Why does the image quality seem to get worse in Elements 11 once the image is opened up after editing from Camera RAW? The image looks great in the RAW screen, then once opened in Photo editor it seems pixelated, smooth lines look jagged. Is it something I am doing wrong?
View 1 RepliesI just installed PSE 11 from Adobe.com and my raw files do not open in camera raw?
View 8 Replies View RelatedI have PSE7 from before and recently purchased CS6. I want to keep using PSE as an organizer and edit in CS6. When opening a raw file (CR2) from the organizer to CS using Ctrl-h the image opens directly in CS without opening in Camera Raw first. If I open an image directly in CS it goes through CR first. How do I send the image directly to Camera Raw and then to CS from the organizer? I am running on Windows 7 64 bit. The Camera Raw for PSE7 if 5.6 and 7.3 for CS6.
View 4 Replies View RelatedI need to open my photos for the project I am working on in camera raw format to access the editing options I need. I repeat the same steps but they only open up in that format about half the time.
View 16 Replies View Relatedusing element 11 after opening a raw image the raw image editor will not open
View 3 Replies View RelatedI am trying to open a photo in camera raw and the image always has a lot of red and blue in the picture? What can I do to avoid this. When I first started learning photoshop this did not happen?
View 5 Replies View RelatedHow can I set the Instant Fix mode to save as maximum JPEG image quality?
View 1 Replies View Relatedhow to open image in camera raw in element11
View 1 Replies View RelatedI have opened a jpeg as Camera Raw (7.3) and adjusted it and wanted to save it as jpeg, but the only option is *.dng?
View 3 Replies View RelatedMy problem is related with the quality of a image.
My question is how to maintain high quality (original quality) of a image after resizing it?
If i resize it with same ratio like:
2816x2112px to 1600x1200px (4:3)
2816x1584px to 1920x1080px (16:9)
Mainly i use scale image option in Gimp. But now i need to resize many images for my work so i tried David's Batch Processor to resize my images. After using it, i found there is some quality promble with the resized image.
Then i tried, the scale option with, use quality setting from original image and JPEG quality parameter is 95, in gimp but the problem is same. I did it with also with David's batch processor- JPEG quality parameter is 95.
Other thing is that, the original image 2816x2112px (4:3), size- 3.6 MB is displaying in image viewer with 47% and the resized image 1600x1200px (4:3). size- 1.2 MB is displaying in image viewer with 83%, So my questions are: How can i check the quality of a image after resizing it, means the image is exactly same as the original? Or Is David's Batch Processor maintain the original quality of the images after resizing?. I realy need to resize many images for my work.
I am editing .CR2 files using camera raw, and when I save the edited version as a .tiff, my changes are being applied to my original .CR2 as well. I am losing the original .CR2 files.
View 3 Replies View RelatedHow can I have PS Elements 10 accepting the -.raf image files from my Fujifilm X10 camera? I guess there is an update for it somewhere but I cannot find it.
View 2 Replies View RelatedWhen I tap on an image in my Window's photo folder, a selection of programs pop up, but PS Elements is not one of the. When I press on browse, PS Elements 11 can not be found.
View 1 Replies View RelatedI am trying to import photos from my computer to Photoshop elements 11. It has imported most but wont import some as "file quality is too high". How do I get around this? Do I have to downgrade the quality of my photos? To do editing wouldn't you want the best quality photos to start off with?
View 6 Replies View RelatedI am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
my PSE11 was working fine until i bought a new camera and tried to upload photos from my RAW files. It gave me this message
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.Please visit the Camera Raw documentation for additional information."
so i tried to install the update.... installed it fine, kept getting the same message when i would try to open the photo. after researching online i found the suggestion of uninstalling and reinstalling photoshop elements. i did that once, tried the update again...same results. uninstalled again. tried the update again and still getting the same message. ive checked the adobe website and everywhere i look says the version of the camera raw DOES support my camera (nikon D7100).
After an, automatic, update to camera raw 7.3 in Photoshop Elements 11 all Camera Profiles are gone. All that is left is "Matrix". I use Elements 11, windows Vista on a 64-bit machine, my camera is a Nikon D7000.
View 2 Replies View RelatedI have been following tutorials on creating HDR images in photoshop using the 32 bit function.
Once I have created the 32 bit image, and saved it as a Tiff file. I then go into bridge and made sure the preferences for camera raw are set to enable suppoprted TIFFs. However I cannot open this image through camera raw, it just opens up in photoshop...
In the turorials I have seen this does not seem to be a problem for others.
Bridge will not longer allow me to open photo files directly into Camera Raw, saying a "qualifying" program must be open; I have Bridge and Photoshop CS 6.5 Extended open.
View 2 Replies View RelatedI am using Windows 7 32 bit system with 4GB ram and graphics accelerator.I have Photoshop CS5.1 installed in the same system at it works perfectly.
What happens is when I use the B+W function, I get an error message saying that I have not enough ram.After that, when I open the next photo with Camera Raw, the raw image will not open.
I have already maximised the Ram that Photoshop can use to 1.7GB and there is more than enough space in my scratch disk.
when opening images in camera raw sometimes the image does not appear but the information does.
View 8 Replies View RelatedOnly got the software yesterday, got off to a good start, I can open Jpeg files in Camera Raw but I am not getting the same options for raw files. Camera is a nikon D90, shots download okay but appear small in the preview and I can't make them larger or do anything with them. When I highlight a raw file, the camera raw option is not available.
View 4 Replies View RelatedI have CS3 Windows and have been reading Kelby's book 7-Point System where he opens jpegs into camera raw. However, the explanation is poorly written for someone who has never done that.
View 2 Replies View RelatedI'm trying to open RAW images in CS2. When I try to do it, an error box pops up saying that it's an unknown file type(.nef). I've even tried using the software that my camera came with, but that won't let me either.
Also, the image RAW dialog box doesn't even come up when I try to open a raw image...
way of opening images in CS2 where after opening they will appear in the middle of the CS screen rather then in the top left corner?
I can drag and maximize so they appear in the middle, but on reopening another image they default to the top left again, I would like them to always open in the middle?
My Ai file will not place in InDesign with out losing its smoothness. I have tried placing it from AI, I have also tried as a .tiff. I am not sure why it is losing quality.
View 3 Replies View RelatedJust purchased a Mac Mini and installed from disc my CS4. It is not opening any raw files taken with the Canon 50D, but will open raw files taken with Canon 20D.
This Photoshop CS4 was working fine for ALL of these files when it was installed in my old Mac Pro tower (vintage 2006). Why is it working for one group of files and not the other?
I've converted a JPEG to a Smart Object in CS6. When I double-click on the Smart Object icon in the Layer, it opens as a separate JPEG file. What do I need to do to get it to open in Camera RAW as Russel Brown does in this video?
View 9 Replies View RelatedI bought a Canon 6D last summer and recently decided to shoot in RAW (.CS2). My previous camera was a Canon Rebel t1i, and RAW files from that camera worked without a hitch. When I try to open raw files from the 6D, I get a notice that I need an update.
So I downloaded and installed the update for Camera Raw, and also downloaded and installed the associated DNG converter.
After working for a few weeks, Camera Raw has stopped opening Canon 5D Mark II files. Says it is not a readable file format but I know the files are not corrupt because they will open in the Canon utility.
View 5 Replies View RelatedA while back I took a Photoshop class and remember a lesson on where you could select a region of an image and save it for the web with a high quality and select another region of the same image and save it for the web with a low quality, so that the focal point was saved with a high quality and the background was saved with a low quality. I have no idea where my notes are from this class and can not remember at all how to do this. Can anyone direct me to a tutorial about this?
View 2 Replies View Related