AutoCad 3D :: Drawing 3D Roof - Elevations?
Aug 7, 2011How to draw a 3D roof in AutoCAD if I provide the elevations in an AutoCAD file?
View 9 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Elevations Change During Insertion Into Drawing
Jun 21, 2013I have imported a survey file. When I insert the points into the drawing, the elevation changes to something that isn't even recognizable. When I view the point in the survey tab, the elevation is correct, when I view the point in the prospector tab it is different.
View 4 Replies View RelatedAutoCAD Civil 3D :: Extract Elevations From Survey Drawing
Sep 24, 2012I've been sent a survey drawing with elevations. The format is a block, but it's not a named block. Each entity has it's own block name. So, I'm having trouble getting at the elevations. I can't seem to export and get the elevation or Postion Z.
I've tried exploding these blocks, but all I get is a couple of polylines, and some text. Useless. I've attached a sample drawing with a couple of these points.
AutoCad :: Replace All Existing Elevations In Drawing With Same Contents
Mar 3, 2011A way to substitute the contents of a text throughout the drawing easily? What I want to do is substitute all existing elevations in the drawing with the same contents, but enclosed in parentheses, so that: xxx.xx becomes (xxx.xx)
View 8 Replies View RelatedAutoCAD Architecture :: What Is The Disadvantage To Convert Ia Roof To Roof Slab
May 15, 20131.How can I edit the roof in attached dwg to be like in attached jpg?
One option I think it would be to convert it to roof slab.
What is the disadvantage (if any) to convert ia roof to roof slab?
Can I create it in other way ?
2. In section 2, the first floor walls ends in 90 degrees angle at the roof. Can the walls be edited so that the joint line with the roof follow the roof slope?
AutoCAD Architecture :: Drawing House - Construct Components Of Roof System?
Mar 29, 2012I am drawing a house with a hip roof. The roof has a overhang with fascia and soffit. What is the best way to construct the components of the roof system. Should the hip roof and the soffit with fascia to be one system or two separate systems?
View 3 Replies View RelatedAutoCad :: Annotative Block With Dynamic Properties - Add Spot Elevations To Drawing
Jan 8, 2014I created the attached block to add spot elevations to a drawing. The block has attributes allowing elevations to be manually typed in, but also includes many dynamic features for rotation, lengthening, mirroring, etc. The block was created as an annotative block.
The block and all of its features work perfect as long as the dynamic features (rotation, etc) are not used after additional annotative scales are added. I often times have a drawing set at 1:10 or 1:20 scale and need to do an enlarged detail at 1:5.
What I would like to do is have this block set at 1:10 scale and 1:5 scale and manually rotate it (ideally using the dynamic features) at different angles for each scale. Is this possible and if so, why is it not working with this block? This works flawlessly when using annotative multileaders, so why shouldn't it work with blocks or is this just too labor intensive for the software?
I have also tried attsync, etc. and often times when rotating at different annotative scales, the text attributes go "bonkers" for the opposing scale when applying attsync.
AutoCAD Civil 3D :: Make Sure Annotated Surface Labels Spot Elevations From 3D Design Drawing
Dec 19, 2013How can I make sure the annotated surface labels spot elevations from my 3d design drawing which is being xrefed into a new Precise Grading Breakout Sheet plots screened?
The Label Style which I created for the annotated surface label spot elevations has all its properties set to be ByLayer for example its color and lineweight. The Layer I assigned the Label Style was assigned to a layer with a color and plot style that should plot any object screened. Color 8 and Plot Style Screened.
What other steps am I missing to assure myself that this Label Style will plot screened in my new Precise Grading Breakout Sheet?
I also made sure that the xref drawing in which this Surface spot elevation has the correct colors and lineweights and Plot Styles in my new Precise Grading Breakout Sheet.
Revit :: How To Have Single Slanted Roof Go Across Perimeter Of Home To Form A Roof
Dec 11, 2013I am currently working on a home where i need to have a single slanted roof go across the perimeter of the home to form a roof. But, i have run into the issue of not being able to connect the circled area(see attached) Is it possible to connect those separate roofs and if so how?
View 1 Replies View RelatedRevit :: Levels Not Showing Up On All Of The Elevations Even When Adjust The Drawing Viewport
Mar 27, 2012why have the levels not showing up on all of the elevations even when I adjust the drawing viewport??
View 1 Replies View RelatedRevit :: Get Roof Soffit To Have Same Rafter Cut As Roof?
Feb 11, 2014How do you get the roof soffit to have the same rafter cut as the roof?
View 1 Replies View RelatedRevit :: Create Roof With Same Line On Top Roof Face And Vertical Side Face?
Nov 4, 2011creat roof with same line on top roof face & roof vertical side face?
View 2 Replies View RelatedAutoCad 3D :: How To Make Roof In 2010
Aug 12, 2012i dont know how to make a roof in autocad 2010, what is the basic step?
View 9 Replies View RelatedAutoCad 3D :: How Best To Construct Roof As 3D Solid
Jan 9, 2012I am having trouble constructing the roof for a 3d model. I have attached drawings which should allow you to visualise the type of roof I am aiming to construct.
I have had a go at using the box function then using slice to get the solid into the right shape but then I am unable to slice it at an angle as shown by the red dotted line on my attachment.
roof.docx
AutoCAD Civil 3D :: FG Elevations At Alignment
Sep 12, 2005. How to assign proposed elevation to layout alignment along each station?. I know there is a way in LDT to assign proposed elevations to s specific range of stations or the full alignment, under menu "profiles/ FG Vertical Alignments/Create COGO Points" I am looking for the same one in C3D.
2. How to add connecting alignment label and station in profile view. For example I have an main alignment and in-between lot of other alignments are meeting with this alignment.
I want to show in profile view of the main alignment the meeting alignment's name and the station it meets with?
AutoCAD Civil 3D :: How To Get Precise Elevations
Dec 1, 2013How to get precise elevations at lowest and highest points. I need to get spots where the water flows and its precise elevation at that spot as analysis.
View 4 Replies View RelatedAutoCAD 2010 :: Different Elevations For Z Axis
Apr 3, 2012When I am creating a drawing, every so often, when I draw something, it gives me different elevations for the Z axis. Is there a way to keep that at 0? I'm not sure if it's because of vendors blocks, or whatever the reason, and I know how to change the elevation back to 0, but how do I stop it from starting to begin with?
View 2 Replies View RelatedAutoCAD Civil 3D :: How To Know Surface Elevations
May 3, 2012In C3D 2012, when I needed to know what elevation a surface contour was at, I simply hovered my mouse near the point in question and a small window would tell me what elevation my mouse was hovering at. Now, in 2013 I am trying to do the same thing but the little window only has the name of the surface and no elevations. So, how am I supposed to know surface elevations on the fly? Is there some setting to turn that back on?
View 3 Replies View RelatedAutoCAD Map 3D :: Label Elevations On Contours
Feb 15, 2011I'm trying to label elevations on some large contours.
The problem i'm having is that 'multi line' does not give me enough elevations, while 'advanced placement' gives far to many elevations for mapping and plotting purposes. Is there a way to have more control on how Map labels contours?
AutoCad 3D :: How To Draw 3D Bend With Given Elevations
Aug 31, 2011I am using autocad 2d from last 5 years. i want to draw a rectangular bend at a given elevation as shown in enclosed sketch. How to draw the same.
View 1 Replies View RelatedAutoCAD Architecture :: Partial Hip Gable Roof
Sep 5, 2012How to make hip roof turn gable part way up the roof instead of at the bottom (which would be a gable roof).
View 7 Replies View RelatedAutoCAD Architecture :: Roof Elevation Property
Feb 8, 2008what the roof elevation property relates to and why? Actually, I know that it is the initial insertion point of the roof baseline, but why doesn't it update with grip edited changes in the elevation of the baseline? See the attached file. The three x-lines converge on 0,0,0. The roof elevation is stated as 0. Obviously that property is meaningless. Considering the importance of roof elevations and making them meaningful, you'd think there would be some rhyme or reason to that property.
View 4 Replies View RelatedAutoCad 3D :: Machine Lagging On Roof Tiles
Jul 21, 2011I am currently drawing some roof tiles for a house in 3d. I moved the tiles to another drawing so i could get my machine to focus on the tiles rather than walls, windows, doors etc. My machine is still lagging hectically. Basically i would like to know is there a way i can perhaps make the roof tiles file smaller or a "block" of it so that my machine can run properly and i can import it into the drawing with the rest of the house. The roof tiles drawing is 40.3mb big. My machine isn't inadequate-hopefully.
I am on a mac running vmware fusion with windows 7 32-bit and when opening editing the roof tiles file my cpu % spikes to roughly 70% then backs quickly down to 50% and will not increase with Autocad not responding-leave it for a bit and it loads but lags a bit when i orbit, copy or whateva then back to not responding.
AutoCAD Architecture :: How To Ascertain Roof Volume
Nov 9, 2011How to ascertain the volume of a roof formed in Autocad Architecture?
View 3 Replies View RelatedAutoCad 3D :: Model Of Timber Roof Frame
Mar 15, 2013where I could download, a 3D model of a timber roof frame in .dwg format? The type of frame I'm after is a hip/valley system, similar to the system described in the attached pic, but must also include all of the internal members (i.e. underpurlins, struts, ceiling members etc.)
en5156b0078.gif
Will be using it to train new staff to visualize the members and how the whole structure ties together.
AutoCad 2D :: Draw Garage With 8/12 Roof Pitch
Jun 12, 2012Im trying to draw a garage with an 8/12 roof pitch but I don't even know where to start with the roof. I just got out of autocad 1 but we didn't talk about roofs. It is a 27x25 garage.
View 2 Replies View RelatedAutoCAD Architecture :: Roof Ends Disappearing
Mar 21, 2011Im new to autocad and started designing my own house in archictecture 2010.
I've been having a propblem with the roof design at the moment, i am trying to get the gable ends of the roof to stand up on a 90 angle on both sides by editing the edges/faces but every time i do this the roof ends disappear so theres a hole in the sides of the roof and you can see into the house. How to do this so they do not disappear?
AutoCad :: How To Indicate Roof Design On Site Plan
Oct 29, 2013planning consultant has asked me to show the roof pitches on a site plan.
View 9 Replies View RelatedAutoCad :: Find Area Of Roof Sheathing?
Apr 4, 2012How do I find the area of sheathing, rather than the flat area of a roof object?
View 4 Replies View RelatedAutoCad 2D :: Roof Plan - Area Divisions
May 25, 2011I have drawn up a roof plan and want to section it off in big areas. Is it possible to draw a rectangle 48'x200' and have that shape fill the entire roof as close as possible. Basically i need my roof hatched w/ a 48'x200' rectangle.
View 5 Replies View RelatedAutoCAD Civil 3D :: Calculating Volumes Between 2 Elevations
Nov 20, 2013We have a good size channel and the section for the channel varies quite a bit. We want to find the volume excavated in the channel between 2 elevations (it is the area of sand per the goetech report)? A template was not used to create the channel surface, breaklines and gradings were used.
View 9 Replies View Related