrator.
Set currentPoint = targetPathItem.PathPoints(13)
currentPoint.Anchor = Array(-1537.21, 2735.96)
I'm missing transform handles and unable to edit objects or text boxes in Illustrator CC. How do I fix this?
View 2 Replies View RelatedI need to copy shapes over from Illustrator to Powerpoint. Now I'd like to maintain my groups so that I can ungroup them later in Powerpoint. Is that possible? Ideally, Illustrator would copy them in a way for me to change handle positions in Powerpoint later on.
View 17 Replies View RelatedI have created city/landscape artwork using photoshop line and box tools. If you go to URL... then click on the link that says (click here to view Gotham City) you will see one of the images I am talking about. Can this image be made to look the same in vector.
View 7 Replies View RelatedWhat happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedMirrored blocks with annotative attributes, I know I can scale each one individually, but there are over one hundred. It would be nice to use the properties box and type in the scale. As soon as I type in the "x" scale, y and z follow! I need to put in negatives in x only.
Why do y and z automatically follow x?!?!?
I made a project in my Adobe Illustrator. Today I tried to open it, next message appeared: "Can't open the illustration. The illustration contains an incomplete or garbled object description. Offending Operator: '%%End Setup.'"
View 3 Replies View RelatedI made a complex gradient showing all spectral colors in Photoshop. Now I would like to have exactly this gradient in my Illustrator's gradient-palette. Is this possible somehow? At least it is not possible to load the Photoshop-.grd-file into Illustrator.
Of course I know that I can insert the Photoshop-gradient as a picture into any Illustrator document and that is exactly what I intended to do and actually do with it right now. But I also want to use it in conjunction with Illustrators diagram tool, which does not allow to fill the space below a graph with a picture, but which allows to fill this space with Illustrators own gradients. Thus it would be great if there was a way to transfer the Photoshop gradient to Illustrator and not having to start from scratch there again.
Meanwhile I have to copy the graph out of the diagram, putting it on a dedicated layer and there make a clipping mask together with the afore inserted Photoshop-pixel-gradient. This is not very elegant, when you must do this several times...
I'm talking about CS 5.5