3ds Max Modeling :: Apply Shell Modifier On Custom Made Spline?
Jun 5, 2012
I am trying to apply shell modifier on a custom made spline (shown as 1 in image).But as soon as I click on shell modifier the spline disappears. I dont understand what is happening because I applied shell modifier on a similar custom made spline and it work properly previously (shown as 2 in image).
View 3 Replies
ADVERTISEMENT
Jan 7, 2013
i'm applying an extrude modifier to a simple spline shape, and i am accustomed to the extrude modifier generating a solid 3d object in the shape of the spline, if the spline is a closed shape.
however, in this case, the extrude modifier is generating just a 3d outline based on the spline's shape...
i can't figure out why i'm not getting a solid 3d object since the spline is closed (i checked all the vertices).
file is attached (the spline in question is named "upper side section")
daniel_k_sancturary_one07_1.zip
View 6 Replies
View Related
Jul 9, 2012
How can i apply a skew modifier to rotating wheel and preserve skew gizmo from rotation? I am trying to achieve a cartoon like fast moving car. Seems to be simple thing to do but I can`t get it.
View 1 Replies
View Related
Aug 15, 2013
I try to sweep along spline that made of elliptical arc and line.
Funny thing that I was able to create a solid few days ago by doing this method. Now I can't!
I tried even reload Autocad.
View 5 Replies
View Related
Sep 19, 2011
I have never used the HSDS modifier. Am I missing something?
3D Studio DOS to 3ds Max 2010
Windows XP 64
NVidia Quadro FX 3700
Dual Quad Xeon, 6Gb Ram
View 4 Replies
View Related
Apr 7, 2011
so this is the most annoying thing ever. I have a subdiv. i turned it to a poly (to get rid of the bloody shell in render view, i dont even know why its showing) when i did this previously, the shell went away when it became a poly, now its not. I'm new to how subdiv's work so am i missing something?
View 1 Replies
View Related
Jan 9, 2011
I use rhino 3d for a lot of my modeling and just recently been exploring 3ds max 2011, and I really like the mirror command in rhino because I can just click and mirror my object across a grid line, however in 3ds max the modifier is much more difficult to use in my opinion. If their are any former rhino users in the Area. way of using the mirror modifier to simulate the Rhino mirror command or even suggest another modifier that would preform in a similar manner as in rhino.
View 1 Replies
View Related
Dec 9, 2012
Is it possible to move an object as a modifier allowing me to switch on or off?
View 2 Replies
View Related
Jan 31, 2011
How can 2 sub-objects (modifier gizmos in this case) be aligned to each other?
Eg:
There are 2 similar objects, with a bend modifier applied. They have different orientations, but the 2 bend gizmos should be in the same orientation. (a stack of a few papers with slightly different orientations, curled from the corner)
I know there are at least 2 options, both are not very practical.
- Play with a compass helper instead of directly adjusting the first gizmo, and align all gizmos with the compass. This is a problem if you already have the first gizmo adjusted. It's also not practical to keep the compass and the gizmos in synch. And would make fine adjustments hard, as you wouldn't see the result live.
- Calculate the parent object's orientation and the gizmo orientation to find the gizmo's orientation to the world, then calculate the target gizmo's orientation. Or make a script.
View 4 Replies
View Related
Jun 28, 2011
I am trying to use the Boolean modifier more than one time on a box and it doesn't seem to work. I pick the Operand B to subtract on the second object I want to Boolean out, it disappears, but there is no hole there.
View 8 Replies
View Related
Mar 27, 2012
I am converting over from Softimage (which I love, but is Windows only) to Maya for OSX. Is there an equivalent in Maya to the new thickness tool available in Softimage 2012 SAP? For instance, if one creates a sphere polygonal object in Maya and slices it, is there a way to give the shell a thickness (like creating a bowl) other than just extruding?
View 1 Replies
View Related
Jun 21, 2011
As mentioned in my topic before, I have recently reverted to Max 2008.
I am doing a bit of Unwrapping, however I am missing the unwrap spline tool found in the Unwrap UVW modifier in more recent versions of max.
Does this exist in 08?
View 1 Replies
View Related
Nov 26, 2012
I'm trying to create a pillow but I can't get the narrow and tight shape with the cloth modifier. I have done exactly as the tutorials that I have followed, but I have done this several of times, but I don't get it like I want it and I'm wondering if I have missed something or if there are any values that I can change to get the cloth closer to the shape of the pillow? And why is some part of the pillow visible and not inside the cloth?
View 3 Replies
View Related
Oct 14, 2012
I am using Lines to model out the frame of this sword I am making, every time I apply the surface Modifier it only makes some of the lines into mesh.
Lines No Mesh: URL...
Surface Modifier Applied: URL....
Surface Modifier Applied (Perspective): URL....
View 3 Replies
View Related
Dec 26, 2012
Is there anyway to put modifier which only affects to some area (edges/poly/vertex) of an object? Like when using Turbosmooth, only half area gets smoothed, the other half still has the sharp edges?
View 4 Replies
View Related
Mar 7, 2012
I have linked a DWG-file from Autocad in to 3ds max. I would like to use the substitute modifier so that objects ends up on the right spot even if changes are made in the DWG-file. The problem is that in Autocad there is one block for example for the trees in a pot, but in max there is one pot and one tree. I would like to keep it that way so I am able to change the parameters for my trees.
How can i use the substitute modifier and pick multiple objects? It is not possible with groups, it only uses the one object I pick, even if it is in a group.
So, to make things clearer, I want multiple max-objects linked to one autocad block via the substitute modifier!
View 3 Replies
View Related
Jul 14, 2011
I am Using Mental ray (max 2010). I have made a topological displacement map at a very low resolution. it is 222 pixels wide by 111 pixels tall (landscape) It is greyscale and low rez because the mesh I am applying it to is 222 faces wide by 111 faces long. (landscape also). I did this because I needed each pixel to become a "height map" in its own right. Everything is working the way i expected.
My problem is.... I need to now make each face z planar. as it stands, they are all tilted in the direction of the grey scale falloff. I have tried splitting the edges of all the faces (quad) and using the make planar (z) function of edit poly mod. No matter how I set the pivot / ucs, when I apply the make planar z , they all average out to the same z plane. I need them to adopt the average of their individual z planes. I can do this but have to do it face by face. That's 24642 faces.
View 6 Replies
View Related
Jan 21, 2011
Just recently learned how to use the cloth modifier. It is awesome. It has worked pretty well, but one problem, I see little squares on my cloth after I run the simulation. Sometimes they are just a shade darker than the material, others, they are completely black, so it makes me think it is the squares from the opposite side showing through.
I am using a chamfer box so that my cloth has a thickness to it and a beveled edge. I tried a plane, but I don't like the way it looks, because it isn't thick enough. How to get rid of the squares? (see attachment).
Also, while I'm here, do I have to always sit through 100 frames when I simulate, or can I just hit simulate and have the cloth drop into place on one frame? I am not animating so I don't need the 100 frame span.
My specs are this quad processors, 8 Gb RAM, windows xp64bit, 3ds max 2011
View 2 Replies
View Related
Jul 25, 2013
I am using 3ds max 2014 and have not been able to select faces when using the Unwrap UVW modifier. My only choices are vertex, edge and polygon. I've tried to use flatten mapping with polygons instead of faces, but I'm not getting the results I want that way.
I've made sure that everything is converted to editable poly. I've re-imported everything to see if that changes anything, and still nothing. I'm attaching a screenshot of my unwrap uvw rollout in case that's useful.
View 1 Replies
View Related
Jan 23, 2012
I have never figured out a way to save my customized Modifier Sets. Whenever I have to reinstall Max or we get a new release I lose a lot of customization. I'd like to be able to save every singe interface tweak to make to carry forward to new releases.
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard,
Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram,
Quadro 4000 Display Adapter
View 9 Replies
View Related
Jun 7, 2013
How can I make Displace modifier to use objects existing mapping? Because when I apply a new Displace, the modifier makes a new mapping, even if i check "Use Existing Mapping".
See what i mean? I want those "cracks" to follow uv not a displace mapping
View 2 Replies
View Related
Feb 1, 2014
I would like to design the table from the image. I am having some problems giving thickness to the snail shell. I extruded it (wasn't that pleased with the result but... it was better than nothing) and tried to smooth it. The result was a horror because there were to many edges and maya took them as a height difference.
My question is:
1. How can i make the thickness better, without all the holes? (can i create edges between vertices)
2. How can i smooth the poly without making it look like a shell covered inside with spikes.
View 1 Replies
View Related
Apr 4, 2013
I am trying to create custom Materials in Inventor 2013. I have been able to create the custom appearances I want use on the materials and store them in the Inventor Materials Library.
After creating the custom appearance, Ive created new materials. When I try to change to new material appearance from default to my custom appearance, upon hitting the 'apply' button I get an error message which reads, 'failed to updated style'.
View 1 Replies
View Related
Jul 6, 2010
I'm using 3dsMax 2010.
I have created a big spline. When I tried to "Convert to poly", it doesn't work. Usually, as result, the spline appears with a filled. In my case, the spline disappears. I thought it might be because the spline is not closed, but it is correct.
View 6 Replies
View Related
Feb 21, 2014
how I can easily find openings in a spline and/or overlapping vertices and edges that prevent the extrude modifier from working correctly? I very frequently need to import .DWG's and .AI's and many times they have hundreds of vertices. Even after I apply a normalize spline modifier to diminish the vertex count, it can be quite tedious to find breaks and overlaps. I find fiddling with the weld verts also to be a pain (usually removes more vertices than I want). I just want to graphically see it on the screen the problematic areas if possible. Attached is a good example. I can easily see on 2 of the splines the yellow vertex to signify start/finish but on the 3rd spline I don't see anything. There are 2 vertices in the same spot and it looks like 1 white vertex. I've never really used Xview but I'm probably not using it correctly. When I use it I get a bunch of green vertices that aren't in any way overlapping.
View 2 Replies
View Related
Jan 30, 2013
I brought an Adobe Illlustrator AI file in to 3ds Max and extruded it into the shape I need.
I then beveled the parts that needed beveling. You can see the results, how do I get a smoother look to the beveled parts?
View 2 Replies
View Related
Jun 23, 2012
Script to clone an object along a spline so that if i modify that spline vertices all the clones are repositioned automaticaly?
I use to apply a Path Constraint to initial object position and then i call Tools|Snapshot to clone it, but this works just for distribute the clones. The path is relationed just to original object, not to the clones...
View 1 Replies
View Related
Sep 2, 2013
I have booleand two splines, that were beveld to give them depth, than booleen together to make the shape of a car. I am having trouble completing the modeling because of the mesh. Is there anyway to make the mesh better (as in like a grid)?
View 4 Replies
View Related
Jun 15, 2011
I am trying to put a helical coil around a curved spline as shown below. why my image wont upload its only 18k?
View 4 Replies
View Related
Jun 6, 2011
Can you apply tranparency to a stroke made by artistic media? his seems like it should be possible... I've been told to use the transparency tool for my type of transparency needs... but I can't find a way to get this to work. It would be handy... in PS, you just adjust the transparency slider for the object or layer. In Draw, how is this done specifically for an artistic media brush stroke?
View 1 Replies
View Related
May 29, 2012
How can i achieve symmetry on a spline by adjusting the handles of the vertices? The copy/paste tangent button is only useful for vertices with handles pointing in the same directions, how can i copy/paste tangent (same length) but pointing in the opposing directions, it would be like mirroring tangents?
View 3 Replies
View Related