Lightroom :: Can LR3 Be Made To Auto-import (as Google Picasa Does)?
Feb 5, 2013
I've just inherited a 500GB HDD from my Dad and I'd love to be able to work all his photos through LR, although there's no way I'm sitting there and importing each and every directory!
As Google Picasa can be told to monitor a directory (eg My Pictures) and each time a new directory or directories are added, on startup it scans for and locates these new dirs and imports the pictures.
Can LR3 be set up to do this please as it would save me hours if I could just leave it overnight to import all of his pics straight into LR.
Working on raw files, when I right-click the raw file in the filmstrip to 'edit in CS5', sometimes a box appears asking me if I want to edit with the changes made in LR4, other times I dont get the box and my file goes directly to CS5 but without the changes. Why don't I get the option to edit with changes everytime I want to edit in photoshop? Also, sometimes it seems even when it does import, some things like split toning changes are not included.
I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot? Maybe there is some flag I've got set incorrectly.
I use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.
I am trying to get a NEF files made on a Nikon D800E to Import to Lightroom 4.4 with Camera raw 7.4. I get an error that states the following files were not imported because they could not be read.
I can import them to Photoshop CS6 and use them in photoshop but cannot find any way to get them into Lightroom. For a while my photos were partially importing and some NEF files werent on the first few tries (but subsequently did). I have updated LR, updated Camera RAW, updated the MAC operating system, and have a newer version of PS (CS6). I have tried from the camera directly and through a card reader with multiple cards but nothing works.
This seems to have been a problem with previous lightrooms and thought it may have been fixed in LR4 but I can't seem to find the option?
What I have a gripe with is why when I am exporting my editied raws into what ever jpeg format I want (highres low res etc) I put these in a folder with in the orgional raws parent folder and call it "02 - High_Res" for example. To then get this to show in the lightroom folder structure you then have to 'sync' the folder. Is there a way to have this done automatically? Is there a way I can just get it to appear with out syncing?
my workflow is to copy all photos from my camera to a folder that is configured for auto import.Lightroom takes these pics and import them to the library.But it does not exclude duplicate photos. If I copy the same photos to the auto import folder again, LR imports all photos again.
Why can't I configure to exclude duplicates as it works with the manual import function?
I uncheck "Show import dialog when a memory card is detected" under Edit - preferences - Import. However, it rechecks itself when I close lightroom down. Then whenever I put in a storage device -- a memory card, external hard drive, flash drive, etc -- Lightroom starts up and wants to import from that device.
Since I upgraded to Lightroom 4.1 from 3 the Import Dialog screen will not auto open when I insert a memory Cart to my Imac. I have the correct box ticked in the preferences.
Just got lightroom 3 for Christmas. I cannot figure it out and it's a headache so far. How am I supposed to set up the auto import to the My Pictures folder when I am supposed to chose an empty folder for Lightroom to watch? I must be misunderstanding something because I imagine that everyone who buys Lightroom already has photos in their My Pictures folder.
I'm seeing a problem in just some of my Lightroom 4 (version 4.3, latest updates as of today) catalogs where auto import just stops working. There are no error messages and Lightroom continues to work, but files in the watched folder just don't get imported. I've optimized the catalog, restarted Lightroom, double checked that auto import is on, restarted my mac (mac book pro running 10.7.5), imported all the photos into a new catalog... still no joy. Also worth noting is that the other import options are greyed out if auto import is on when I start Lightroom for these broken catalogs... but if I turn off auto import, and restart Lightroom, the import photos and videos is enabled and I can import the files from the watch folder manually.
I'm using LR 4.3 on Windows 7, 64-bit. It seems to work pretty well in Library and Develop and such, so I don't think there's a performance issue...
When I do a synchronize on a folder (may be 500 files or as few as 20), new files don't show up to be imported. I can look at the folder and SEE the file. It's there. But, it's NOT in the library grid. Synchronize does NOT see the file. If I do an import (separate from Synchronize), the file usually shows up. The file I can't see in the library shows up in the list with a checkmark, so it KNOWS it's not been imported. At that point, I can go ahead and tell LR to add them and it's fine.
ALSO, when I add a keyword to a new file, it doesn't show up when I open the files for that keyword. For example, I take a .dng file edit it, then finish in Photoshop. Saving the file in Photoshop gets it back to LR. I can see it in the files in Develop. I can see it in the Library grid. But it ISN'T in the keyword set. Even if I ADD the keyword AGAIN, it STILL doesn't show up in the files for that keyword. If I shut down Lightroom and restart it, THEN the file shows up in the keyword set. Is there some "auto-update" setting I've messed up?
I'm trying to import images shot on a Canon 650d using two different lenses, the (according to EXIF displayed by LR) "EF-S18-55mm f/3.5-5.6 IS II" (kit) lens and an "EF-S55-250mm f/4-5.6 IS II". Both lenses and the camera should be newly supported with this RC.
When I go to develop module and tick "activate lens corrections" (translating, I'm using the German version) nothing happens. No corrections are applied. I need to additionally change "Manufacturer" from "none" to "Canon", then the right lens is automatically found and the settings are applied.
However, if I save this as an import-standard (press Alt+"set standard"), just this lens is remembered: All imported images get corrected using the last selected lens profile. So if I manually correct an image taken on the 18-55mm lens and save this as default, at the next import all images, including those taken on the 55-250mm lens, get corrected using the 18-55mm profile (at least, that's what LR is showing me.)
It was my understanding that the import preset should be specific not only to the camera, but also to the lens the respective image was shot with.
I shot using an eye-fi card. The card autmatically generates a xmp file with geodata in it. LR auto imports these images and adds lens correction and a copy right tag.
What I can't do is automatically is get LR to read the xmp file and include this in the catalogue. I am having to right click images and select read metadata from file.
I have no import presets created (verified by the import screen saying "none" when importing), yet LR adds one (the same one) keyword to all photos imported. I have 4.1, but this has been happening in previous versions. How to stop this?? It is very time consuming to always have to remove this keyword.
I still use Picasa and LR3 (new to LR3, havent made the full switch as I'm still trying to get a grip on the LR3 learning curve)
What I did was change the folder names in Picasa (and found out I cannot undo folder name changes). I can locate the files in LR3 by keyword, but dont know how to reassosiate the files to their new folder.
Whats the the best way for LR3 to find these files again? I dont want to have to delete and reload the images, but will if its easier
I just came back from a long trip out west and almost all (a very few do open) .nef images in Lightroom 5 64bit give me the "unsupported or damaged" message.
I imported the files using Picasa and can view them just fine on there and can see the EXIF data.A lot of searching online led me to try converting the files to .DNG using the DNG converter 8.1 but I get the same "unsupported or damaged" message.
I have recently purchased Lightroom 4. I have edited my photos and saved them as JPEG. I exported them to my computer and wanted to select some for my Picasa web album. I have never resized previously and uploaded full size as I thought they are my back up if I lost everything here.
Anyway when I tried to upload to Picasa it said the image was too large. Some were around 3-4MB which i thought was ok?
I have PSCS3 Extended and have downloaded and installed the Google 3D Warehouse plugin. I can access the plugin which takes me to the Google 3D website and I can navigate to and download 3D models. However, when the model is actually brought into Photoshop, it looks very strange. The model is only visible in fixed shape area that appears to be the shape of the initial 3d model. But when I rotate and move the model, it simply slides the view of the image inside the fixed shape area. Very strange. I've tried this with about 8 different downloaded KMZ (Google Earth 4) models and they all do this same strange behavior. Additionally, I downloaded Google's free SketchUp program. The models load and appear fine in that program. I've exported from that program, but the files still have the same problem when loaded up into Photoshop.
I am trying to import a surface and Image from Google Earth. Basically my steps are as follows:
start GE and C3D find area that I need on GE and zoom in under C3D, insert GE Image and Surface (then it goes straight into select point, and rotation)
Like most discussions i've read.., the import slows down at 49%, and then it chugs for hours if I let it. So i have to cut the cord and re-start both programs.
I saw in a discussion that there are settings that we can change the rows and columns to something like 70x70.
however.... I cannot find where to update this. I typed importgesurface, and clicked on the ribbon as well..., then tried to right click, but it does not take me to the settings. I also figured that I might have to run C3d as admin, but no luck either.
find these settings so I can change them to import a surface and image that is about 15acres?
Running: Sony Vaio intel core i7 8GB Ram 64bit Windows 7 Pro
I just upgraded my entire department to 2013 from 2008. We can no longer import aerial images from Google Earth, publish KMLs or export generic Microstation design files (we have to choose from V7 & V8.)
I can't beleive this "upgrade" actually downgraded our functionality as a department. We can no longer provide sevices to those requiring these file formats and will be forced to discontinue the use of CAD for many of our projects.
