Lightroom :: Unable To Enable Auto Import?

Mar 18, 2014

I'm using LR 5.3 and the "enable auto import" checkbox is greyed out.

View 6 Replies


ADVERTISEMENT

Lightroom :: Enable Profile Corrections Auto Setting Doesn't Find X100s Profile In 4.4

Mar 27, 2014

In Development module in LR4.4, viewing a Fuji X100s raw file (converted on import to DNG) I tick the box for "Enable Profile Corrections" under "Lens Corrections," and select "Auto" from the "Setup" menu. I would have thought that LR would pick up the X100s profile, but no, nothing happens. If I choose "Fujifilm" from the "Make" dropdown, I can find the X100 (not X100s) profile manually. The profile's probably pretty similar, but still, I'm wondering why my install of 4.4 doesn't have the X100s profile in place?
 
While I'm at it, I'll ask this too -- I recently bought the new Nikkor 35mm 1.8G ED (the new full frame 35mm Nikon lens, not the trusty 35mm 1.8DX) and there's no profile for that lens in my LR4.4 either.
 
Finally, I note that when I choose "Check for Updates" from the "Help" menu in LR, I'm told there are no updates available.

View 3 Replies View Related

Lightroom :: Why Doesn't Auto Import Actually Import Images Into Catalog

May 19, 2012

I'm using LR4 with a Canon camera setup (Wind 7 Ultimate). I've got the auto import setting all configured with an incoming folder and destination. The app recognizes when an image is put in incoming folder and in fact it moves it to the destination folder. What is really annoying is that it leaves me at the import settings dialog and then I have to make all these choices as I would if I were manually importing.
 
Shouldn't the images be places in the desination folder and some view of that image be displayed in LR? It could be the folder view or ideally I want to see the last image imported at 1:1 size so I can review it and see if I want to take another shot?  Maybe there is some flag I've got set incorrectly.

View 1 Replies View Related

Lightroom :: Previous Import Count - Auto Import

Dec 21, 2011

I use Auto Import to import my RAW files. Each time LR imports my files the Previous Import count number increases. Is there a way to reset this count so it shows a true reflection of the photos from my previous import session?
 
Correct me if I'm wrong but if you manually import files the Previous Import count number resets itself automatically. I've Googled this problem & this question has been asked before - all users were utilising Auto Import.

View 1 Replies View Related

Lightroom :: How To Get Custom Default Settings To Enable Lens Profile Corrections Automatically On Import

Jan 20, 2012

I have created default settings by serial number for my Canon Mark III 1ds which include enabled lens profile corrections.  I then created a user preset with these default corrections.  Next I imported a folder of RAW images shot with this same Canon camera with the user profile checked as part of the import.  When I switch to the Develop module and check the Lens Corrections panel, I see that although it is checked for each file, the actual make, model and profile are not populated. 
 
Is this a bug or am I overlooking something on import?  I understand that in LR 4, you can apply specific lens and camera calibration profiles to camera serial numbers (noise reduction etc too).
 
MacPro 2.8 Ghz Quad-Core Intel Xeon with 16 gigs of ram running OSX 10.7.2.

View 3 Replies View Related

3ds Max :: How To Enable Auto Key By Default

Nov 16, 2011

How can we enable auto key by default, as its being auto selected when we restart max software again.

View 1 Replies View Related

Revit :: Annotations - Enable Auto Stacking

Aug 19, 2011

While annotation in Revit Architecture how to enable autostack dimensions for fractional dimensions such as 1/2".

Find the attached file as done in Autocad ..my question is how does one achieve the same in Revit Arch???

View 3 Replies View Related

Lightroom :: How To Have V4 Auto Import After Export

Oct 26, 2012

This seems to have been a problem with previous lightrooms and thought it may have been fixed in LR4 but I can't seem to find the option?
 
What I have a gripe with is why when I am exporting my editied raws into what ever jpeg format I want (highres low res etc) I put these in a folder with in the orgional raws parent folder and call it "02 - High_Res" for example. To then get this to show in the lightroom folder structure you then have to 'sync' the folder. Is there a way to have this done automatically? Is there a way I can just get it to appear with out syncing?

View 4 Replies View Related

Lightroom :: Auto Import Duplicates?

Feb 21, 2013

my workflow is to copy all photos from my camera to a folder that is configured for auto import.Lightroom takes these pics and import them to the library.But it does not exclude duplicate photos. If I copy the same photos to the auto import folder again, LR imports all photos again.

Why can't I configure to exclude duplicates as it works with the manual import function?

View 1 Replies View Related

Lightroom :: How To Disable Auto Import

Feb 5, 2010

I would like to disable auto import.
 
I uncheck "Show import dialog when a memory card is detected" under Edit - preferences - Import.  However, it rechecks itself when I close lightroom down.  Then whenever I put in a storage device -- a memory card, external hard drive, flash drive, etc -- Lightroom starts up and wants to import from that device.
 
How do I prevent this?

View 21 Replies View Related

Lightroom :: Import Dialog Will Not Auto Open

Jul 2, 2012

Since I upgraded to Lightroom 4.1 from 3 the Import Dialog screen will not auto open when I insert a memory Cart to my Imac. I have the correct box ticked in the preferences.

View 4 Replies View Related

Lightroom :: How To Set Up Auto Import To Pictures Folder

Jan 10, 2012

Just got lightroom 3 for Christmas. I cannot figure it out and it's a headache so far.  How am I supposed to set up the auto import to the My Pictures folder when I am supposed to chose an empty folder for Lightroom to watch? I must be misunderstanding something because I imagine that everyone who buys Lightroom already has photos in their My Pictures folder.

View 1 Replies View Related

Lightroom :: Auto Import Stops Importing

Dec 28, 2012

I'm seeing a problem in just some of my Lightroom 4 (version 4.3, latest updates as of today) catalogs where auto import just stops working. There are no error messages and Lightroom continues to work, but files in the watched folder just don't get imported. I've optimized the catalog, restarted Lightroom, double checked that auto import is on, restarted my mac (mac book pro running 10.7.5), imported all the photos into a new catalog... still no joy. Also worth noting is that the other import options are greyed out if auto import is on when I start Lightroom for these broken catalogs... but if I turn off auto import, and restart Lightroom, the import photos and videos is enabled and I can import the files from the watch folder manually.

View 2 Replies View Related

Lightroom :: Can LR3 Be Made To Auto-import (as Google Picasa Does)?

Feb 5, 2013

I've just inherited a 500GB HDD from my Dad and I'd love to be able to work all his photos through LR, although there's no way I'm sitting there and importing each and every directory!
 
As Google Picasa can be told to monitor a directory (eg My Pictures) and each time a new directory or directories are added, on startup it scans for and locates these new dirs and imports the pictures.
 
Can LR3 be set up to do this please as it would save me hours if I could just leave it overnight to import all of his pics straight into LR.

View 2 Replies View Related

Lightroom :: Extremely Slow Import And No Auto-update?

Feb 6, 2013

I'm using LR 4.3 on Windows 7, 64-bit.  It seems to work pretty well in Library and Develop and such, so I don't think there's a performance issue...
 
When I do a synchronize on a folder (may be 500 files or as few as 20), new files don't show up to be imported.  I can look at the folder and SEE the file.  It's there.  But, it's NOT in the library grid.  Synchronize does NOT see the file.  If I do an import (separate from Synchronize), the file usually shows up.  The file I can't see in the library shows up in the list with a checkmark, so it KNOWS it's not been imported.  At that point, I can go ahead and tell LR to add them and it's fine.
 
ALSO, when I add a keyword to a new file, it doesn't show up when I open the files for that keyword.  For example, I take a .dng file edit it, then finish in Photoshop.  Saving the file in Photoshop gets it back to LR.  I can see it in the files in Develop.  I can see it in the Library grid.  But it ISN'T in the keyword set.  Even if I ADD the keyword AGAIN, it STILL doesn't show up in the files for that keyword.  If I shut down Lightroom and restart it, THEN the file shows up in the keyword set.  Is there some "auto-update" setting I've messed up? 

View 7 Replies View Related

Lightroom :: 4.2 RC - Auto-apply Lens Profiles On Import?

Sep 6, 2012

I'm trying to import images shot on a Canon 650d using two different lenses, the (according to EXIF displayed by LR) "EF-S18-55mm f/3.5-5.6 IS II" (kit) lens and an "EF-S55-250mm f/4-5.6 IS II". Both lenses and the camera should be newly supported with this RC.
 
When I go to develop module and tick "activate lens corrections" (translating, I'm using the German version) nothing happens. No corrections are applied. I need to additionally change "Manufacturer" from "none" to "Canon", then the right lens is automatically found and the settings are applied.
 
However, if I save this as an import-standard (press Alt+"set standard"), just this lens is remembered: All imported images get corrected using the last selected lens profile. So if I manually correct an image taken on the 18-55mm lens and save this as default, at the next import all images, including those taken on the 55-250mm lens, get corrected using the 18-55mm profile (at least, that's what LR is showing me.)
 
It was my understanding that the import preset should be specific not only to the camera, but also to the lens the respective image was shot with.

View 4 Replies View Related

Lightroom :: Auto Import Metadata - Get LR To Read XMP File?

Sep 15, 2013

I shot using an eye-fi card. The card autmatically generates a xmp file with geodata in it. LR auto imports these images and adds lens correction and a copy right tag.
 
What I can't do is automatically is get LR to read the xmp file and include this in the catalogue. I am having to right click images and select read metadata from file.
 
There must be a better work flow then this.

View 5 Replies View Related

Lightroom :: Stop Auto Adding Of Keyword At Import?

Jun 7, 2012

I have no import presets created (verified by the import screen saying "none" when importing), yet LR adds one (the same one) keyword to all photos imported.  I have 4.1, but this has been happening in previous versions.  How to stop this?? It is very time consuming to always have to remove this keyword.

View 3 Replies View Related

Lightroom :: Stop The Auto Import Of Aperture Library?

Jun 16, 2012

I don't want to import my aperture library. Everytime I start LR the Aperturu library starts to come in. How do I turn off?

View 1 Replies View Related

Lightroom :: How To Map Pixels And Auto Clone From Adjacent Area On Import

Aug 18, 2013

I have a couple of bad pixels on my camera, is it possible to map them and auto clone from adjacent area on import?

View 4 Replies View Related

Lightroom :: Import Raw Files / Add Presets Then Auto Export DNGs Or JPGs?

Jul 23, 2013

Can I auto export like auto import. I want to auto import raw files, add presets, then auto export DNGs or JPGs.

View 4 Replies View Related

Lightroom :: How To Prevent LR5 Import Dialog Auto-starting / When A Memory Card Is Detected

Feb 21, 2014

How do I prevent Lightroom to auto-start after introducing an USB-stick or otherwise in my computer? I want to start when I need it.

View 2 Replies View Related

Photoshop :: Unable To Enable OpenCL In CS6?

Mar 25, 2013

I have a Radeon HD 5670 card (640sp version) and I'm unable to activate the "OpenCL" option in Advanced Graphics Processor settings.My GPU driver version is Catalyst 13.3 beta 3 for windows 7. The problem occurs in Catalyst 13.2, too.  GPU-z report: [URL}...OpenCL works with Neat Image Plugin: [URL]...
 
Photoshop's System Info tool's report:
 
Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08/08:21:00:00) x32
Operating System: Windows 7 32-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:15, Stepping:13 with MMX, SSE Integer, SSE FP, SSE2, SSE3

[code]...

View 5 Replies View Related

Lightroom :: Unable To Import PSD / CR2 Into 4.1

Jul 13, 2012

needed larger HD and did a clean install of windows 7 after doing a search of my original HD for all PSD/CR2 images> then doing the "drag drop" technique of copying/backing-up those images to another external and an internal HD.
 
Then did the instillation of that larger "C" HD and clean install of windows 7>copied those images into one newly created folder on that drive>installed CS6 and LR 4.1 and...LR can't/will not recognize and import more than 500 out of 14,000 PSD/CS2 images.
 
I am able to access those images via windows explorer and open them into CS6 without difficulity.  I have done a couple un/reinstall of LR.Every one of those images is located within one folder and no images anywhere else on the "C" drive. I still have the original back-ups in two places.  I have watched the videos on importing images.

View 5 Replies View Related

Lightroom :: Unable To Import In LR4?

Oct 10, 2012

LR4 locks up when trying to import, or use file, edit, library, etc tabs. 

View 1 Replies View Related

Lightroom :: Unable To Import Anything

Jan 15, 2012

I've got a fully updated version of Lightroom 3.6 and I haven't been able to import a single file in several months although I had no problems with Lightroom 3 (installed May 2011).   I'm on a PC with Windows 7 (ver6.1). 
 
When I try to import it says "the following files were not imported because they could not be read".
 
I'm importing jpg files and it fails if I try to import from: my camera (worked previously), my memory card reader, my hard drive, an external drive.
 
I've tried importing copies of photos Lightroom previously imported and recognized and new photos its never seen before.  I've tried importing photos taken on my Canon Powershot SX100IS, my Nikon L120, and my cameraphone.  It fails on everything with "the following files were not imported because they could not be read" error.  

View 5 Replies View Related

Lightroom :: Unable To Import Photos Into 4.4?

Jun 7, 2013

I am unable to import photos into Lightoom 4.4 on Macbook Pro running on Mountain Lion. I tired importing photos directly from the sdcard, both via the inbuild reader & and external USB reader. Import fails in both cases. I then tired copying the files to desktop, import fails with move option too. But when i use the add option, the import works fine.

View 5 Replies View Related

Lightroom :: Unable To Import Presets

Mar 1, 2012

When I try to import presets in LR3/Develop, the template files are not visible to select even though they are definitely listed where I stored them on my computer.  I recently upgraded my computer and am now using Window 7 instead of Windows XP.  Neither new downloads nor old downloads are visible.  Why doesn't LR recognize them?  Does 64-bit vs 32-bit make a difference? 

View 2 Replies View Related

Lightroom :: Unable To Import Pictures To LR3

Jan 30, 2012

I have just installed LR3 on my new computer and is unable to upload my photographs.  I have change permissions as suggested in other forums, it recognises my Nikon D3 and shows the pictures but when I try to import I get the following message  "the following files were not imported because they could not be read"  I have LR3 on my laptop and it works fine. 

View 6 Replies View Related

Lightroom :: Unable To Import JPG Versions

Nov 7, 2013

I recently purchased Lightroom 5 and have updated to 5.2.  I did my first import from a file folder to the catologue.  I noticed that all my .awr files imported and any edited .jpg imported, but the original .jpg would not import if there was a corresponding .awr file.  I'm not sure how to fix this.  I would like all my photos imported. 

View 2 Replies View Related

Lightroom :: Unable To Import Raw Files From 5D Mk3 Into LR3

Dec 27, 2013

I am having trouble importing .CR2 files into lightroom 3.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved