Photoshop :: How To Print Large File On Multiple Paper
Jun 24, 2012
I have 1 large photo (33cm x 200cm) i like to print on A3+ paper. Not cropped or reseized, but on about 4 papers i can glue toether after printing and so get 1 large file.
So in all i'm looking for a way to print from PS cs5 so that , part by part, the image is split on the 4 sheets i like to use.
I can of course manually 'cut' the photo into 4 pieces myself, but i really hoped PS CS5 could do this job automaic for me.
Is their a way i simply did not find yet?
View 7 Replies
ADVERTISEMENT
Aug 19, 2012
I have a Mac OS X Lion 10.7.4 and Photoshop CS5.1 and have just hooked up my Epson RX580. On the window platform in another software program the multiple pages and/or poster options appear in the print window. But not in Photoshop on my mac. I have made sure to download the newest drivers etc.
View 7 Replies
View Related
Jun 13, 2010
I have some large images that I would like to print at full size, which will involve tiling across multiple sheets of paper. I can't seem to find a way to setup tiling at the Print dialog or through Gutenprint.
View 3 Replies
View Related
Jul 24, 2013
For example, I want to print one 17x22-inch image onto 2, 8.5x11-inch sheets.
View 2 Replies
View Related
Jun 7, 2013
I need to prepare a very simple poster (one color for back ground and one for the font, no further editing at all) but it has to be around 50x50inch size which is big. I have never worked with such a large images before hence my question.
When I click 'new' and then set print size to 50x50 and 150ppi resolution the file size is around 250mb. Does it really have to be this big? It seems like my laptop cant handle files this big.
Is there some way around it? Vectors? Inscape?
My laptop is Hp Pavilion g6 Core i3
Attached Thumbnails
View 2 Replies
View Related
Mar 12, 2013
I'm new to Lightroom and was attempting to prepare a file to send to a print lab. I want to produce a large format single image with dimensions of 52" x 36". I've prepared this in the 'print' module but when I press 'print to file...' it warns me that the file is 760mb and I may run out of memory! Is this file to large to sent to a printer, how can I reduce the size of the file without reducing the quality of the print? or is this just a standard file size for a large format printed image?
View 2 Replies
View Related
Oct 16, 2012
I am useing a Canon Pro 9000 MKII and when I try to print 11x14 paper, it will not alow custom paper size. The Canon printer driver does have custom size but it does not show up in printer settings.
View 1 Replies
View Related
Jul 13, 2012
Shp file not printing in paper space, but WILL print in model space? This is Civil 3D 2013. If the issue was resolved by this method, please click on "Accept As Solution".
View 1 Replies
View Related
Aug 3, 2013
When I print 11 x 17 paper on Epson R2880 in LR the image begins printing before the leading edge of the paper reaches the printerhead (not prininting borderless.) Only happens in LR and not PS. I am using the LR paper standards for borders.
View 1 Replies
View Related
Jan 8, 2013
I have Windows 8 and am new to Elements 11. How do I get print to completely fill a 4 x 6 print paper?
View 5 Replies
View Related
Mar 10, 2013
I am looking to create a collage made from 100 photos (all taken high res) to be printed large, approx 120cm x 50cm. To be able to print this size I need to keep the high resolution and hence looking for a large file output.
View 1 Replies
View Related
Sep 7, 2012
I work in AutoCAD 2010.
(AMD 64 X2 4200+, 2Gb RAM, C: 7Gb free, D: 17 Gb free)
I can not print imported images (JPG or TIFF) large size 80 - 260 Mb.
Print all but the raster! I tried to print on a plotter in JPG, TIFF, in whole or in parts, useless.
If I export the whole project in JPG 2000x3000 pix, all right, but I have 9000x10000 pixels - that size is not exported.
View 1 Replies
View Related
Sep 23, 2011
Sometimes when I print multiple sheets to a Combined PDF file Revit goes through the process and combines all of the sheets in one PDF file but then it continues to re- print the PDF file as many times as the number of sheets.
View 9 Replies
View Related
Apr 17, 2013
Using a Mac, what is the best way to print multiple images on a 4 x 6 print in Photoshop Elements 11?
View 5 Replies
View Related
Jul 12, 2006
I have an image that should be 9.5 x 12 inches. I need to print it out that way to make a template for something. How do I do this?
View 5 Replies
View Related
Aug 14, 2013
I've been a long term Photoshop (elements) user, but rarely use it. I primarily use Aperture. I have a shot that I've printed successfully in 20 X 20 on aluminum and would like my next print to be bigger, 30 X 30 would be ideal.
I have a JPG Aperture export that measures 2318 X 2318 pixels. I was talking to a person at an art show this weekend, discussing my goal for this photo and he mentioned a feature of Photoshop that can take this image and basically adds more pixels. It's a 3 second motion shot in low light, so I'm not too worried about losing sharpness.
Here is a 1024 X 1024 export of the photo.
View 4 Replies
View Related
Jun 22, 2013
If I want to print on large paper sizes, e.g. A3 or A2, what is common wisdom:
- Set the paper size in LR and let LR blow the photo up;
- Edit a copy in PS and use the PS Size command to blow it up.
I mean if the magnifier routine in LR is the same as in PS one would expect the same result, right?
View 1 Replies
View Related
Nov 17, 2013
Recently I noticed that when I print on a certain paper (Epson Premium Ultra Luster Photo Paper) that a blue tint is being printed on the paper along with the image. This seems to be occurring whether I use a standard .icc file or a customized .icc file for this paper. Am using Adobe CS5 to manage colors, rendering intent relative colorometric. Am using an iMac with 10.6.8. and Epson 3880 printer. The only thing I can think that changed is I upgraded from 10.5 to 10.6 a few months back. If you look along the sides of the image below you can see what I'm getting.
Just for the heck of it, I just printed the same image with Photoshop Elements 9, and I am not getting this blue cast.
View 3 Replies
View Related
May 4, 2008
I am working on a project that is a large print of about 30 inches wide and 20 inches in height.
(I just wrote a big post but for some reason when I tried posting it the forum logged me off and it didnt post so I wont get too detailed here.)
Basically I need to print the image for example using 9 piece of normal paper and stick it together with transperant tape to make a large image.
Is there a way to do this without the need to cut the borders on each page, I really would like to print borderless pages and not cut them.
View 4 Replies
View Related
Aug 27, 2013
I am a student currently working on my year 12 project. I am wondering how can you print white on clear label paper?
View 2 Replies
View Related
Nov 8, 2012
I have an HP 6500A Plus, and it should be capable of printing edge to edge, even on custom sizes. After contacting both Apple (I am running MacOS 10.8 Mountain Lion) and HP for answers, I burned a lot of time with Adobe either just plain not getting an answer because I didn't buy it or being given the run-around. I need to know what Photoshop is doing to block the available capabilities from working.
View 6 Replies
View Related
Aug 31, 2013
Some paper companies have released a new paper size-9x13.
I find this excellant for fireworks and certain architecture prints.
Problem is that in CS6 I cannot adjust Set Up dialog to get entire paper printed correctly. The printer(both Canon's 9000mkii/9500mkii) always have a border. Red River(the paper I use) sez use 8x12 but there is no 8x12 setting.
the paper size in the CS6 Print menu (PS Manages Color) so the copy is inked 100%?
View 3 Replies
View Related
Dec 10, 2013
I am trying to print 2 5x7 pics on one sheet of 8.5x11 paper. On the screen everything looks fine. I rotate the image, then uncenter the image to the top edge. I print the picture once, put the sheet back in turned 180 degrees, then print again. In previous versions this worked fine. Now, in version 11, it does not want to work. I have tried changing the size settings to custom 5x7. It still does not work. The image comes out 5" horizontally including a 1/4" border. Vertically, it comes out 5", no border. I am wasting a lot of paper trying to figure out where the problem is to no avail.
View 1 Replies
View Related
Jun 19, 2013
I work at an architectural company and I need to resize a lot of images in our database. We’re talking about roughly 40.000 images, but that is not the hurdle.Previously I have made an action that resizes my images in two steps, because I need them in two different qualities When I open the image and runs the action, it does something like this:
Convert mode: Convert to RGBSave: As JPEG, quality 10, and in a certain folderImage size: width 800px, constrain proportionsSave: As JPEG, quality 8, and in another folderClose Now I want to make a change to that action, by resizing the image two times instead of one.I want it to look something like this:
Convert mode: Convert to RGBImage size: width 4000px, constrain proportions (BUT ONLY IF THE IMAGE SIZE IS LARGE ENOUGH, OTHERWISE LEAVE IT AS IT IS)Save: As JPEG, quality 10, and in a certain folderImage size: width 800px, constrain proportionsSave: As JPEG, quality 8, and in another folderClose
How can I do this? Do I need to add a variable or?
View 5 Replies
View Related
Mar 27, 2013
If I scan a 5x7 photo and print it to a large billboard(30ft x 65ft) how much dpi am going to use?
View 2 Replies
View Related
Oct 14, 2012
I have multiple layout pages (58 pages) and would like to print them in a printer at once. How do I do that?
Currently, I open 1 layout at a time then print it 1 by 1, in which its killing me specially if I do have lots of drawings.
Publish does saving in DWF, PDF... But does not print in the printer.
View 3 Replies
View Related
Jun 5, 2013
Where do I find the selection that lets me select 5 x 7 paper size with option to print with or without borders
View 2 Replies
View Related
Apr 27, 2013
Using Elements Ver. 7. I have one photo which I have cropped using a 4x6 aspect ratio. I've done the same thing on dozens of photos but this one only prints on half the page (4x6 photo paper) no matter what orientations I set the printer or the program to.
View 1 Replies
View Related
Apr 7, 2013
I want to print a folded greeting card from the templates offered by Photoshop Elements, but the printing process requires you to essentially print three things: front, left-hand greeting and right-hand image. It doesn't have one template for just the front and back and another for the inside.
View 7 Replies
View Related
Mar 7, 2013
I am working with Illustrator CS6 and I have to prepare a file that will be printed as a 6 foot x 1.5 foot banner. Actually, it will be several banners; the same design but only the name of the organization will change. I have everything on different layers in the .ai file.
I've done the artwork as an .ai file, everything is a vector, there are no rasterized images in it at all.
The problem is, I'm not sure the best way to save the file to send to the printer. So, do I save the .ai file as a pdf, a pdf/x-1a, pdf/x-3 or pdf/x-4? Should I convert the text to outlines? There's a symbol in the artwork that includes text, does that text have to be converted to outlines as well?
Or should I just send them a file any which-a-way and see how the proof comes back?
View 3 Replies
View Related
Sep 27, 2013
I have one layout. On that layout I want to have 2 viewports. I also have ssay block A and block B I want to insert.I would like Viewport1 to display block A and viewport 2 to display block B.
What happens to me is when I created Viewport 1 and inserted block A. I go on to create viewport 2. But viewport 2 displays only block A, which I cannon delete to insert block B.
View 1 Replies
View Related
