CorelDRAW Graphics Suite X5 :: Rotating Object Along Y Axis - 3D
Jan 26, 2012
Is it possible to rotate an object along the Y axis as opposed to just rotating in a 2D circle? I know it is possible to simulate 3D rotation, but that takes some tricky maneuvering in some cases. I was wondering if it isn't just a case of holding down a combination of Cntrl & Alt or Shift and dragging a selection point.
I have seen a video where a graphic is created - video is in high speed to show the various steps involved in creating the artwork and there is a section where it looks like the artist/designer rotates a rectangle so that the top left corner appears to be moving "out" of the screen and the right corner towards the "back" of the screen. It doesn't appear to be just a skewing of the object, but in fact it looks like it's in 3D.
View 3 Replies
ADVERTISEMENT
Sep 10, 2013
If I create some text and change it from the default size (24 pt) to 14 pt and then rotate it, the size changes to the default point size (24 pt, I have even seen it do ~17.54)
Appears to have manifested with v16.4
It also squishes the text...
View 14 Replies
View Related
Oct 12, 2011
I need to rotate something by 11.35 degrees, but X5 rounds the value to 11.4.
Where is the setting for angle precision, or whatever setting I need?
View 6 Replies
View Related
Jun 23, 2011
I am having trouble with the xy axis. They register 0 instead of the actual position of an object. Rulers are showing correctly, and guides show correctly. Recently re-installed X5 and Patches 1-3.
View 4 Replies
View Related
Aug 8, 2013
I need to animate an object rotating around an axis, and moving away from the axis simultaneously.
View 1 Replies
View Related
Jan 12, 2014
I wanted to know how to rotate an object on a free axis (a line that I create - by two points).
In the image i pointed out the line/axis...
View 2 Replies
View Related
Nov 16, 2012
I have two adjacent circles. I created two tangent lines between them on opposite sides. I want to connect the lines to the circles. So - I make the circle into a pie, and with the node editing tool, drag the nodes around until I see the little info text go from edge to "node" where it snaps on the nope of the line.
Before I start this, the lines are perfectly tangent. When complete, the lines are no longer tangent and the circle is shifted upwards, and is moved off the perfect tangent by different amount for each line. I can see a difference at 3200% and 11000% zoom at 0.5 point lines.
This occurs if I rotate the circle, or make the circle into an arc also.
It seems that when the circle is drawn, the center point about which its rotated, and from where the arcs/pies are drawn is not exactly center. This is happening when I manually rotate it. It I rotate it giving it a specific degree in the properties bar across the top, it rotates fine. For instance, repeating this again, the arcs of the circle is below one line, and above the other live by a lesser degree.
View 5 Replies
View Related
Sep 17, 2011
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies
View Related
Dec 9, 2012
Is there a way to exclude single attributes from being defined in a object style? As example: i want to define an outline that does not change width of the objects, but everything else.
There is a small tick box right of every attribute with help text "None this object attribute is not defined by a custom style" but i can not mark it. My feeling is, that i need to switch on this tick box to get the result i need, but i can not. When i click on it, it just gives me a greyed out "Revert". When i try to make child styles, there is a way to break the connection to parent style with these tick boxes, but no luck.
Is it a bug? I tried it with X6, X6.1 and X6.2
View 1 Replies
View Related
Dec 23, 2012
I need to find a way to cut the shape of one object out of another object. In the above photo I need to be able to print the black crosses without the printer printing the white ink under them (you can see where the black ink is not adhering to the white ink very well).
View 11 Replies
View Related
May 24, 2011
I need to measure the circumference around the outside edge of the cut out letters.
View 5 Replies
View Related
Dec 27, 2011
I have a logo which appears in the footers of all of our technical manuals. Word recognizes it as a picture, and so our printer prints it in color, not black and white, so we are charged for the color copies.
I have exhausted my options in Word, and have been trying to create it as a TrueType font in DRAW, so word just thinks it's a symbol, not a picture.
The only file I have of the logo is a .bmp, so I've been tracing it to get it into vector form to manipulate. However, after all of my welding, combining, front minus back ect. ect. ect., I still can't get it down to the "1 object" requirement to make it a font.
Here's the logo:
View 7 Replies
View Related
Mar 10, 2011
I can't remember how i created an object..how can I show you the object?
View 14 Replies
View Related
Sep 21, 2012
Where is the switch in CDR6 for toggling to only select an object per outline and not by clicking into the area. Used to be standard in the top bar.
View 5 Replies
View Related
Sep 15, 2011
I wish to align a text like this at an oval shape. The field of the text body does align at all - which I can understand. Using the grafic text, it aligns directly on/ over the outline of the oval shape. But I won't have the whole text in a round - I just want to have the paragraph's left side to be aligned/ positioned at the outer shape of the oval.
View 4 Replies
View Related
Dec 12, 2013
Is it possible to create a macro that would take an image made up of multiple objects and separate each object on a new page?
View 3 Replies
View Related
Aug 6, 2011
Is there a reason why the radius of curvature at the corners of an object is not maintained when you either stretch it or shrink it? Is there a way around it without having to redraw and reset the radius?
View 9 Replies
View Related
Feb 9, 2012
I have a background image with Linear transparency applied on the top of my image. I would like to replicate the same transparency on the bottom of the image. How can I do this?
View 4 Replies
View Related
Nov 26, 2011
Im trying to cut out the centre of the letter R below. Normally I break curve apart, select the centre, and trim it from the outer. I can then select the centre piece and remove it. As you can see, this has worked with the letters P & O. When I do it with the R it seems to have worked, to the point where I can even select the centre and remove it, but when I put it back over a coloured background, it is still white.
View 8 Replies
View Related
Oct 11, 2012
I just upgraded to X5 the other day and started working with it. All seemed pretty normal until I drew a rectangle with a hairline and no fill. I typed in some text and went to click off of it to start a separate line of text only to find out when clicking inside this shape, and any other shape I made, it would select the shape.
View 8 Replies
View Related
Jul 19, 2013
I know how to use the transparency tool to make and object partially transparent but is there someway to make an entire object transparent so that what you put behind the object shows through? I am using the symbol of our logo and want to put pictures behind it so that they show though.
View 5 Replies
View Related
Mar 11, 2011
in Draw X5
when I click on an object from the object manager... then I want it at the top of my drawing
so I hit Shift+PageUp
(or Ctrl+PageUp)
instead of working... it takes me to "Page 1" at the top of the object manager
HOWEVER, if I click on the thing from the canvas, it works...
this is a silly bug... the whole point of me selecting it from the object manager is so I don't have to hunt for it... because it's UNDER some other stuff.
... that's why I want it shifted to the top of the layer.
As far as I know this problem is reproducible... I'm using a circle and it's under a bunch of stuff like rectangles. I can be more specific if necessary, but it's pretty basic.
View 14 Replies
View Related
Nov 19, 2013
I use Corel Draw X6.4 on a 64-bit Windows 7 PC, but since the first installation of Corel Draw X6 I have following problem:
I use millimeters as metric scale and when I create any object, the object manager states that the outline width of that object is set to 2 mm, but it is obvious that the width is only 0.2 mm. Now if I try to change the outline width to 1 mm, Corel draws the outline with a width of 10 mm instead and the object manager says that the width is even 100 mm. To solve that problem I always have pressed the Undo-button, so the width changes to the desired 1 mm but the object manager still tells me that the width is 10 mm.
View 7 Replies
View Related
May 9, 2013
Is it possible to do transparency all around the edge of an object. say you had drawn a circle can you make the edge all around transparent or say make just the middle transparent?
I often find that I would love to fade out in more than one direction.
[URL]......
View 10 Replies
View Related
Nov 19, 2011
I have made an object using the artistic media tool and I would like to copy and paste it, however when I try and paste it into my page there is nothing there but the bounding box. How do I copy and paste this object so it can be seen?
View 8 Replies
View Related
Aug 14, 2011
is there a way of aligning an object along a path? For example an elipse or an arc.
View 2 Replies
View Related
Jun 1, 2012
Can we set shortcuts for different positions like alt +f8 for moving the object right relative to its position, alt+f9 for moving the object left relative to its position?
Windows 7 [64-bit], Core i3 - 3.02 GHz, 4GB DDR 3 RAM
View 9 Replies
View Related
Jan 27, 2012
Is it possible?
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
View 1 Replies
View Related
Mar 8, 2012
One of the things I print in my business are mugs. The printable surface is 275 x 75 mm.
I would like to know if it is possible to show a visual impression of a mug with the design wrapped around it. I have X4.
View 9 Replies
View Related
Sep 18, 2013
I have this weird problem where some objects won't work like the usual. The original pic is like this,but when I see it in thumbnail in windows explorer, some objects are missing but they're still there when you open the file!
I marked the status bar, in those missing objects it says "Curve on Desktop" while other objects of corelDraw, no matter what kind of file, they're always written as "Curve on Layer 1".
And then when I Ctrl+G all the objects above in pic 1, all those objects with Curve on Layer 1 and Curve on Desktop, it becomes like this: I don't know what happened. When I made the shape in the 1st pic, I used old file with similar shape, I only edit the sizes & the colors, but previous File is just fine, only this one looks weird.
View 3 Replies
View Related
Apr 4, 2012
One of the things I print in my business are mugs. The printable surface is 275 x 75 mm.
I would like to know if it is possible to show a visual impression of a mug with the design wrapped around it.
I have X4.
View 14 Replies
View Related