AutoCAD Print / Plot :: Export Drawing From Paper Space - Small Details In PDF
Jun 1, 2011
I've run into a small problem while trying to export a drawing from paper space as a PDF. The drawing is of an electrical panel for a product. The panel is rather large, but the drawing includes some smaller details, such as a vendor logo on a component or a few extra lines on the border of a display screen. We have a large, multi page PDF file that uses A4 paper size that I need to insert this drawing into, so the export must be at this size. When exporting, I have CAD set to use monochrome and ignore the line weights, which solved my initial problem that the parts would show up as solid black splotches.
Now that the back story is over, here's the problem. When I export the pdf, everything looks great except these small details around the components. For some reason, the lines in the components will shift to one side or the other, causing breaks between features. Most of these breaks occur between an arc endpoint and a line endpoint. The export also excludes some smaller bits of geometry.
View 2 Replies
ADVERTISEMENT
Nov 8, 2013
Normally I plot in paper space and everything works well. when I plot in paper space all the lines ae much, much lighter and almost invisible, whereas if I plot the same drawing in model space the plot comes out perfectly, though not in scale. I must have pushed a wrong button somewhere but wnat button is beyond me.
View 7 Replies
View Related
Mar 11, 2008
2 of 3 viewports in paper space do not show up in print preview, nor will they print. The viewports are all on the same layer, defpoint layer. Even if I create 3 new viewports and erase the old ones, still can only print preview one viewport and only one viewport will print.
View 6 Replies
View Related
Sep 20, 2013
Have a dwg with two layouts sheets that print to pdf in paper space - one layout works just fine the other NOT.
Both include one view port and a few small details as pdf underlays(@ 150 kb each) in the PAPER space layout.
The problem sheet - ran a very slow plot preview but it did complete a full view of the layout, then when selected to do the plot it never completes the pdf.
I tried a pdf plot of the same area in MODEL space and it previews just fine and plots to a pdf just fine.
View 7 Replies
View Related
Sep 29, 2000
If I import an Arcview shape file into Autocad Map, why can't i plot it out from Paper Space??? I can plot out shape file data in Model Space but not Paper Space. The data is mapped to a layer, and it can be viewed in "Print Preview" but nothing comes out when i plot from paper space.
View 2 Replies
View Related
Jul 3, 2012
When printing a paper space viewport in Conceptual Visual Style mode, text objects are visible in the print preview but not in the printout on paper. Why are they not hidden in the preview if they are not going to be printed?
View 2 Replies
View Related
Mar 12, 2009
I'm trying to plot a lot of drawing files that are in model space. We use to do this with batch plot. Is there still a way to do this in 2009.
View 7 Replies
View Related
Oct 25, 2013
Why don't my paper space thumbnails seem to be saving as 1024 pixels? Drawings that are saved while model space is active do save as 1024 pixels, so the problem only occurs when the thumbnails are a snapshot of a layout sheet. Changing the "Thumbsize" variable has no effect, and I can see the file size doesn't change either, even though the thumbnail is clearly updating because I can see little geometry changes. But when the thumbnail is of model space, then the "Thumbsize" variable works exactly as I'd expect.
To be specific, I'm referring to the preview pane of Win7's Windows File Explorer. As I increase the size of the preview pane, the thumbnail stays tiny-literally the size of my thumb. This makes the preview pane significantly less useful.
My maxium thumbnail pixel size "Thumbsize" is set to 1024. My "Updatethumbnail" is set to 16 (it was 15 originally but I don't even know what a 15 value does).
The attached drawing is saved as an AutoCAD 2010 file (AC1024):
View 9 Replies
View Related
Aug 3, 2009
I am trying to print a tall, thin window, auto-scaled to fit on 11x17 paper using a Windows PC3 driver. I want the image to be essentially 17" tall. No matter what paper orientation I choose in the printer Properties (Portrait or Landscape), the image is rotated automatically the wrong direction. (The print preview shows the paper rotated as Portrait or Landscape correctly, but the image is always rotated to fit the 11" dimension of the paper). I'm using AutoCAD Electrical 2008.
View 3 Replies
View Related
Jan 20, 2012
I'm using autocad 2000 and I have a problem printing & plotting. The print, plot preview only shows a section of the drawing. What settings do I need to change for the entire drawing to print for the paper size I need.
View 3 Replies
View Related
Jan 17, 2013
I have several objects on various layers in model space and they are exposed through a viewport in a paperspace layout. I also have a corporate CTB plot style.
Here is my problem: If i plot the objects from model space, they all plot with the correct lineweights as defined in our corporate CTB, but when i plot them from the paperspace layout, some but not all objects plot with a heavier lineweight than what is defined in the CTB.
I thought the CTB was supposed to override any settings applied to individual objects, but more importantly, why the different results, on the same objects, depending upon the space from which they're plotted?
View 3 Replies
View Related
Feb 15, 2013
how do I transfer model space drawing into paper space ?
View 2 Replies
View Related
Oct 4, 2013
I'm trying to import a drawing from a dwt file into a drawing as a new layout. This would be perfect if the model space objects associated with this dwt file would import as well.
View 9 Replies
View Related
Apr 30, 2012
I am having trouble scaling my drawing between model space and paper space. I have it drawn in model space at 1:1, and I set the viewport scale in paperspace to 1:15. However, it does not show up as 1:15. I have drawn a 50' line in model space. The viewport is 4" wide in paperspace, so you should be able to see the whole line in the viewport at a 1:15 scale, with some space on each side. However, it does not. I can only see a small fraction of the line.
View 8 Replies
View Related
Apr 5, 2011
How can I do this?
View 4 Replies
View Related
Jun 21, 2011
Paper space was just introduced the last time I used AutoCAD professionally. I didn't become familiar with it and it seemed like an unfathomable concept then; at least from the way it was explained to me.
So I did some drawing for this guy all in paper space...that was what first opened up in AutoCAD. After five hours and getting ready to send the files, I realize that maybe I should a done it in model space. Is it really going to make that much of a difference? If he wanted me to redo it in model space .
View 9 Replies
View Related
Feb 23, 2012
I'm using 2004lt- I have current .dwg in modelspace and set up to plot in PS@ 3/23"-1'-0". I'd like to create a second set of PS tabs to plot portions at 1/4"-1'-0" on the same border when needed.
In its a single viewport in MS and PS the current scale is 1:1 but if i change it to 1/4"-1',etc the plot preview appears wrong
View 1 Replies
View Related
Dec 20, 2011
How do I set my paper space to print A3 am using autocad 2007 and have spend days trying to figure it out. How to I get a title block/template to fit A3.
View 4 Replies
View Related
Dec 24, 2013
I'm having trouble with paper space labels. When i zoom in and out to adjust my viewport, the scale looks fine. Then when i go to plot preview all text are enlarged. Then when I cancel I go to paperspace and labels remain large.
View 9 Replies
View Related
Nov 21, 2011
We do most of our drawing in 2D – quaint I know, but that’s the way the office works. On occasion we’ll do something as a solid model to guide a client understand a complex roof or a clearance problem. We started a model for a project we are working on and ended up using it as building elevations.
The problem is with plotting. If I use our standard office CTB (which is set to print as black), I get color printouts no matter what I try. I have tried using an STB and changing all our layer colors to “7” in an attempt to make it print black, but I'm getting extremely undesirable - seemingly random - line weight results.
The client wants the next project done in 3D as well and I’d like to be able to have the elevations look right.
View 4 Replies
View Related
Apr 15, 2013
Is there a way to apply plot styles and line weights to a dwg file like 'dwf ePlot' does but keeping the results in .dwg format?
View 4 Replies
View Related
Aug 19, 2013
I was wondering if the 8.5 x 11 dimensions change at all when going through an inkjet printer, and if so, how much. I suspect this is not a significant issue with scale accuracy, but wanted to be sure.
View 3 Replies
View Related
Sep 23, 2004
I`m using AutoCAD2004 with HP Designjet 800 Plotter.
The Plotter is connected to network.
I want to add some Custom Paper Sizes, however, when I open the options for the plotter(User-defined Paper sizes&calibration), I can`t add or modify paper sizes. The `Add` button is not available.
I set my computer to `Power Users` but still cant add. How to make the `Add` or `Delete` buttons usable?
View 2 Replies
View Related
Oct 19, 2011
I'm having a problem making paper size filtering 'stick'.
For years I've configured PC3 and their associated PMP files for each of our printers and plotters. As a part of the configuration, I filter out all the paper sizes we don't use. Once the PC3 and PMP files are configured, they're copied to all the local PC's. I've never had a problem with this, until now.
On the PC where the PC3 file is configured, the filtering is correct. On any other PC, various paper sizes are added. For instance, I'll filter out all paper sizes on printer "X" except for 8.5x11 and 11x17. On a similar PC, the paper sizes "16k 197x273mm" and "8k 273x394mm" are added.
If I point the PC's to a location on our network where the PC3 and PMP files are stored, I get the same results.
We have two OS's here - Win7 Pro and XP Pro. All OS's are kept up-to-date. All the Win7 PC's use the same version of the HP Universal Print Driver. All the XP PC's use the same version of the printer specific drivers.
View 8 Replies
View Related
Feb 18, 2013
We have a T790 44in, with 42" roll paper installed.
The thing I'm having trouble with, is getting it to act like it has roll paper. I can set custom paper sizes in the printer drives all day (such as 42" x 42") but this is only half way accurate, and can waste a lot of paper.
Is there a particular way to set the printer to use the roll paper?
View 7 Replies
View Related
Apr 15, 2013
I want to use "export Layout" using API.
Also tried via send command, but no use.
View 1 Replies
View Related
Nov 7, 2012
Everytime I open ACAD2013 and start from the "drawing1" position, model space is unworkably small, we are talking mm here.
How do I ensure that upon opening I have a workable sized model space ?
View 5 Replies
View Related
Jul 13, 2012
Shp file not printing in paper space, but WILL print in model space? This is Civil 3D 2013. If the issue was resolved by this method, please click on "Accept As Solution".
View 1 Replies
View Related
Aug 19, 2011
How to set the printer setting in Autocad that only show ISO paper size only? Currently i am using HP DESIGNJET 800 42 and when i need to do plotting, it show me a bunch of unnessary of paper size list as shown in attachment.
View 9 Replies
View Related
Aug 20, 2013
I have layouts set to print to a printer in the office, sometimes with different sized sheets. Everything worked perfect until we upgraded from Civil 3d 2013 to 2014. Where I'm gettin a problem now is publishing to PDF. It will cut off the left and right margins of the 11x17 sheets. I've tried everything and looked everywhere but can't keep it from doing that.
Is there anywhere to set the publish to PDF settings? I've played with the DWG to PDF.pc3 settings and no change.
View 3 Replies
View Related
Feb 21, 2013
I have a layout with a border that is alligned very well in the layout view (see attachement 1) but the whole thing somehow moves to the left when I preview the plot (attachement 2). I thought the dashed lines were supposed to indicate my printer's plot area. Is there a way to fix this anomanly? I have tried to play with page setup options, application options, but nothing works.
View 4 Replies
View Related
