In Lightroom 4, I need to figure out how large a photo can print and still keep good resolution. I .e., I want to print a photo at 20x30" and I need to know ahead of time that it will look good printed at that size.
View 9 RepliesI'm designing a real-estate flier for a friend and am trying to add some text to a white background. There is going to be plenty of text and photos on the sheet so I'm trying to use a font size of 8. When I printed this out the text was extremely blurry. I tried several different fonts with the same result.
What would be the best setttings to do something like this? I think I'm supposed to use CMYK Mode but am not sure about the resolution or the pixel dimensions.
I have a photo that I copied from an Power Point Presentation which looked great on Power Point but when I have it in PS I noticed that the image size is just 2.507x1.028 with a res. of 576. Pixel Dimensions are 2.45M
I would like to print out a larger version of this photo but I'm not having much luck with it. It gets blurry when I try to enlarge it.
It was on Power Point as PNG graphic and I saved it to the desktop as a Gif andthen dragged it into PS.
Don't know much about Power Point maybe there is a better way to transfer pics from it.
Here is a snapshot of the image size window:
Is it true that if pixel dimension is very large in size than the resolution number under document size doesn't matter ?
if my photo will print clearely choosing the belwo document size.
i want to check all the photo resolution within a file, before sending to print, is there a way to check them all in one time?
View 4 Replies View RelatedIf I scan a 5x7 photo and print it to a large billboard(30ft x 65ft) how much dpi am going to use?
View 2 Replies View Relatedso i`ve scanned some pics, and simply used ps to crop them and when i`ve printed them off they`re quite pixilated, especially when they did`t seem that bad on the screen on ps. on the print set up the quality levels are all high photo quality level, so that should`nt be a problem. I`m just wondering what can be done to reduce the pixilation. is there an effect that`s good for this??
View 2 Replies View Relatedhow can I make a picture at low resolution, to look on the screen very good, like at high resolution (something else that "anti-aliased).
View 3 Replies View Relatednoticed that in CS6 is u crop to 72dpi there is way to much sharpening applied to the image as compared to CS5. This is a real pain in the ass especially for a web developer.
View 9 Replies View RelatedI have CS4 and am consistently having problems creating multipage pdf files using Bridge; though they are created using 300 dpi files in Photoshop CS4 the resulting multipage pdfs from Bridge are not print quality. I never had a problem with this before Bridge was required to create pdf presentations.
The files used to create the presentation in Bridge are either psd or Photoshop pdf at 300 dpi. I am completely self-taught in Photoshop and my skill level is moderate at best,
from In2012, I manged some how to put a .bmp picture in the color style.But as you see, it's not good, no good focus neither the piccture continue from the start to the ene, you see lines cutting the picture.
And when I use a color style that already exist in inventor, it looks so good.The picture that I used is attached ( named 1) I will use a better pic.I want my drawings looks almost like my actuale product.
The print resolution is no longer displayed making it difficult to decide if I need to modify the resolution prior to printing. Second, Lightroom 5 no longer generates a print preview. I select this option in my printer interface but sends the image directly to the printer without generating the preview. I did not have these issues with Lightroom 4 or earlier versions.
View 1 Replies View RelatedI'm new to Lightroom and was attempting to prepare a file to send to a print lab. I want to produce a large format single image with dimensions of 52" x 36". I've prepared this in the 'print' module but when I press 'print to file...' it warns me that the file is 760mb and I may run out of memory! Is this file to large to sent to a printer, how can I reduce the size of the file without reducing the quality of the print? or is this just a standard file size for a large format printed image?
View 2 Replies View RelatedIf I want to print on large paper sizes, e.g. A3 or A2, what is common wisdom:
- Set the paper size in LR and let LR blow the photo up;
- Edit a copy in PS and use the PS Size command to blow it up.
I mean if the magnifier routine in LR is the same as in PS one would expect the same result, right?
How to ADD (almost) white Border around photo(s) to print in print module (not for creating a JPEG) WITHOUT TRIMMING the photo?
I dont understand why I'm so stupid not to be able to acheeve this simple task with Lightroom WITHOUT TRIMMING the image (altering it's proportion and cutting away photo-content)
(on light-gray backgrownd for instance, to use as cutting indications. I know how to use cutting-indications for images i print without a border)
(i do not whant to use workarounds, the kind of preparing "identity plates", a new one each for infinite variations of proportions to use as fullblown-up backgrounds..)
How do I get my photos printed? I select a photo but I get the maessage that no photo was selected.
View 2 Replies View RelatedFor example, I want to print one 17x22-inch image onto 2, 8.5x11-inch sheets.
View 2 Replies View RelatedI realize the nature of my question maybe asking the impossible, but I have a low res image I downloaded from the internet, placed in an InDesign page, blew it up and printed it out. I was going for the distressed look that it has, it looks ok when I print it out considering it's low res and I blew it up fairly large. However, it's a little too pixelated to look professional when printed. Are they any tricks or things I can do to make it look higher res for print. I've attached the image as well as a screenshot of the InDesign file so you can see it in context.
View 4 Replies View RelatedIn the Print Module, with the Print Resolution box left unchecked, how does LR choose the ppi that will be sent to the printer? I realize that it is using an algorithm to choose a ppi.
View 12 Replies View RelatedIs it possible to change the resolution when exporting a photo to Facebook using either the regular plugin or Jeffrey Friedl's plugin? I can't seem to do it; I only have control over the image dimensions, not the resolution and the dimensions, as you can see in the screen shots below:
I have control over both when I export to my hard drive (or a flash drive, etc.), as you can see below:
I can't find the option to control the resolution when I try to export to Facebook. Before I got Lightroom 4, I would create whole new low-resolution files of images I wanted to post online using Photoshop. The image size settings I would use are a longest edge of 10 inches at 72ppi, and I would like to continue doing this. If I can only set the longest side to 720 pixels (I can't even seem to set the longest edge to an inches value - I can only choose a pixels value) and not change the resolution from 300ppi to 72ppi, then my photos' longest edge will only be less than 3 inches long (right?). Thus, I really want to be able to upload low-resolution photos to Facebook via Lightroom with the ability to change both the resolution and the image dimensions. How to do it without having to export to my hard drive first?
I changed the resolution on a photo to 500 in the export screen. What do I reset it back to for the highest resolution. I changed to 500 to email a photo.
View 4 Replies View RelatedI am trying to print a 16" x 20" photo through Lightroom's print module. I am using an Epson 3880 printer and 17" x 22" paper. I have done this in Lightroom 4 with no problems. Now I am getting a print that is 16-3/8" x 20-1/2". I have the cell size set at 16" x 20" and borderless printing is turned off. I also checked zoomed to fill. This has also happened on a couple of 12" x 18" photos.
View 2 Replies View RelatedCurrently looking at buying either Lightroom 4 or Elements 11 at home - can I change image resolution and merge/join photos along with the standard photo editing - would be using this app for my travel pics, family photos and photobooks?
View 2 Replies View Relatedeven though graphics look absolute sharp on the screen, the print out rather pixelated which I dont understand why. When I print the same graphics work out using different software such as Microsoft Word believe it or not, it comes out extremely sharp but the same graphics in Photoshop come out pixelated. The initial graphic work was designed in Flash and has been exported in many file formats.
I know some of you would say "Why dont you just print everything out from Microsoft Word", well the answer is, this design work is for a new Mouse Mat where the printing company has specified Photoshop EPS file format.
I work in AutoCAD 2010.
(AMD 64 X2 4200+, 2Gb RAM, C: 7Gb free, D: 17 Gb free)
I can not print imported images (JPG or TIFF) large size 80 - 260 Mb.
Print all but the raster! I tried to print on a plotter in JPG, TIFF, in whole or in parts, useless.
If I export the whole project in JPG 2000x3000 pix, all right, but I have 9000x10000 pixels - that size is not exported.
I can't take a good photo, but the Mother-in-Law is quite an avid photographer. She went on holiday recently to Tsitsikamma, & Kruger Park, both here in SA. I asked if she would take some photo's for me I could use as textures and/or backdrops. Last night I got my photo's
This one I just clipped from an image of a really old tree. Played around with it, and I mean played as I'm certainly no expert. This is the result Very Necronomicon looking. It just shows, sometimes you get more than you expected on a photo. I will certainly be playing with this some more.
So I couldn't think of a better place to put this. I have something that I'm thinking of having professionally printed. What are the steps I should take to make sure I produce a high quality image? File format, Dpi and so forth. Make a list of steps to creating a high quality image file that will look good printed from a print shop.
View 5 Replies View RelatedWorking with PS7 & on XP.
If I want to have a poster be 30x36" (300 dpi) is it safe to create the file in PS one third it's size (10x12") at 600dpi?
Or do you create it at one third its size at 300dpi & then enlarge it by 300%?
to add large test to large resolution files, i.e. 4000 pixel files from Canon 5d for example?
When I have small files, 500 or 1000 pixels for web, no problem, but if I try on a bigger, it seems even the largest fonts, look miniscule.
I would like to print some text on a photo. Can I do that in LR?
View 2 Replies View Relatedin the Book module, I want to print the photo's date under each photo. I only found a way to print caption.
View 2 Replies View Related