AutoCad :: Find Area Of Roof Sheathing?
Apr 4, 2012How do I find the area of sheathing, rather than the flat area of a roof object?
View 4 Replies
ADVERTISEMENT
AutoCad 2D :: Roof Plan - Area Divisions
May 25, 2011I have drawn up a roof plan and want to section it off in big areas. Is it possible to draw a rectangle 48'x200' and have that shape fill the entire roof as close as possible. Basically i need my roof hatched w/ a 48'x200' rectangle.
View 5 Replies View RelatedAutoCad 3D :: Calculate Area Of The Roof Using Command Edge Mesh
Oct 13, 2011I need to calculate area of the roof created in 3d autocad 2009 using the command edge mesh.
I cant convert it to solid or anything else. This roof if created using 4 arcs joint together in 3d environment and with command edge mesh.
Revit :: How To Create Roof On Left Hand Side Of Taller Area
Feb 5, 2014I attached a photo of the project i am working on. Im trying to figure out how to create the roof on the left hand side of the taller area. It should be a arched roof just like the others except it is also rounded.
View 3 Replies View RelatedAutoCAD Architecture :: Default Cleanup Priority For Sheathing?
Feb 8, 2011The table in the Help that lists suggested cleanup priority values for various wall components does not include sheathing. The table lists 900 as the index for siding, but I assume that's a different number from sheathing. If I have steel studs, then 1/2" sheathing, then 2" rigid insulation, then 3/4" strapping, then wood siding, the priority number for sheathing should be higher than the studs, and lower than the rigid insulation, strapping, and siding, right? 500 for the studs, 600 sheathing, 700 rigid insulation, 800 for strapping (which could also be considered an air gap), 900 for siding?
View 1 Replies View RelatedAutoCAD Architecture :: What Is The Disadvantage To Convert Ia Roof To Roof Slab
May 15, 20131.How can I edit the roof in attached dwg to be like in attached jpg?
One option I think it would be to convert it to roof slab.
What is the disadvantage (if any) to convert ia roof to roof slab?
Can I create it in other way ?
2. In section 2, the first floor walls ends in 90 degrees angle at the roof. Can the walls be edited so that the joint line with the roof follow the roof slope?
AutoCad :: Find Area Of Certain Room In Drawing
Jan 9, 2012Today i Get new Drawing then i tried to find out the area of certain room. Then The Room less than 10 m2 is ok but the area more than 10 m2 meter is coming like this area 1.03310963E+07. How to change this setting.
View 3 Replies View RelatedAutoCAD Inventor :: Find Dimension In Drawing Area?
Apr 16, 2013My question is to find the dimension in the drawing area
for example
If we observe in the drawing left hand site we can see alphabets in the border area and number at top border area
if the dimension lies between "A" on left hand side and "1" on top border srea
then i want a message the dimension lies on A1
AutoCAD 2013 :: Find Volume Using Line Area And Elevation?
Sep 26, 2012I made a lake using lines set at different elevations to show depth, is there a way to calculate the volume of the lake in AutoCAD 2013 from just the line elevations and area without having to make the lines a solid surface
View 2 Replies View RelatedRevit :: How To Have Single Slanted Roof Go Across Perimeter Of Home To Form A Roof
Dec 11, 2013I am currently working on a home where i need to have a single slanted roof go across the perimeter of the home to form a roof. But, i have run into the issue of not being able to connect the circled area(see attached) Is it possible to connect those separate roofs and if so how?
View 1 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: How To Find If Point Inside Polygon / Block's Area
Sep 20, 2011How would I go about this. if a two blocks or polygons are overlapping area?
A good method or the algebraic formula for a function to tell me if a point is inside a polygon or block's area?
Revit :: Get Roof Soffit To Have Same Rafter Cut As Roof?
Feb 11, 2014How do you get the roof soffit to have the same rafter cut as the roof?
View 1 Replies View RelatedIllustrator :: Find Exact Area Of Irregularly Shaped Object?
Feb 19, 2013Is there a way to find the exact area of an irregularly shaped object? If there is, does the procedure work for compound paths (objects with holes in them)?
View 3 Replies View RelatedAutoDesk Smoke :: Unable To Find Filter Select / List View For Record Area
Jun 13, 2012I cant seem to find filter select or a list view for the record area. Both of these functions come in handy on feature films and episodic television especially vfx heavy shows.
View 2 Replies View RelatedRevit :: Create Roof With Same Line On Top Roof Face And Vertical Side Face?
Nov 4, 2011creat roof with same line on top roof face & roof vertical side face?
View 2 Replies View RelatedAutoCAD 2010 :: Choosing A Plot Area - Non-active Area No Longer Grayed Out
Apr 6, 2009I've recently migrated from AutoCAD 2008 (non-industry specific) to AutoCAD 2010 so I don't know if this was an issue in 2009.
Back in 2008, when I choose the 'window' option when specifying a plot area, AutoCAD would show the workspace so that I could manually select a windowed plot area, and at the same time the whole workspace would be greyed out except the previously active window area.
This was handy, because we can have as many two dozen title-blocks (and therefore separate viewports) in paperspace, and knowing what plot area I last plotted or added as a saved page setup.
In 2010, it no longer does that. I now have to rely on the dashed border to know where the active plot area is/was (checked 'display printable area' in options>display tab) which I personally don't really like using.
AutoCAD Civil 3D :: Area / Square Area In Closure Summary Of Mapcheck
Oct 23, 2012How to changes the settings for the "Square Area" in mapcheck's closure summary. When I right-click the dwg name in the Settings tab of Toolspace and choose Edit Drawing Settings, then Ambient Settings, I see the Area settings, but in the closure summary, there is also "Square Area". Why are these both there? It WOULD be nice to show sq. ft. as well as acres, but I can't find anywhere to edit it.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
AutoCad :: How To Draw Line Based On Area Of Encircles Area
Oct 12, 2011I want to know if there is an easier ACAD solution for drawing. In the given triangle of ABC (sides and angels are known) I want to draw line CM so that the area of BCM becomes 2000 cm (are of ABC is 5311.7 cm3).
Is there an easy ACAD way for drawing this line without using trigonometry for calculation?
AutoCAD .NET :: Efficient Way To Determine Whether Area Intersecting Another Area?
Apr 14, 2013I need to determine whether an area intersects with another area.The left case can be easily determined by Polyline.IntersectWith(Polyline...).But in the right case, the two polygons intersect/overlap each other while polylines do not intersect.
What would be the efficient way to determine the right case polygons are intersecting polygons?
Paint.NET :: Select Area Within JPEG Image To Blur That Selected Area?
Sep 19, 2011Photo editing. How do I select an area within a .jpeg image so I can blur that selected area?
View 2 Replies View RelatedAutoCad 3D :: How To Make Roof In 2010
Aug 12, 2012i dont know how to make a roof in autocad 2010, what is the basic step?
View 9 Replies View RelatedAutoCad 3D :: How Best To Construct Roof As 3D Solid
Jan 9, 2012I am having trouble constructing the roof for a 3d model. I have attached drawings which should allow you to visualise the type of roof I am aiming to construct.
I have had a go at using the box function then using slice to get the solid into the right shape but then I am unable to slice it at an angle as shown by the red dotted line on my attachment.
roof.docx
AutoCad 3D :: Drawing 3D Roof - Elevations?
Aug 7, 2011How to draw a 3D roof in AutoCAD if I provide the elevations in an AutoCAD file?
View 9 Replies View RelatedRevit :: Area Takeoff Of Only Selected Faces (red Area)?
Sep 19, 2012See attached file.
How can you do the area takeoff of only the selected faces (red area)?
Right now I have to use the 3rd party software to do something like this. I'm curious if there's a way to do inside Revit?
Illustrator :: Area Type Tool Will Not Draw Area
Sep 9, 2013After selecting the area type tool, I try to click and drag but I get an error message: You must click on a non-compound, non-masking path to create text inside a path. This worked before but I must have screwed something up.
View 3 Replies View RelatedAutoCAD Architecture :: Partial Hip Gable Roof
Sep 5, 2012How to make hip roof turn gable part way up the roof instead of at the bottom (which would be a gable roof).
View 7 Replies View RelatedAutoCAD Architecture :: Roof Elevation Property
Feb 8, 2008what the roof elevation property relates to and why? Actually, I know that it is the initial insertion point of the roof baseline, but why doesn't it update with grip edited changes in the elevation of the baseline? See the attached file. The three x-lines converge on 0,0,0. The roof elevation is stated as 0. Obviously that property is meaningless. Considering the importance of roof elevations and making them meaningful, you'd think there would be some rhyme or reason to that property.
View 4 Replies View RelatedAutoCad 3D :: Machine Lagging On Roof Tiles
Jul 21, 2011I am currently drawing some roof tiles for a house in 3d. I moved the tiles to another drawing so i could get my machine to focus on the tiles rather than walls, windows, doors etc. My machine is still lagging hectically. Basically i would like to know is there a way i can perhaps make the roof tiles file smaller or a "block" of it so that my machine can run properly and i can import it into the drawing with the rest of the house. The roof tiles drawing is 40.3mb big. My machine isn't inadequate-hopefully.
I am on a mac running vmware fusion with windows 7 32-bit and when opening editing the roof tiles file my cpu % spikes to roughly 70% then backs quickly down to 50% and will not increase with Autocad not responding-leave it for a bit and it loads but lags a bit when i orbit, copy or whateva then back to not responding.
AutoCAD Architecture :: How To Ascertain Roof Volume
Nov 9, 2011How to ascertain the volume of a roof formed in Autocad Architecture?
View 3 Replies View RelatedAutoCad 3D :: Model Of Timber Roof Frame
Mar 15, 2013where I could download, a 3D model of a timber roof frame in .dwg format? The type of frame I'm after is a hip/valley system, similar to the system described in the attached pic, but must also include all of the internal members (i.e. underpurlins, struts, ceiling members etc.)
en5156b0078.gif
Will be using it to train new staff to visualize the members and how the whole structure ties together.
AutoCad 2D :: Draw Garage With 8/12 Roof Pitch
Jun 12, 2012Im trying to draw a garage with an 8/12 roof pitch but I don't even know where to start with the roof. I just got out of autocad 1 but we didn't talk about roofs. It is a 27x25 garage.
View 2 Replies View Related