I need to prepare a very simple poster (one color for back ground and one for the font, no further editing at all) but it has to be around 50x50inch size which is big. I have never worked with such a large images before hence my question.
When I click 'new' and then set print size to 50x50 and 150ppi resolution the file size is around 250mb. Does it really have to be this big? It seems like my laptop cant handle files this big.
When I try to set a large page size (13X19) in the print screen from GIMP, it will not go beyond 8 X 11. What do I have to do to set up to print larger. When I do page set up, it always reverts to defaults.
I am working with a wiring diagram which is 8.5x11 normally. I'd like to enlarge the image to print on 4 pages each 8.5x11 that I can tape together so I end up with a large image that I should be able to read more easily.
I can't for the life of me figure out why a 9 page PDF containing only outlined text, is ending up at 4.5mb. It's pretty intense lines and text, etc. But still. It seems too large.
I have 1 large photo (33cm x 200cm) i like to print on A3+ paper. Not cropped or reseized, but on about 4 papers i can glue toether after printing and so get 1 large file.
So in all i'm looking for a way to print from PS cs5 so that , part by part, the image is split on the 4 sheets i like to use.
I can of course manually 'cut' the photo into 4 pieces myself, but i really hoped PS CS5 could do this job automaic for me.
I'm new to Lightroom and was attempting to prepare a file to send to a print lab. I want to produce a large format single image with dimensions of 52" x 36". I've prepared this in the 'print' module but when I press 'print to file...' it warns me that the file is 760mb and I may run out of memory! Is this file to large to sent to a printer, how can I reduce the size of the file without reducing the quality of the print? or is this just a standard file size for a large format printed image?
Ive got this blank DWG with a file size of 4MB... ive ERASE > ALL on all layouts, then PURGED a few times, i cant see any layer filters. The STATUS command says it has 241007 objects. but i cant find or get rid of them.
Take a look at this DWG and let me know how i can clear it out and reduce the file size?
[URL]........
Uploaded to DropBox... the DWG was too big to attach to the post.
I have a file that doesn't have a lot of stuff in it, but the file size seems to be quite large in proportion. Is there a way that I can use DBList, and export the data to a spreadsheet? It would be a lot easier to search through than the F2 way.
I have successfully printed a dwg to a pdf but instead of its file size being 450k it is 1.4 m. This makes sending pdfs via email too cumbersome. It seems that even though the outcome is B&W somewhere along the line "it" thinks it is Color. I noticed that in Page Setup I no longer have the option of "DWG to PDF.pc3".
Is my illustrator running slow? I have an i7 3770K, 16gb ram, gtx 660i 2g, h100i, ax1200i and maximus formula v. I'm running dual 24" 1920x1080 monitors. File size is 800x600 pixals with 5 layers and 100+ paths in each layer. Is the program running slow because the file is too big or is there a problem with illustrator?
Some of the thumbnails on elements 12 organizer have an error message of "File Size too Large" and are not displaying. All of the photos are jpeg file and are aound 8mb.
After inserting quite a lot of linked images (without embedding), the file size becomes much larger, up too nearly 400MB.
I saved without pfd compatible function already, but the file size is sill very large. I did not face the same problem working with CS5 before, is that a bug for CS6?
Sometimes an assembly file can become really very big.
Try to delete all components, all custom ViewReps, Positional Representations and Level of Details and save the file. If the file empty is till very big, then this post might be interesting.
What is the best way to reduce the file size of an Inventor IAM 3D Model when exporting to a DWG format? My client only needs a couple of 2D views in order to take measurements in AutoCAD.
I have used Gimp a bit, and before that PS quite a bit. I have never had to use the size constraints for sizing a file to fit a large format printer. I will be getting one any day so I would like to be prepared as much as possible. When I was at another shop, the owner used one of the cropping functions to set the finish print size and then she could move the box around to locate the best print area and remainder to be cropped. She was using PS. I would assume I could do it also in Gimp, but have not found a way to do it yet. What am I missing. Even if the printer software will do it on the printer, I would like to be able to show my customer on a PC monitor what they might expect.
I'm working in Civil 3D 2012 and when I print to a .PDF with rotated views, the .PDF file is very large compared to file with non-rotated views. how to control the file size?
Spent 9 hrs creating a slideshow that I saved. Closed PSE 11 and reopened and can no longer find the slideshow. When I select Find, Media type, Project, nothing appears, but there is a gray box in my grid that says "File size too large". Is this my slideshow and if so how can I recover it?
I am trying to print an image to an exact size but can't seem to get it right. I am using the resize tool but the image always appears cropped at the edges. The image is a circle. Is there a way to determine the exact size before printing?
The 8x12 pixel size is 768x1152 and the 8x6 pixel size is 768x576. As to the need of being 11.5 I knew that, but I had this plan to work larger in order to downsize it and not lose any detail of clarity. If I'm understanding some of the other things I read you get a 100 pix per inch, but paint.nets is 96 per inch?
But let me throw a couple more things at you as well. I've made some scrapbook pages in what I had hoped were 10x13's to be printed out for framing...however, when taken to the Walmart printer it cuts off half of one side like the pic is too big..this is even when going for a 11x14 and larger size. I resized them, still cuts them off. Yet I make a 6x4 canvas and try to use it for my desktop background and it's too big for it in the "fill screen" mode, not mention the distortion.
Is there just a simple, cut and dried formula for image, canvas size that will come out the print dimensions I need? I'm sure I'm missing something basic, but my mind only works in basic mode!!
I am trying to reduce the file size on a large number of jpeg photo's for unsertion into Windows Movie Maker. How do I compress the slides in a batch job? Can I do it in Photoshop Elements?
I am looking to create a collage made from 100 photos (all taken high res) to be printed large, approx 120cm x 50cm. To be able to print this size I need to keep the high resolution and hence looking for a large file output.
If I open a jpg file and draw a single line just a few pixels long, when I save the file it doubles in size (as in disk space, not pixels). How can I prevent that from happening.
I did a Photo shoot for some dancers who need some images for print. How do i save these images so that they are A, print ready pdf's. and B, Email able.
The goal is to get these images onto the page of a paper/magazine. Not full size but i guess they will be a put in a box.
