Shp file not printing in paper space, but WILL print in model space? This is Civil 3D 2013. If the issue was resolved by this method, please click on "Accept As Solution".
View 1 RepliesI am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View RelatedHow do I set my paper space to print A3 am using autocad 2007 and have spend days trying to figure it out. How to I get a title block/template to fit A3.
View 4 Replies View RelatedWe just installed 2013. I'm in a layout tab, a AutoCAD/C3D keeps kicking me out of model space into paper space.
View 3 Replies View RelatedNormally I plot in paper space and everything works well. when I plot in paper space all the lines ae much, much lighter and almost invisible, whereas if I plot the same drawing in model space the plot comes out perfectly, though not in scale. I must have pushed a wrong button somewhere but wnat button is beyond me.
View 7 Replies View RelatedI have a layout with a border that is alligned very well in the layout view (see attachement 1) but the whole thing somehow moves to the left when I preview the plot (attachement 2). I thought the dashed lines were supposed to indicate my printer's plot area. Is there a way to fix this anomanly? I have tried to play with page setup options, application options, but nothing works.
View 4 Replies View Relatedhow to print two separate A2 drawings side-by-side in A1 paper space on an HP plotter? I'm assuming that this would be handled by a third party print management software or something along these line. I'm looking for any solution to save on paper!
View 1 Replies View Related2 of 3 viewports in paper space do not show up in print preview, nor will they print. The viewports are all on the same layer, defpoint layer. Even if I create 3 new viewports and erase the old ones, still can only print preview one viewport and only one viewport will print.
View 6 Replies View RelatedHave a dwg with two layouts sheets that print to pdf in paper space - one layout works just fine the other NOT.
Both include one view port and a few small details as pdf underlays(@ 150 kb each) in the PAPER space layout.
The problem sheet - ran a very slow plot preview but it did complete a full view of the layout, then when selected to do the plot it never completes the pdf.
I tried a pdf plot of the same area in MODEL space and it previews just fine and plots to a pdf just fine.
I'm using AC 2011LT on a PC Every time I print to PDF or printer a line appears which is not visible on the model or paper space. It is even not visible when I preview the print before printing (again from model or paper). And on different layouts the line moves and sometimes doubles.
I have done all the regular things - all layers on, all unfrozen, all visible, etc, I've purged, regened, made a save as file, gone to another persons computer but still the same problem.
If I import an Arcview shape file into Autocad Map, why can't i plot it out from Paper Space??? I can plot out shape file data in Model Space but not Paper Space. The data is mapped to a layer, and it can be viewed in "Print Preview" but nothing comes out when i plot from paper space.
View 2 Replies View RelatedI've run into a small problem while trying to export a drawing from paper space as a PDF. The drawing is of an electrical panel for a product. The panel is rather large, but the drawing includes some smaller details, such as a vendor logo on a component or a few extra lines on the border of a display screen. We have a large, multi page PDF file that uses A4 paper size that I need to insert this drawing into, so the export must be at this size. When exporting, I have CAD set to use monochrome and ignore the line weights, which solved my initial problem that the parts would show up as solid black splotches.
Now that the back story is over, here's the problem. When I export the pdf, everything looks great except these small details around the components. For some reason, the lines in the components will shift to one side or the other, causing breaks between features. Most of these breaks occur between an arc endpoint and a line endpoint. The export also excludes some smaller bits of geometry.
When printing a paper space viewport in Conceptual Visual Style mode, text objects are visible in the print preview but not in the printout on paper. Why are they not hidden in the preview if they are not going to be printed?
View 2 Replies View Relatedjust wondering if any of you know the command that I can use in order to align my text in papr space. I'm running 2011 and 2013 C3D. I have several callouts that are in a row, and I COULD draw a line straight down and just move them all to it, but that's a very inefficient way of getting this done. At the last company I worked, we had a command in the system simply called LINEUP that would align any text we wanted either horizontally or vertically. If this is a button I can create with code or whatever, I could try to do that too, if necessary. Just might take me a while to do the code, but I know there's a more efficient way of performing this task.
View 6 Replies View RelatedI'm having a problem with labeling points in Civil 3D 2012.The drawing was originally received in Imperial form from another CAD software.I work in meters or millimeters. Millimeters in this drawing.
I've made them very tiny in Model space but they still end up huge in Layout.
We have a few drawings where the line weights between paper space and model space vary on plots.i.e a line on Layer 1 in model space plots heavier/darker than a line on Layer 1 in paper space.
View 8 Replies View RelatedProblem: ECW image shifting within paperspace layout. Problem only with viewports which have been twisted.
Computer:
Windows 7 64bit
32gig ram
Quadro 2000 (on the supported list)
Using Civil3d 2012
Have tried recovering... moving the geometry is not an option. Have also tried toggling "Projection" on and off as suggested in other threads
This seems to have been a long standing issue and its surprising there yet seems to be a fix. Have made the same post in an AutoCAD 2011 as a reply to a board on the same issue.
[URL]........
My question is when you Create Reference Grid, it seems to default the text and grid to black in color (I work with a black background in C3D), so its pretty tough to see. Where do you control the color and text size of this Grid?
View 3 Replies View RelatedI am having a problem where my station labels are the correct size in model space, but when I switch to paper space they stay really small. I think it is a mm/m problem but can't seem to find a solution in the properties of the station label group. If I type a piece of mtext it works fine.
View 4 Replies View RelatedEvery time i switch to Paper Space I get a Fatal Error in Civil 3D 2013. What could be casing the crash? It does it in every drawing so it does not appear to be specific to any one perticular drawing.
Civil 3D 2013
why is it that simple commands in paperspace like editing text/mtext, moving a single line or erasing objects so slow. it seems like it takes way to long to do simple editing. Makes me what to go back to model space sheet set up. I already did the changes to settings that someone posed "NEW Autocad Performance Tips". I notice a small performance enhancement but still very slow compared to paper space. this happened in files with one layout tab or 10.
C3D ver 2012
Win 7, 64bit
I am using Civil3D 2011 and I am working on 1:1 model space scale. When I go to paperspace and open a scaled viewport, the texts and linetype scales change. What can i o to make them look the same as in model space?
View 5 Replies View RelatedI have been having this issue for a few weeks, where my contour lines will not plot in paper space, but the labels do. If I plot from model space everything shows up. All layers have been checked and nothing is frozen or turned off in the viewport.
View 3 Replies View RelatedI've set up an 8.5 x11paper space layout in one file and would now like to transfer it into another drawing file.
What is the best way of doing this?
I want to create a simple scale bar in a paper space layout, that is dynamically linked to the scale of the viewport.
I've searched and come across a few dynamic scale bars on the web and a few forum discussions, but I just can't work out how to create my own from scratch...
Civil3D 2013 (infrastructure suite)
Self-built i7-3930K, 16Gb RAM, P9X79 m/board
SSD(system), HDD(data), GTX680, Win7Pro64
I created a date and time stamp to put on a border in paper space. The stamps were created using Mtext with a field. The stamps do not update and show the created time and date. How to create a stamp that updates?
View 8 Replies View RelatedI have a number of problems with alignment labels showing up in layouts that I don't want to show or want to show up differently,. Is there any way to label an alignment in paper space (layout)? (or any other type of label).
View 3 Replies View RelatedSetting the scale in a view port in paper space? 2010
View 3 Replies View RelatedHow to insert the point table into paper space rather than model space and creating a mview?
Also, is there a way to add the point style symbol to the table?
I am on ACAD 2012
I am using paper space dimensions and have a problem that they keep changing
I have attached a drawing demonstrating my problem. The square is 12' x 12''. Everytime the file is opened DIM SCALE LINEAR is multiplied increasing all dimensions by the multiplier. It does this each time the file is opened.
You can right click remove overrides on the dimension to get it to appear correctly (I don;t have any overides the software is overiding on open.
I'm having trouble with paper space labels. When i zoom in and out to adjust my viewport, the scale looks fine. Then when i go to plot preview all text are enlarged. Then when I cancel I go to paperspace and labels remain large.
View 9 Replies View Related