I have added an image plane to an existing newsroom set. I would like to 'lock' the image plane to the camera so that it doesn't 'slide' when panning/moving the camera. Like a corner pin per se.
View 5 RepliesSo I have set camera view in my viewport for a perspective view. This goes okay but when i close my drawing and open it again.The view was changed. I have tried locking my VP, set UCSFOLLOW to 0, display locked=YES as stated on other VP problems in threads. What setting am i missing?
View 2 Replies View RelatedI use inventor 2013. Whenever I start a new sketch and select the top plane, the camera changes so I look at the top plane but also rotates 180degrees. I really hate that the camera rotates 180 degrees because it causes me to always see the drawing upside down (and then change the camera... every time...)
Is there a way to disallow inventor to cause this treason?
a few things involving cameras. My assignment was to use our plane that we modeled with poly's and animate it on a motion path(used cv curve tool) and have a camera above it follow it. Now I got that down perfect.
But what I don't have a clue on, is how do I attach a camera on the same motion path as the plane and have a camera angle right behind the spinning propeller? Like a cockpit view.
Panning / dollying the camera, the image plane is still trying to maintain a 'forward' looking view to the camera. I would like to lock the talent / image plane so that when I do a camera move, the talent is 'sticking' to the virtual news room I have used.
View 2 Replies View RelatedHow would I stretch a 3d image (like the one pictured below) onto a 2d plane in illustrator cs6?
View 1 Replies View RelatedHow to make a new work plane rotated at an angle to another plane and passing through the axis of a cylinder, or one of the main axes.On the plane commands, in V2013, i don't find an option for plane at an angle
View 1 Replies View RelatedI'm got my image and everything set up but when I create an object, which I made see threw in "object properties", the object looks grainy like an old tube tv's going out. IDK
View 2 Replies View RelatedI'm using Maya 2013, and any time when I would like to import an image to my workspace, an error show up on the bottom right corner:
# Error: file: E:/Games/Autodesk/Maya2013/scripts/others/fromNativePath.mel line 90: (unicode error) 'ascii' codec can't encode character u'xf3' in position 29: ordinal not in range(128)
#
file -i "C:/Documents and Settings/Maródi Marcell/Asztal/iron_pickaxe.png"
I created a new scene, added the image planes. But now I cannot move them, it's all gray.
View 1 Replies View RelatedI am new to 3ds Max and trying to teach myself using a tutorial book - Mastering Autodesk 3ds Max Design 2011, however I am using 2012 version.
I am on a step where it is explaining how to assign a bitmap image onto a plane, however, I cannot get the image to show up.
I create my plane add the image to the diffuse map deselect real-world scale option change the tiling value for U V to 1 and deselect tiling for both
select the plane I want to add the image to click the assign material to selection button (I dont see anything change at this point) Then the final step it says to click the "show standard map in viewport button" - I cannot locate this button within the material editor... there is a grayed out "put material to scene" a "show shaded material in viewport" ??? neither seems to do anything?
I just downloaded 2013, and I am trying to learn how to use it through a book to work with my future school designs. I, of course, have little assignments to do to learn how to work the basics of this program. I am at the point where I am creating a bitmap image onto a plane. I worked it the book's way, and the selected plane did not change to the image I chose; it remained a gray color. I then looked up tutorials online and have the same results. The material editor is changing, but not in the viewport.
View 2 Replies View RelatedI have set up a plane on whicg I have a referance image that I will base my model on. The problem is I can't see image after I start to block it out. When I turn wireframe on the image disapears?
How to I see referance plane image and have the rest in wireframe?
looking at the image plane and the 2 inputs I used - diffuse / opacity (alpha channel), what parameters are the best way to adjust the image plane brightness / contrast / levels (photoshop style)?
That’s what I like about these forums. A great way to get straight to the point and learn stuff fast.
why when i first import the image plane it is selectable but after awhile it became nonselectable ? no referencing or layering though
View 2 Replies View Relatedgetting a weird problem. at first when I had 2 image planes (front and side) every time I saved my scene and restarted, they would both disappear from perspective view. but they were still showing in ortho view. I'd have to delete the image plane and make it again. after adding a back camera with its own image, saving and restarting: it started to have all of them show in perspective, but now front and side dont show in ortho.
edit:: the first issue happens in 2011. the second in 2012. back cam probably has nothing to do with it.
I have integrated a live action image plane into my virtual newsroom set. adding shadows to the talent that are in the image plane?
View 3 Replies View RelatedI am trying to align my model to my image plane. I marquee select the vertices but only the one in the front selects I have checked Back face culling and soft selections and made sure that they are not on but it is still not working.
View 2 Replies View RelatedMy Nikon D3 is set to save each image as nef and jpg (fine, large). Why is the jpg image opened in camera raw different from the same image in nef?
CS5 with Windows Vista.
I have a still image of a view looking up at a complicated building (no ground in shot). There are lots of square features so I know where the right angles are but I have absolutely no information on any distances/dimensions at all and no info on the camera (focal length etc…).
I can get close by eyeballing it in 3D Max, tweaking cam position and focal length and proxy geometry but I’m sure there is a way to do this more automatically in Matchmover (which now ships with Max).
In Matchmover 2011 I created 4 track points on my image in 2D mode, 1 on a vertical corner as the origin, 1 directly above as Z, and 2 either side of the origin using the mortar lines to keep them level (all are as far away from each other as possible to increase track accuracy). I then make a new coordinate system and snap the origin, then Z and finally the X,Y nodes to the corresponding track points.
The last node I snap whichever one it happens to be, wont snap like the others. It just pings back.When I “solve for camera” it complains that it needs at least 2 images with 7 points in common or 4 points with known 3D coordinates.
There is visible lens distortion and I think this needs correcting somehow, other than the distortion parameter for the camera but this feels like stabbing in the dark as I have no way to know what distortion to apply.
I have a image plane. I would like to move the image of the plane in animation. It looks out then masking. I need only some parts of the image in frame one, and I need other parts of the image on frame 100. The plane isn't moving, only the image is moving in the box.
View 2 Replies View Relatedis there a way to open an image in camera raw within photoshop cs6 (on a PC)? or do I have to use bridge to do this?
View 1 Replies View RelatedWhat happens to a camera raw image when it is opened in Photoshop? I have PS12 and receive raw images from our photographer and I'd like to know what type of manipulation, if any, occurs to an image as it is being read into Photoshop.
View 4 Replies View RelatedI have been using Bridge for years and when in "Filmstrip," the file name and rating ( 1star, 2 star...) were underneath the thumbnail. But all of a sudden the words "Camera Raw image" began appearing underneath the thumbnail. So now beneath the thumbnail it says:
203A91/CR2
**** (4 stars)
Camera Raw Image
Camera Raw Image
I don't know what I did to cause this but what can I do to get rid of the two "Camera Raw image" label.
In camera RAW, to save a JPG you click on the 'Save image...' dialogue and another window opens with the JPG options. To skip this window and directly save the image, you hold down the ALT key and click on the 'Save image'. Is it possible to reverse these settings, so that if you want the JPG dialogue to open you have to hold down the ALT key and to save without the dialogue, you just click on the save button?
View 3 Replies View RelatedI;m hooked on Infrared and have a Canon XT and a couple of older Canon Point & Shoot converted to IR, I would love to see th same cumtom WB image that I see on the back of the camera. I've started capturing in both RAW +JPG in hopes the jpg will show the settings. I'm importing to show as separate files.
Is there a way to keep LR from changing the bluish tone of a 590 nm supercolor IR sensor image to magenta?
Is there a filter or preset or develop setting I can use to just maintain the original color quality of the JPG?
Suddenly Images showed much shorter than from Camera.With Canon 50d , took some garments and it looks fine from camera.But when I see from Bridge and Photoshop, images look shorter.
View 8 Replies View RelatedWhen I go to open a CRW Image in CS5,Bridge It will not open.It says Could not complete your request because it is not the right kind of document.
PS How do I tell what version of Camera Raw I have.By the way I have a Canon EOS 10D camera.
My images look fine previewed in my digital camera (Leica Digilux1) but when I import them to Photoshop they are much darker. I import using a Dazzle card reader as my son shares it and his camera has a different chip.
View 5 Replies View RelatedI am having a problem with camera mapping...I get everything setup and looking good, but when I render it, the image looks really washed out. This happens with both scanline and mental ray rendering. I have done this in the past using max 2009 without any issues.
View 3 Replies View RelatedIs it possible to read raw image data into Gimp? By raw, I mean image data without a header or compression, i.e., RGB, 16-bit unsigned, or 32-bit floating point grayscale, etc.
I see "Raw image data" under "Open > Select File Type", but grayscale isn't listed. Is the only option? Are there any add-ons for grayscale?