I have a width. I want to move an object along the x-axis, with this width. No problem. But when the UCS is rotated, it still moves the object along the original x-axis.
How do I move the object along the x-axis of the rotated UCS?
Movement along the z-axis will always be 0 (2D only).
I'm doing a simple transform action. I want to move an object to a value on the Y axis. First of all, after recording the action, and setting the Y value to 64 px, the action is recorded as 64 pt, not px. This happens regardless of my 'Units' setting. Second, it ADDS the value to the current Y value, instead of just setting the new value, rendering the action useless.
Am I doing something wrong? I don't see a way to specify an absolute value vs a relative one. Is it just a limitation of Actions in Illustrator?
I'm rigging a shoulder pad to a biped and I'd like it to only rotate on one axis. Google hasn't been that useful, and I hope I don't need scripting for this kind of minor thing. I'm rather new to 3Ds Max Design but I'm learning fast and liking it so far!
I've attached what I want to effectively accomplish. I'm looking for a way to lock the z-axis of the object with the upper arm's z-axis.
EDIT: Reduced picture size.
Is it possible to automatically project the x-axis, z-axis or z-axis onto the sketch plane?
I.e. every time you open a new sketch the corresponding lateral and vertical axis will be projected onto the sketch.
1) How do I get the ucs Icon (X,Y axis) to not move when I zoom in and out. I want it to be stationary in the bottom left corner as I'm used to seeing it.
2) For some reason I cannot peform the simple task of drawing a line by picking a point and then entering a distance. Ever since I've been drafting with cad I have been able to type "line" in the command line and then am asked to "specify first point" (I do so), and am asked to "specify second point" (which I do). Normally I do this in ortho mode (0, 90, 180 etc.) For example, using 25', I lead the cursor to the right as my "second point", and the line normally shows up 25' to the right. This is not happening now for some reason. After I specify my second point as 25', the command linen states, "point or option keyword required" and does not draw the line. I'm sure the solution is an easy one but I've never seen this happen before.
can I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
In my sketch I want to move a smaller circle that is within a circle along the Z-axis. I've put the image below to avoid confusion. I am using Inventor 2012.
View 3 Replies View RelatedI found a program which rotates selected block(s) about thier insertion point. I modified it to rotate each of the block(s) about the y-axis. Works great. Now, I would like to change it so that it rotates a copy of each block about the y-axis and leaves the origial block in place. Its kind of like the mirror command exept it is rotating the new block(s) to the other side instead of flipping them. I want to keep all or the parameters of the block(s) the same as each original. I am using AutoCAD 2010. MOCORO is not recognized as a command. The new features workshop says to use the new command AMCOPYRM, which is not recognized either. Go figure.
(defun RotateDuplication (/ CN ENT theObjects SS)
(vl-load-com)
(setq SS (ssget (list (cons 0 "INSERT"))))
(repeat (setq CN (sslength SS))
(setq CN (1- CN)
ENT (ssname SS CN)
[Code] ......
Resizing objects is a mess in CorelDRAW X6 when objects are outlined with Scale With Object enabled to retain proportions after resizing.
None of the tools dealing with outlines (e.g. Contour or even Outline itself) continue to work properly after resizing the object.
I strongly suggest to recalculate outline property values after resizing if Scale With Object is checked. Don't just do it hidden somewhere internally in the object model by applying a temporary scaling factor. Instead actually recalculate the actual property values if Scale With Object is checked.
CorelDRAW Graphic Suite X6.4 @ Windows 7/Windows 8 - 64 Bit, Windows Server 2008 R2, Windows Server 2012
Basically, I would like to do this:
[URL]..........
(i.e., take two object Z axes and constraint them to be the same), but in C#. In particular, what puzzles me is that I cannot make
'Get the Z-axis work axis from the occurrent.
Dim oPartAxis As WorkAxis
Set oPartAxis = oPartOcc.Definition.WorkAxes.Item(3)
in C# because the Definition object has not a WorkAxis instance.
Is it possible to restrict the move tool only to the X or Y axis?
View 1 Replies View RelatedI have read that this feature was removed(??) in 2011. How to do it in 2012?
Use Axis Constraints is ON in the Grid and Snap Settings but when i hoover over the vertex the snap goes away and a small circle shows up. When i click the vertex and drag it the axis constraints are turned off. I use the vertex snap all the time.
I am having some trouble with moving vertexes on their local axis. When I move a vertex with the move tool (in local mode) the vertex moves REALLY fast and what is causing it. It works fine with the view coordinates enabled but just not on local.
View 2 Replies View RelatedMy rotate tool in maya seems to be "locked" i can't freely rotate whenever i left click hold the center and it only rotates where my viewport is looking at so if im at the X axis I can't rotate the Z axis. Tried setting my preferences to default and nothing. I've also set my rotate tool to default.
Whenever I move my camera say to the Z axis the Z handle gets selected and same when I move the camera to the X axis.
I have several pillars that I want to scale down to the same size, but I don't want to have to scale them individually or reposition them once I'm done. Is there any way to scale them all without making them move along the axis being scaled? (I should have made them instances of each other. My only problem there is that I couldn't reposition one pillar without moving the others. for future reference, is there a way to temporarily break the instance relationship so on can be edited?)
View 2 Replies View RelatedAny way to move objects in vertical direction (z-axis) in 3d views, without having to turn the view everytime to be of frontal direction. I would like to move entire objects - for example mass objects - up or down directly in a 3d view of random orientation, now only top- or bottom face can be moved vertically, the whole object moves only on xy -plane. Can vertical movement of an object be done intuitively graphically and/or can it be be numerically, feeding coordinates?
Have tried all sources, but cannot find solution, and refuse to believe that Revit would be the only 3d/bim software on planet where direct vertical manipulation of objects is not possible.
I go to grab an axis and move it, and the cursor is offset. See the movie.cursor_offset.mov
View 1 Replies View RelatedIs there any way of setting up an automated process/es? What I want to try to achieve is to move a layer incrementally along an axis,by say a few pixels at a time,whilst saving the frame generated,up to say 20 frames or more ?
View 2 Replies View RelatedWhat happened to the option/enter command in the move object dialog that has been around since the early days of Illustrator??? Instead of having to mouse click the "copy" button in the move object window, one could just hold down option with Return or Enter and the Copy command would happen rather than a simple move. Immensely useful for prepress work!
View 2 Replies View RelatedWe have walls constructed out of modular panels, represented by basic rectangles. Rectangles are a standard 16" wide. (length not important) Only when a rectangle is not 16" wide, would we need to show it's width with a dimension.
In multiple blocks I am creating, I need a stretchable rectangle, in which there will be a dimension.
However I do not want the dimension to show up when the rectangle is 16" wide. But I DO want the dimension to show when the rectangle is not 16".
So... When the rectangle is 16" wide, no dimension is displayed. When the rectangle is NOT 16" wide, a dimension is displayed.
pic of three rectangles next to aforementioned stretchable rectangle. When the one on the right is 16" wide I don't want to see a dimension.
I have several objects in a circular array. I want them to pivot on the y axis only so the Z faces toward the camera. How do I do this without the other axis (X,Z) rotating as well. The look at constraint wants to pivot on all three axis.
View 3 Replies View RelatedIs there a way to drag an object so that it strictly follows only the X or Y axis?
View 1 Replies View RelatedI need to animate an object rotating around an axis, and moving away from the axis simultaneously.
View 1 Replies View RelatedI wanted to know how to rotate an object on a free axis (a line that I create - by two points).
In the image i pointed out the line/axis...
I'm want to drag an objects anchor and have the position co-ordinates offset by opposite amounts so it doesn't appear to move postioin on screen. IS there a tool for that?
View 3 Replies View Relatedi try to make an animation. I create a cylinder and i want to rotate it by longitudinal axis. i click 'components', select the cylinder and after i click 'position' to select the axis that axis system appears in the right side of the cylinder not in the middle. If i continue whit this settings the cylinder will rotate by a circle not by his longitudinal axis. How can i move that axis sistem in the middle of the cylinder? I can drag it but can't place it exactly in the middle.
View 1 Replies View RelatedIs there any way I can extract the rotation of a block relative to the yz axis and xy axis. I can extract the insertion point and xy rotation but not the yz and xz.
View 9 Replies View RelatedIs it possible to rotate an object along the Y axis as opposed to just rotating in a 2D circle? I know it is possible to simulate 3D rotation, but that takes some tricky maneuvering in some cases. I was wondering if it isn't just a case of holding down a combination of Cntrl & Alt or Shift and dragging a selection point.
I have seen a video where a graphic is created - video is in high speed to show the various steps involved in creating the artwork and there is a section where it looks like the artist/designer rotates a rectangle so that the top left corner appears to be moving "out" of the screen and the right corner towards the "back" of the screen. It doesn't appear to be just a skewing of the object, but in fact it looks like it's in 3D.
If there is a quick easy way to spin an object, rotate it on one axis through the 360 degrees a number of times.
View 2 Replies View RelatedI am busy working on rigging a character ( See attachment) to the best of my abilities and am running into some issues:
I have made a nurbs curve object which I intend to use as a controller in my rig, I have however modeled my character with his arms in a 45 degree angle so I snapped this particular object to the wrist and aligned it with the geometry...here comes the fun part , because it is a controller I wanted to have a clean channelbox zo I froze transformations which neatly sets every channel to 0, it also snaps the local axis to a world pivot orientation....
I went in componentmode pressed the question mark thingy and thought it was working..but it still alters the values in the channelbox.
I basically want the same rotation axes editing capabilities as I have with joints, I will try fiddling with that next, but I can't believe that this can't be solved any simpler.
See the image in the attachment
In a training video on Illustrator cs6 a device is shown as follows, as the instructor manually resizes an Artboard using the Artboard tool:
Justin, the instructor, calls the little box that immediately shows width/height a "width and height box" but searching on that term is not productive. When I run the program the device is not available, not does the video explain what option makes it available or what might have changed on my particular copy to obscure or disable the box. While I know I can get the same effect by choosing the Info window, and can even adjust the parameters more precisely using the control panel bar, I would like to have the convenience of this box.
I note that in the same video series (from Lynda.com) the same type of display device is shown when the instructor resizes a graphic. After some 30 minutes of Google searches and searching for the identity of this device and how to enable it I come up empty.. An experienced Premiere editor, I'm trying to widen my skill set into more of the Adobe suite and new to Illustrator;