Can a selection made within a photograph be independently rotated? I did an inversion of a photograph and now need to correct the angle of an object that's embedded in the photo.
View 4 RepliesI'm using CS5 on a PC. I should preface this by saying it's been a long time since I used a vector graphics program, and when I did, it was Macromedia Freehand.
I am creating an object using the pen tool, and I'd like to adjust the curves on either side of an anchor point independently of one another. There was a function to do this in Freehand, but I can't seem to find it's Illustrator equivalent.
I transfer my adjustments from lightroom to photoshop for additional editing. The adjustments show in the new Photoshop file. However, when I make a selection from that file and copy and paste it into a different Ps file, it does not show the adjustments. I even tryed saving the adjusted photoshop file as a jpeg and then opening it up and reselecting what I want.....Copy and paste it.....and the adjustments still don't appear on the different Ps file/photo. How can I keep the adjustments made in lightroom as a selection to copy and paste to a new file?
View 2 Replies View RelatedJust recently I have found that I cannot independently control the Module Picker and Filmstrip panels. They either both show or are both hidden. I have tried shortcuts and rebooting, but nothing works.
View 2 Replies View RelatedI am looking to extract natural noise from a photographs material and create a black and white layer out of it, but I am new to photoshop and unsure how to proceed with this.
For example, here is a photograph of a hard plastic gun.
I have seen on forums where users will find a good reference image and use it to create a new black and white noise picture utilizing the reference.
For instance the hard plastic noise from the gun, might look like this once extracted and done correctly.
how to produce something such as this?
I am looking for a way to have the ok and apply button gray out until there is a valid selection made in the UI. How can we control if those 2 buttons are active or not?
View 2 Replies View RelatedI have a proposed surface that has been made by selection polyline with a z elevation as contours. Is it possible to have civil 3d easily change the weeding and supplementing factors to a tighter value after it has already been made?
View 1 Replies View RelatedHow do I put my name on a photograph in Lightroom 2.4
View 2 Replies View RelatedIs it possible to save the original photograph as well as the edited one? I would like both but I don't know how to save them both...in LIghtroom, it just seems to edit the picture and then the original is gone....
View 2 Replies View RelatedI have created city/landscape artwork using photoshop line and box tools. If you go to URL... then click on the link that says (click here to view Gotham City) you will see one of the images I am talking about. Can this image be made to look the same in vector.
View 7 Replies View RelatedWhen cropping a portrait format to landscape format (same aspect ratio) AND rotate the crop slightly, the crop resets after clicking away from the image and back. It does not happen if the crop is not rotated.
View 2 Replies View RelatedI have found that if I straighten a photo in Lightroom and then export it, it will not print correctly. The photo will print with the edges of the photo not straight with the borders of the paper. The angle the photo is printed askew is the same angle that I used to straighten the photo.
This is only apparent on prints with borders, but I assume it is happening on borderless prints as well.
This is probably very easy, but I cant figure it out. Whenever I try to type text on the spine of my lightroom book, Lightroom puts it horizontally. I like to rotate the text on the spine of my book by 90 degrees so that it reads from top to bottom, like on any normal book. How do I do that?
By the way, when I start a new book, the spine text appears correctly by default (rotated by 90 degrees). In my existing book, the text cursor appears only for horizontal flow however, despite using the same design template. Is this a bug or did I accidently change the orientation of the text?
Mirrored blocks with annotative attributes, I know I can scale each one individually, but there are over one hundred. It would be nice to use the properties box and type in the scale. As soon as I type in the "x" scale, y and z follow! I need to put in negatives in x only.
Why do y and z automatically follow x?!?!?
Working on raw files, when I right-click the raw file in the filmstrip to 'edit in CS5', sometimes a box appears asking me if I want to edit with the changes made in LR4, other times I dont get the box and my file goes directly to CS5 but without the changes. Why don't I get the option to edit with changes everytime I want to edit in photoshop? Also, sometimes it seems even when it does import, some things like split toning changes are not included.
View 2 Replies View RelatedI am working on a MacBook Pro with both Lightroom 3 and Lightroom 4 installed. I wanted to test my assumption DNG is a DNG and that changes made to a DNG in LR4 would be visible in LR3, so I made changes to a DNG in Lightroom 4, clicked Update DNG Preview and Metadata and then exported that file as a DNG. I imported that DNG into a different Lightroom 3 catalog and the changes were not visible, even after choosing Read Metadata from File. Those same DNG changes were not visible in Bridge either. The changes are visible in the Finder, but not in Preview. how I can make Lightroom 3 recognize the DNG changes made in LR4?
View 1 Replies View RelatedSometimes, the edits made in LR 3 are not applied when I print. They also do not show correctly if I choose them as the desktop background accuratly (afterexporting it as a jpg file).The photo is colorful but my desktop is not!I've exported a number of files and then printed them through windows. Some print fine and some don't.
View 3 Replies View RelatedI have some issues with Raster Image lately when I wanted a scanned jpeg of 210 x 297 mm (a4 dimension) that I want to fit into a 180x220 mm rectangular box in Autocad. I have used Photoshop CS 3 to change the image size to 180x220.
However when I insert the Raster Image files, some files are automatically set to 180x220 (as expected) and others are scaled down and I have to re-scale them (reset the scale value to 1, change the x-value and the y-value is automatically changed, but on the overall it is 180x220, sometimes x is more than y or sometimes y is more than x, but within 1-3 mm)
I want to know :
1. What is the best principle or techniques of knowing/changing image dimension (mm)
2. How to be able to scale raster image in x-axis and y-axis independently of one another?
3. Remove white background to neutral background?
split screen.cad tutor..jpg
In AC LT 12 can you split the screen and work on one side independently of the other without it also showing up on the opposite side?
I edited photos in Adobe Camera Raw from Bridge, but when I look at the same files in Lightroom, they do not appear to include the edits. I did verify that xmp files were created when I edited the files in ACR. Why is Lightroom not reading the xmp file and showing the edits?
View 4 Replies View Relatedhow to control the surface pattern line weights independently?
View 2 Replies View RelatedI'am trying to create a block that has 3 components that can change
1- crane model or base
2- crane boom has different lengths and needs to rotate at pivot point
3- crane jib has different length and offsets from the crane boom
You can do this in one block or do you need to have 3 separate blocks and just piece together?
where I mainly want a conclusive answer: How do I manage Lightroom photos when using 2 computers, keeping all edits made on either one of them, using the same photos for editing. I won't use DNG. Details: I mainly use my older MacBook Pro, but would like to be able to use my PC as it's way better (Specs: i5 2500K, 16GB RAM, SSD, USB3, nVidia GTX 560 TI etc.). I have 2 external HDs that I could use, one for Backup and one for the actual Photos/Edits. I'll probably need to use it as my internal HDs are quite full, and I can't just delete stuff or move it to an (Developer programs, Lossless music, etc.).
Based on this, how do I back up the whole thing e.g. Photos folder (all photos and edits, and preferably presets too)?
I have lost all changes that I made in the develop module. Most of these photos where stacked with the raw copy on top of the jpeg. Then I had picked the ones I liked and make changes to them in the develop module. Then I and changed them to DNG. This was over two weeks ago and I think I was trying to put them in to a collection. Now all I see is the originals as they appeared on the day they where imported.
View 3 Replies View RelatedI purchased Photoshop Elements 11 and Lightroom 4 to use together.However, I used both together in trial versions and did not have this problem.
When I start in Lightroom with an image, then take it to Photoshop to do some work with liquify, save it, return to Lightroom... Lightroom is not acknowledging the new changes made in Photoshop. When I ran the trial versions, they did. How do I get that feature to work again, is there a setting I'm missing?
I've just inherited a 500GB HDD from my Dad and I'd love to be able to work all his photos through LR, although there's no way I'm sitting there and importing each and every directory!
As Google Picasa can be told to monitor a directory (eg My Pictures) and each time a new directory or directories are added, on startup it scans for and locates these new dirs and imports the pictures.
Can LR3 be set up to do this please as it would save me hours if I could just leave it overnight to import all of his pics straight into LR.
I installed an ICM profile from Red River paper in attempt to improve printing from LR by allowing LR to manage colors. Probably should not have done this because I am using Canon s9000 printer and Canon paper but I could not find Canon profiles anywhere on internet (for this printer). In any case, end result is horrific but I can't "reset" or uninstall.
Do I need to reinstall LR and photoshop to fix this? More likely this is now somewhere in Windows but I have already tried to delete everywhere I could find.
I am trying to get a NEF files made on a Nikon D800E to Import to Lightroom 4.4 with Camera raw 7.4. I get an error that states the following files were not imported because they could not be read.
I can import them to Photoshop CS6 and use them in photoshop but cannot find any way to get them into Lightroom. For a while my photos were partially importing and some NEF files werent on the first few tries (but subsequently did). I have updated LR, updated Camera RAW, updated the MAC operating system, and have a newer version of PS (CS6). I have tried from the camera directly and through a card reader with multiple cards but nothing works.
How do I make changes made in develop permanent without opening in PS and saving as a copy? Any way to do that directly?
View 7 Replies View RelatedHow do you get back to your original image after you have made adjustments, closed Lightroom, made more adjustments, closed Lightroom etc?
View 4 Replies View RelatedI've got a section marker (the letter designation with arrowheads pointing in the direction of the cut) that I cannot get to behave correctly.
When I set a parameter to one end with a move action, in order to have the arrowhead and attdef for the letter designation move upwards, all is well. When I try to do the same to the other end, the letter desingation attdef will not move.
Neither attdef is set to "Lock Position", so I'm puzzled why one works and the other end does not. I've tried a move action on both ends and a combination of move/stretch, but I can't get it to work.
Autocad Mechincal 2012 on Windows 7 64-bit