AutoCad :: Set Paper Space To Print A3
Dec 20, 2011How do I set my paper space to print A3 am using autocad 2007 and have spend days trying to figure it out. How to I get a title block/template to fit A3.
View 4 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: SHP File Will Not Print In Paper Space
Jul 13, 2012Shp file not printing in paper space, but WILL print in model space? This is Civil 3D 2013. If the issue was resolved by this method, please click on "Accept As Solution".
View 1 Replies View RelatedAutoCAD Print / Plot :: Plotting In Paper Space?
Nov 8, 2013Normally I plot in paper space and everything works well. when I plot in paper space all the lines ae much, much lighter and almost invisible, whereas if I plot the same drawing in model space the plot comes out perfectly, though not in scale. I must have pushed a wrong button somewhere but wnat button is beyond me.
View 7 Replies View RelatedAutoCAD 2013 :: Print Margins Different In Paper Space And Preview
Feb 21, 2013I have a layout with a border that is alligned very well in the layout view (see attachement 1) but the whole thing somehow moves to the left when I preview the plot (attachement 2). I thought the dashed lines were supposed to indicate my printer's plot area. Is there a way to fix this anomanly? I have tried to play with page setup options, application options, but nothing works.
View 4 Replies View RelatedAutoCad :: Print Two Separate A2 DWG / PDF Files To A1 Paper Space On A0 Plotter
Oct 17, 2012how to print two separate A2 drawings side-by-side in A1 paper space on an HP plotter? I'm assuming that this would be handled by a third party print management software or something along these line. I'm looking for any solution to save on paper!
View 1 Replies View RelatedAutoCAD Print / Plot :: 2 Of 3 Viewports In Paper Space Do Not Show Up?
Mar 11, 20082 of 3 viewports in paper space do not show up in print preview, nor will they print. The viewports are all on the same layer, defpoint layer. Even if I create 3 new viewports and erase the old ones, still can only print preview one viewport and only one viewport will print.
View 6 Replies View RelatedAutoCAD LT :: PDF Print From Paper Space - Slow Preview Then Will Not Complete The PDF Plot
Sep 20, 2013Have a dwg with two layouts sheets that print to pdf in paper space - one layout works just fine the other NOT.
Both include one view port and a few small details as pdf underlays(@ 150 kb each) in the PAPER space layout.
The problem sheet - ran a very slow plot preview but it did complete a full view of the layout, then when selected to do the plot it never completes the pdf.
I tried a pdf plot of the same area in MODEL space and it previews just fine and plots to a pdf just fine.
AutoCad :: Ghost Lines Print In PDF Which Are Not Visible In Either Model Or Paper Space
May 24, 2013I'm using AC 2011LT on a PC Every time I print to PDF or printer a line appears which is not visible on the model or paper space. It is even not visible when I preview the print before printing (again from model or paper). And on different layouts the line moves and sometimes doubles.
I have done all the regular things - all layers on, all unfrozen, all visible, etc, I've purged, regened, made a save as file, gone to another persons computer but still the same problem.
AutoCAD Print / Plot :: Plotting Imported Shape Files In Paper Space
Sep 29, 2000If I import an Arcview shape file into Autocad Map, why can't i plot it out from Paper Space??? I can plot out shape file data in Model Space but not Paper Space. The data is mapped to a layer, and it can be viewed in "Print Preview" but nothing comes out when i plot from paper space.
View 2 Replies View RelatedAutoCAD Print / Plot :: Export Drawing From Paper Space - Small Details In PDF
Jun 1, 2011I've run into a small problem while trying to export a drawing from paper space as a PDF. The drawing is of an electrical panel for a product. The panel is rather large, but the drawing includes some smaller details, such as a vendor logo on a component or a few extra lines on the border of a display screen. We have a large, multi page PDF file that uses A4 paper size that I need to insert this drawing into, so the export must be at this size. When exporting, I have CAD set to use monochrome and ignore the line weights, which solved my initial problem that the parts would show up as solid black splotches.
Now that the back story is over, here's the problem. When I export the pdf, everything looks great except these small details around the components. For some reason, the lines in the components will shift to one side or the other, causing breaks between features. Most of these breaks occur between an arc endpoint and a line endpoint. The export also excludes some smaller bits of geometry.
AutoCAD Print / Plot :: Text Objects Not Printed In Conceptual Paper Space Viewports?
Jul 3, 2012When printing a paper space viewport in Conceptual Visual Style mode, text objects are visible in the print preview but not in the printout on paper. Why are they not hidden in the preview if they are not going to be printed?
View 2 Replies View RelatedAutoCAD 2010 :: Changing Between Model Space To Paper Space Locks Application
Apr 12, 2013In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
AutoCAD 2013 :: Toggle From Paper Space Into Same Zoomed Area Within Model Space
Oct 5, 2013Lisp that would permit Toggling from Paper Space into the same zoomed area within Model Space and vice versa.
View 3 Replies View RelatedAutoCAD Civil 3D :: Dynamic Blocks Showing In Model Space But NOT In Paper Space
Mar 22, 2012I am a landscape architect trying to xref in civil backgrounds. I have noticed twice now from two different civil firms that some of the civil symbols (dynamic blocks) are having visibility issues in paper space. No the viewport layers are not turned off or frozen. No the views weren't placed using the sheet set manager. Yes the blocks are created on layer zero and yes the associated layer is not off or frozen. I don't believe these blocks are annotative blocks. They appear, as expected, perfectly clear in model space. I just toggel over to paper space and "poof" they've disappeared.
View 9 Replies View RelatedAutoCAD 2013 :: Transfer Model Space Drawing Into Paper Space?
Feb 15, 2013how do I transfer model space drawing into paper space ?
View 2 Replies View RelatedAutoCAD Dynamic Blocks :: X Y Coordinates From Model Space On Paper Space?
Nov 5, 2013I'm trying to create a block that reads the x and y coordinates of a point from the end of a leader. Which is fine and easy enough if I use the block in the same space.. ie model space or paper space (layout tab).
However I wan't to be able to capture the coordinate from the model space, through the viewport, and pass it onto the block in Paper Space. Is this possible?
Or is it a case of having to use a more LISP based approach?
AutoCAD LT :: Model Space Hatch Hiding Paper Space Multileader
Dec 10, 2012I'm running ACAD LT 2013.
I have a solid hatch that is in model space (actually in an xref in model space). When I use multileaders (in paper space) and point into the hatched area, that part of the multileader becomes hidden. As if it was a layering or object arrangement issue.
AutoCAD Architecture :: Copy Objects From Model Space To Paper Space?
May 19, 2011is there a way to COPY objects from model space to paper space? CHSPACE only "cuts" geometry. I need the same geometry stacked in both model space and paper space.
View 1 Replies View RelatedAutoCAD 2013 :: Switch Object From Model Space To Paper Space
Oct 12, 2012I feel like I have a vague memory of once learning how to click on an object in a viewport and being able to click a button or use a command to switch that object to paper space (so that it appears the same size). I'm trying to avoid having to go through the steps to scale down the object once I get it in paper space).
View 2 Replies View RelatedAutoCAD 2013 :: Paper Space Viewports - Wipeouts In Model Space
Jul 13, 2012I have several viewports rotated in paper space. When i set them to let say 1:100 scale go to paper space and then click into viewport it comes back to zoom extends of model space and i have to set it all up again and rotate it.
Second problem is that I've created wipeout in model space when i go to layout (paper space) ti looks just how i want it.
When I go to preview or plot it doesn't recognise any wipeouts?
AutoCAD Map 3D :: How To Get From Paper Space To Model Space While Converting Scale Properly
Feb 8, 2012I need to have users plot to DWF from paper space so they can retain their customized layers colors etc, on that specific paper space tab, as well as the view via viewport that they like most.
I then am mixing this with FDO data generated out of Model space. Unfortunately, when using the EXPORTLAYOUT command, the data is coped into Model space but seems to retain it's paper space coordinates. I had hoped this function would behave like CHSPACE and copy everything from paper to model space in the same scale.
Is there a way for me to achieve this?
AutoCad :: Text Doesn't View In Same Model Space / Paper Space
Aug 24, 2012ACAD 2010 text doesn't view the same in MSpace and PSpace! Model space is the acad default text: txt Paper Space it appears as it should as Romans. The drawings print as txt and not as it should Romans! When I change the text in model space to Romans, save the drawing, enter PSpace and the return to MSpace, it seems to 'reset' back to text!
This is specific to my workstation BTW, when I open the dwg file on a colleagues PC it opens Romans in both Model and Paper space.
AutoCad :: Referencing Title Block From Model Space Into New Tab Of Paper Space
Jul 11, 2011I just started a new job and am struggling to set everything up the way my old company had AutoCad configured. My old company actually had people that were involved in writing the code for AutoCad on the payroll, so hopefully what I'm looking for isn't some intense computer programming issue.
In short, I am trying to be able to create a generic title block in model space, and reference that title block into paper space of a new drawing without having to create a new tab or anything first. A new paper space tab is automatically created upon attaching the new title block. My old company had its own custom menu bar with lots of custom commands, so the work flow would go something like this: "Old company name" in menu bar -> "Insert" -> "Title Blocks" -> "24x36 title block" (or whatever size we wanted to use obv). Once the desired title block size was selected, a new tab would be created in paper space with the title block as an xref, and a copy of the generic title block was saved to the main folder containing drawings of the project, and could be edited with the specific project info from there.
Is there a semi-easy way to do this, or is this a coding issue that a non-programmer such as myself might have some difficulty doing?
AutoCad 2D :: Bring Paper Space Object Through Viewport Into Model Space
Jan 5, 2009What is the command to take a paper space object and send it through the viewport into model space (without copy and paste)?
View 8 Replies View RelatedAutoCad :: Copy Text From Paper Space And Paste Into Model Space
May 2, 2013I am relatively new to A.C. 2010 and have a recurring issue with copy and paste. Currently all I am trying to do is copy text from paper space into model space and it wont let me.
View 5 Replies View RelatedAutoCad :: Locking Out Model Space While Editing Text In Paper Space
Oct 24, 2012I use x-ref's inserted in model space and label in paper space - always.
I would like to see a way of locking out model space while editing text in paper space. Unless you double click right on the text, you often end up in Model Space...I know - big deal right? It can become annoying or a big deal when a deadline is looming - when is one never? Also big fan of locking viewports.
AutoCad :: Objects Are Yellow In Model Space And White On Paper Space?
Apr 4, 2012how it works?, the objects are yellow in model space and white on paper space??
View 6 Replies View RelatedAutoCAD 2013 :: Importing Paper Space Layout And Model Space Objects From Dwt Into A New Drawing
Oct 4, 2013I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies View RelatedAutoCad :: Can't Click Outside Paper Space To Move View Control Toolbar To Model Space
Jun 29, 2013CAD-Newbie working in paper space zoomed in close. I want to return to page extents but am zoomed in so close I can't click outside paper space to move view control toolbar to model space. is there a simple key command to perform this function?
View 9 Replies View RelatedAutoCad :: Changing Of Units In Model Space Does Not Affect Length Of Line In Paper Space
Dec 26, 2012Wile using acad2011...
In model space I set the units form my dwg (cm), draw a line (100units). Next i go to paper space, create a viewport. When the viewport scale is set to 1:1 the ploted line is 100mm in length (not 100cm). Why is this so? How should I correct this? Changing of units in model space does not effect the length of the line in paper space.
AutoCAD 2010 :: Fields In Model Space To Paper Space?
May 2, 2012determine if Fields can be used in model space inside a block and show up in the paper space view as a correct number, (say for a detail number)? I have all of my detail blocks in model space and would like to place fields in the title blocks of the details so that they would show the paper space sheet number that they are being shown on in paper space. I have done some experimenting and cannot seem to get it to work. Or will this just not work?
1.- Details in model space are blocks, and I want to edit the block and insert a field into the detail callout.
2.- I want to have the model space detail read the paper space drawing number, and have the fields change to the proper sheet number.
3.- The result will be the that the model space block fields have changed to the proper detail sheet number shown on the paper space border.