I am editing .CR2 files using camera raw, and when I save the edited version as a .tiff, my changes are being applied to my original .CR2 as well. I am losing the original .CR2 files.
View 3 RepliesI am using PSE 11 on a MacBook Pro, OS X (10.3). I have a lot of old pictures to edit, and they are in date order, which is how I want them.
However, when I edit a picture and save it, it moves it to the bottom, with today's date instead of the original date. I have them set to save with the original as a version set.
Is there any way to retain the orignal dates, short of having to go in and reset the date on every picture after I save it? I really want them to be in date order under their original dates.
BTW, I used earlier versions that were Windows-based, and this didn't happen. When I saved them, the version sets stayed where they were.
Can I edit a video clip in PRE 12 and save the clip in place of the original clip, with the same file name, without going through the Project" program?
View 3 Replies View RelatedI have created a test roof for use (not right colour scheme) I have created as a two dimensional object.
I have created a house in perspective and need to create the shape below with the one above:
I don't want to distort my roof. There are lots of layers and paths as you can imaging creating a tiled roof.
how to get this without distorting my roof?
When transforming I am unable to increase size from original .image is stretched outside box but parts of image is outwith original size and is unseen.
View 3 Replies View RelatedThere seem to be a problem with PSE10 and PSE11 on my computer when loading image files digitized on my film scanner. When loaded into the editor the image file immediate takes today’s date and time, and thus changes place on the timeline. However, sometimes the original image file date remains intact, for no obvious reason. I find this very frustrating.
My setup is an HP computer running Windows7 Ultimate 64 bit, with i7 processor and 12GB memory. My film scanner is a Minolta Dimage Elite II working with a Windows XP-based computer, and data are transferred using memory stick.
It might be mentioned that I have made tests with a fixed set of image files on several computers running WindowsXP 32 bit, and several versions of PSE , including PSE10, without seeing this problem.
Sometimes when I want to edit a LR edited photo in PS, even when I open a copy with LR adjustments, some of those settings get lost when the PS file opens, especially brush adjustments.
View 7 Replies View RelatedWhen you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies View RelatedI have a rounded corner rectangle in a template that I am working on..I would like to extend the vertically but keep the rounded edge dimensions the same as I extend vertically.
Right now I extend the rectangle but the edges also extend.
how to open image in camera raw in element11
View 1 Replies View RelatedUsing Photoshop CS6, I opened a raw file in Camera Raw and made some adjustments. Then closed the file without opening it in Photoshop. I opened the same file in Camera Raw again and it remembered all of my adjustments. I want to reset the raw file back to its original before I made any adjustments. Is there a way to do that without having to go through each setting and changing them one by one?
View 5 Replies View RelatedAfter editing I cannot save the photo. I get the message, "file is in use or has been left open". What does this mean?
View 5 Replies View RelatedWhy does the image quality seem to get worse in Elements 11 once the image is opened up after editing from Camera RAW? The image looks great in the RAW screen, then once opened in Photo editor it seems pixelated, smooth lines look jagged. Is it something I am doing wrong?
View 1 Replies View RelatedI have opened a jpeg as Camera Raw (7.3) and adjusted it and wanted to save it as jpeg, but the only option is *.dng?
View 3 Replies View RelatedUsing Photoshop CS5.5 I am at a loss to find the means to discard all edits in Camera Raw and revert back to the original photo.
View 4 Replies View RelatedI have finished my photo editing but now it has a lock on the image. How do I end the Editor who seems busy all the time!
View 1 Replies View RelatedI have an image I am trying to edit in Photoshop Elements. It's a PDF file in which there is text, and images placed on top of the text. I need to lift up the images to see the text thats underneath.
View 1 Replies View RelatedI am suddenly having a problem here with enlarging my photographs that I am editing. In the past, I would open an image and then click on Control + 0 (zero). This would enlarge the image to the working area. Also, it would do the same thing if I double clicked on the little hand on the toolbar on left side of screen. For some reason, this stopped working. How do I get this back?
I have both PSE 10 and 7 on 2 computers.
I have an alignment I need to edit that has a reverse curve. The first curve was made with the "Floating Curve (from entity, radius, through point)" and the second with "Free Curve Fillet (between two entities, radius)"
When I delete one or both curves i lose all the superelevation data beyond the editing location due to the temporary spit in the alignment. The superelevation data is all manual. This is a trail and the super is based on drainage not curves.
how to edit the alignment with a temporary split and not lose the superelevation data? I have not found a way yet to remove the reverse curves and not have a temporary gap.
I was under the impression that editing in PS from LR4 meant my original in LR4 was safe (ie: that after editing in PS, both the PS editied photo and the LR4 original would be side by side when LR4 was opened up)
However, my first foray into PS was earlier today, when I double-processed an image as instructed by Scott Kelby's book (the Adobe Photoshop CS6 book - page 52). The book covers PS (not Lightroom) and camera raw, but I thought that anything edited in PS and/or camera raw would leave my original untouched. Following Scott Kelby's instructions, I did some editing in LR4, then opened in PS as a smart object, then opened a 'New Smart Object via Copy' which I did further edits on, but this time in Camera Raw.
I now had 2 versions of the photo in PS. I then did a layer mask for the foreground object, and darkened the background of the sky etc behind it, so a sort of HDR with the 2 photos. I then followed his instructions to 'Flatten Image', and then to do a levels adjustment to brighten image.
Still following the instructions, to make the image more vibrant, I went to Mode, Lab Color, Apply Image. I chose the 'a' chanel, blending mode, then switched back to RGB Color
It didn't actually say to save file, but I just did a 'File Save in PS. The only photo in LR4 was now the PS edited one. I went to before/after comparison, but just had the finished photo with Lab Color adjustments as after photo, and before photo was the combined 2 photos after editing / layer masking, but no sign of my original.
I have been reading that you should 'copy' the original in PS, but have also read that this is not necessary if you have Lightroom, So I'm confused by this. This was the first time the book touched on photoshop, so I'm surprised there was no mentioned about saving the file. I now have about 4 photoshop books, and they all talk of camera raw workflow only
How can I have PS Elements 10 accepting the -.raf image files from my Fujifilm X10 camera? I guess there is an update for it somewhere but I cannot find it.
View 2 Replies View RelatedHow do I edit a color image to print well in both color and b&w printing?
View 2 Replies View RelatedI found this error a bit strange, my colleague it trying to save a file and this error keeps on coming out (see attachments). When we try to save it, it only saves as a temp file. When we try to open up the temp file and try to save it, it still doesn't allow us to do. Also, when we cancel the save, the original file will be gone and he will lost all of his data. Below are the specs of the computer and version of the AutoCAD.
Computer: DELL Precision T5500
OS: Windows 7 Ult
AutoCAD Version: 2011
Also, we're using ProSteel Series 3 as well. We tried saving the file using ProSteel and just AutoCAD but it didn't do the trick. I've tried some options (listed below) that might get it to work but still no luck.
1. Restart the computer.
2. Repair / Reinstall AutoCAD.
3. Give permission to the folder (read from the forum).
I record video tutorials about Photoshop (so, screen captures) and edit/combine the clips inside Photoshop CS6 in Win 7/64; Photoshop's new video talent is nice. I record 852x480px at 15 fps with FastStone Capture and save in WMV. I want to show the finished video tutorial on Youtube. There are several things baffling me when editing video in Photoshop CS6.
My original records (according to MediaInfo):
Software: FastStone Capture
Overall bit rate mode : Variable
[code]....
The result looks very nice when i play it locally in VLC. It looks like the original WMV. But: When i upload the Photoshop-version to YouTube, the video looks very badly "upsampled" and blurred. It looks much worse than the uploaded WMV original. If you like, you can compare the two videos from the same source online:
Uploaded WMV clip, looking good (set player to 480 p): URL....
Rendered in Photoshop CS6, looking bad (set player to 480 p): URL.....I do like the resolution of 852x480 and would like to keep it. If not possible, i have to record tutorials in 1280x720, even though icons and menus look too small. So far i have not tested it.
I searched my folder C:Program Files (x86)Common FilesAdobedynamiclinkmediaserver1.0. There is a lot in it which i don't understand, but some file names include "MPEG", "AVI", "Adobe QT Server" etc. I think there is no Quicktime installed on my machine; i try to avoid it as it does many different things to the system and is obnoxious.
My questions:
- When aiming for a YouTube cast, could i stay with 852x480 (at 15 fps), or doesn't it make sense? (I like that size.) If 852x480 is not ok, what is the lowest resolution for getting good looking presentations on Youtube?
- Why does the Adobe Media Encoder in my Photoshop CS6 only offer the formats H.264 and DPX? Can i get more? (Free, pay.)
- Do i need to install Quicktime? How could i do this with less intrusive QT behaviour?
- Should i record more fps in FastStone Capture? (I don't find more fps necessary when looking at the original and when looking at the uploaded *original*.)
I would like to save a downloaded webpage (html file) as a jpeg so that I can edit it in photoshop elements. How do I do that?
View 5 Replies View RelatedI took this rig shot of my car:
where the suction cups and bar was still. Does anyone have any tricks or tips for getting rid of the rig in the shot? I've been using the clone stamp tool, along with the vanishing point tool.
I am using Photoshop Elements 11, using WIndows 7 Operating System. I have a new camera Canon Rebel T5i, and having problem viewing images in raw format (cr2).Message in PE11, states, "Camera model not supported by installed version of Camera raw."
Canon software views images. Suspect my minimum camera raw plug in version does not support this new camera..I am unable to locate in the software any menu item that allows me to view the camera raw plug in version.
Whenever I try to edit an image with Bridge I get a message saying: "Camera Raw editing is not enabled. Camera Raw requires that a qualifying product has been launched at least once to enable this feature"
View 1 Replies View RelatedSo just a few questions here, I have a process where I go through my RAW D800 photos and do general touch-ups in camera, but have been wanting to do skin touch-ups in photoshop. My problem lies in the photo sizes (45mb per RAW photo to begin with). Is there any sort of way to make a workflow that would allow me to retain the raw photos and seperate photoshop files in a convenient manner?
I'm simply looking to avoid having 2GB folder for just a few images, and wondering if there's maybe some appropriate file formats for that.
After editing a photo in an external application, only the original raw file can be seen. The edited photo is hidden, even when searched for by name.
I have been reduced to the following workaround, which has the drawback of deleting all the original raw (.cr2) edits: Edit the photo; edit in external application; save and close. Back in lightroom, delete the raw file (from lightroom only); then close lightroom, reopen it and then at last I can see my edited file. Then I have to re-import the raw file and of course the edits have disappeared. But at least the final result can be seen.
The photos are supposed to be in a stack, but there appears to be a bug in this function because you can only ever see the raw file.
I have Camera Raw 5.0 through Bridge CS4 and I shoot photos on my Nikon D40X in JPEG. Should I NOT be using Camera Raw to edit my non-RAW photos? Is it degrading my images? I noticed when I did some editing and saved the photo, the new photo size was about 25% of the original JPEG size.
View 5 Replies View Related