My images look fine previewed in my digital camera (Leica Digilux1) but when I import them to Photoshop they are much darker. I import using a Dazzle card reader as my son shares it and his camera has a different chip.
View 5 RepliesI have been using CS5 64 bit and recently my prints have printed darker than the screen. I recalibrated the monitor and then new icm is being used. I also have the correct icc for the paper. I switched back to CS5 32 bit and the problem goes away.
View 2 Replies View RelatedEverything is calibrated. That is not an issue.
When I work the photo (JPG, TIFF or PSD) to where it is what I want, the preview is darker in the print preview. Probably one f/stop in photo terms. And, THIS is how it actually prints.
What is causing that? And, is there a fix?
None of the "show paper color," etc. are checked, so that is not causing the difference.
Prints from 2400 look good, but darker (about a stop darker) and bit more saturated that seeing on my calibrated Sony Artisan Monitor.
I can get good prints, but I now have to add an adjustment layer to files and lighten them all up, a real hassle. I don't remember this issue ever before.
I've tried all the different rendering intents.
I was using Adobe Bridge to combine sets of 3 photos with different exposures to create HDR images and sending them to Photoshop. So far today I made 20+ such images and successfully saved them into PSDs.
I just ran into an odd problem. After clicking 'Merge to HDR' in the Bridge -> Photoshop option, Photoshop did it's thing of merging my 3 images. The preview window came up, it looked perfect, so I clicked 'Ok'. Then it created an Untitled document (as it always does), except that this image is much darker than what was shown in the preview. I tried doing some light adjustments, can't get it to be what I saw in the preview window.
All of my other HDR creations were exactly the same as I saw in the preview window. What's going on?
in photoshop CS4, I use Adobe RGB (1998) as my working profile. I open a document, I change it's profile from RGB, using "view"-"mode", to anything else, say Lab, and everything is fine up to now, but then I undo the change, and what I get is a darker image than before. I don't get the original image I opened. Same thing happens if I use the "convert to profile" option also.
I close the image and reopen it, it still looks darker. I restart photoshop and open the image, only then I get the original image with normal colors again. This happens only when I convert back to RGB, not from RGB and not between any other profiles.
at some point, change the color profile from RGB to any other profile and then back to RGB the image looks darker, and the only way to fix this is restarting photoshop. this didn't happen in any versions before cs4, what should I do?
I'm trying to save a file as web content (either jpg or gif) but when I save the file it is much darker than the original.
If I view the saved version of the file in PS there are no issues, but once I view it in a browser, the issue arises.
Is there a way to control this? I've never had this problem before while working with photographs or other files.
For the record I'm using PS 6.0 for PC and the browser I'm using is IE 5.5.
Tried the same image printed using corel and Photoshop. same setup: let software handle color, color off in printer, same profiles and settings otherwise. the corel print is a bit darker and some colors are slightly different than the same image printed thru Photoshop.
I usually print designs created in corel as there is added text and graphic elements. Can't print those using PS. just odd there is noticeable color variations.
I want to replace green background in the top image to darker and lighter pink stripes to match the color of the website.
I've been going in the direction of:
1) Select color range (Pick green and just + the other shades of green to it)
2) Create Clipping mask from the Selection (I actually have all the green backround on white and nothing else on the screen).
I'm a Creative Cloud subscriber, using Mac OS 10.8.1. For some reason, when I open a raw image in ACR, the adjustment screen displays a black backgrond. Black text on a black background. The slider bars show up, but I can't read the labels, and have to go from memory. I uninstalled and then re-installed Photoshop CS6, tried to find where ACR;s prefs are located so I can try trashing them and so forth - all to no avail.
View 4 Replies View RelatedSo I've been trying to follow some 3d camera tracker tutorials to the tee but I keep having the same problem. When I go to render the video instead of the character staying in a fixed spot it starts to bounce all over the video.
This is the main tutorial I've been trying to follow; [URL]
My error rate is only .73.
My Nikon D3 is set to save each image as nef and jpg (fine, large). Why is the jpg image opened in camera raw different from the same image in nef?
CS5 with Windows Vista.
I am working on the following image but the image that I'm working with on the screen is not the same as the output after I save it. What is happening and how can I fix this?
(the images have been reduced in size and quality so this is for illustration only)
I am making a video in Nero Vision 10 and need to cut out the screen of a tv so that I can layer the TV over an image/video so it looks as though it is on the screen. I enclose a screenshot of the project. 'Transform-tools-crop' only cuts in straight lines so I wonder which device I should use which can cut out an odd bespoke shape? You can see in the uploaded image from the project how the image currently cannot fill the frame without covering it.
View 7 Replies View Relatedis there a way to open an image in camera raw within photoshop cs6 (on a PC)? or do I have to use bridge to do this?
View 1 Replies View RelatedWhat happens to a camera raw image when it is opened in Photoshop? I have PS12 and receive raw images from our photographer and I'd like to know what type of manipulation, if any, occurs to an image as it is being read into Photoshop.
View 4 Replies View RelatedI have been using Bridge for years and when in "Filmstrip," the file name and rating ( 1star, 2 star...) were underneath the thumbnail. But all of a sudden the words "Camera Raw image" began appearing underneath the thumbnail. So now beneath the thumbnail it says:
203A91/CR2
**** (4 stars)
Camera Raw Image
Camera Raw Image
I don't know what I did to cause this but what can I do to get rid of the two "Camera Raw image" label.
In camera RAW, to save a JPG you click on the 'Save image...' dialogue and another window opens with the JPG options. To skip this window and directly save the image, you hold down the ALT key and click on the 'Save image'. Is it possible to reverse these settings, so that if you want the JPG dialogue to open you have to hold down the ALT key and to save without the dialogue, you just click on the save button?
View 3 Replies View RelatedSuddenly Images showed much shorter than from Camera.With Canon 50d , took some garments and it looks fine from camera.But when I see from Bridge and Photoshop, images look shorter.
View 8 Replies View RelatedWhen I go to open a CRW Image in CS5,Bridge It will not open.It says Could not complete your request because it is not the right kind of document.
PS How do I tell what version of Camera Raw I have.By the way I have a Canon EOS 10D camera.
how to open image in camera raw in element11
View 1 Replies View RelatedI set levels in photoshop and then when I open them on my PC in Windows picture viewer they are much lighter and overexposed looking. How do I set up my photoshop CS2 to be at the same level.
View 3 Replies View Relatedway to get an image a have darker in the bottom , i need the image to get darker in a progressive way , starting from the middle and when get to the bottom , to be completelly black..
View 4 Replies View Relatedi'm downloading images and open them in photoshop. the only problem is that when i open them in photoshop, they all appear really dark, and when i view them in any other viewer they are lighter and how i saw them on the net.
View 7 Replies View RelatedI have PSE7 from before and recently purchased CS6. I want to keep using PSE as an organizer and edit in CS6. When opening a raw file (CR2) from the organizer to CS using Ctrl-h the image opens directly in CS without opening in Camera Raw first. If I open an image directly in CS it goes through CR first. How do I send the image directly to Camera Raw and then to CS from the organizer? I am running on Windows 7 64 bit. The Camera Raw for PSE7 if 5.6 and 7.3 for CS6.
View 4 Replies View RelatedWhy does the image quality seem to get worse in Elements 11 once the image is opened up after editing from Camera RAW? The image looks great in the RAW screen, then once opened in Photo editor it seems pixelated, smooth lines look jagged. Is it something I am doing wrong?
View 1 Replies View RelatedI have opened a jpeg as Camera Raw (7.3) and adjusted it and wanted to save it as jpeg, but the only option is *.dng?
View 3 Replies View RelatedI'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I have been using some tools successfully, but now when I try to use the Healing, Tool, Patch, Type and some others, the image drops off the screen as soon as I place the tool onto the screen. Then I cannot work on the image.
View 2 Replies View RelatedFor no apparent reason, some of the images on my computer screen are coming up in odd, bright colors similar to a negative, but not complete. It happens to images I open on independent web sites and images stored on my computer.
When I open some images in Photoshop5, it asks if I want to discard the embedded profile. If I answer yes, the image displays fine. If I answer No, the image colors are distorted. This problem persists on my laptop screen and on the monitor attached to laptop.
I need to silkscreen an image, but can only do one solid color at a time. I'll have a black t-shirt, so that's one color, then red, green, pink and silver to screen onto the shirt. I can only do a max of 4 colors on one background.
here's the image: [URL].......the link is missing the http : // because I'm a new member and can't post links yet :/
How to break this down into 5 cells of color in Photoshop (CS4)? Then I can silkscreen it.