Photoshop Elements :: How To Retain The Original Date After Editing
May 17, 2013
I am using PSE 11 on a MacBook Pro, OS X (10.3). I have a lot of old pictures to edit, and they are in date order, which is how I want them.
However, when I edit a picture and save it, it moves it to the bottom, with today's date instead of the original date. I have them set to save with the original as a version set.
Is there any way to retain the orignal dates, short of having to go in and reset the date on every picture after I save it? I really want them to be in date order under their original dates.
BTW, I used earlier versions that were Windows-based, and this didn't happen. When I saved them, the version sets stayed where they were.
View 1 Replies
ADVERTISEMENT
Aug 14, 2013
After installing Adobe Photoshop Elements 11, I imported all my photos from my files on my computer. Many of the photos were upside down and needed to be rotated. When I rotated them, they were moved to the current date (when edited). How can I keep them in their original sequence (date)?
View 1 Replies
View Related
Aug 14, 2013
When I installed Adobe Photoshop Elements 11, I imported all my photes from files and folders. Many of the photos were upsided down. When I rotated them, they moved to the curent date. How can I keep them in the original dated sequence?
View 1 Replies
View Related
May 28, 2013
There seem to be a problem with PSE10 and PSE11 on my computer when loading image files digitized on my film scanner. When loaded into the editor the image file immediate takes today’s date and time, and thus changes place on the timeline. However, sometimes the original image file date remains intact, for no obvious reason. I find this very frustrating.
My setup is an HP computer running Windows7 Ultimate 64 bit, with i7 processor and 12GB memory. My film scanner is a Minolta Dimage Elite II working with a Windows XP-based computer, and data are transferred using memory stick.
It might be mentioned that I have made tests with a fixed set of image files on several computers running WindowsXP 32 bit, and several versions of PSE , including PSE10, without seeing this problem.
View 5 Replies
View Related
Nov 17, 2013
I am editing .CR2 files using camera raw, and when I save the edited version as a .tiff, my changes are being applied to my original .CR2 as well. I am losing the original .CR2 files.
View 3 Replies
View Related
Sep 25, 2013
Can I edit a video clip in PRE 12 and save the clip in place of the original clip, with the same file name, without going through the Project" program?
View 3 Replies
View Related
Feb 3, 2012
All I am trying to do is cut out small portions of a video just to get rid of the parts I don't want. However, when I use the multi-trim feature, it strips the original audio. I know it does this so you can create your own video and then overlay your own audio. However, all I want to do is just cut out a few portions of the video while retaining the original audio minus the parts I cut out (i.e. I don't want to have to overlay any audio for this project, I just want a simple way to cut a few parts out and be done).
View 8 Replies
View Related
Sep 6, 2011
I wanted to join 2 lines together (i.e. end up with a single line). I know that you can join lines by selecting both then using any of the shape / line / brush tools to drag one node from line A over to the a node on line B (you get a little + symbol next to the mouse cursor once the lines can join).
This is fine is you want the final line shape to differ from the original 2, but what if you want to join 2 lines and retain the original paths?
I can do it by postioning the target nodes on eash of the lines almost but not quite touching then using the above technique but its a bit awkward and I suspect this isn't the best way to go about it.
View 9 Replies
View Related
Nov 27, 2012
I have included both a text and a date as part of the photo caption on each of my photos. When I have attempted to search for a specific date or year, however, nothing comes up. For example, if I search for my photo on "Fido 1985", I can find Fido, but if I simply enter "1985", I get nothing.
View 2 Replies
View Related
Oct 1, 2012
I've got some 500 photos in a folder which were imported on two different dates. I've created a new album on the right hand side under "Organize" and just the photos I want are in there. When I look at the folder on the right, all the pictures are there. But I can't call up just that folder; instead what I get on my screen is all 2500 photos in all my photo albums! Not what I want! What I want to get is all the photos in the order in which they were taken on the actual day as all 500 photos were taken at the same day. And I want to be able to view just the 500 photos in that folder by the time those pictures were taken. But, when I imported the second batch of photos it showed the date the file was created rather than the date the photo was taken so, basically, I've got one batch of photos showing the date they were taken (which I downloaded via a link a few days later), and one showing the date they were copied!
View 3 Replies
View Related
Dec 2, 2013
How do I import photos to elements and have it use the photo date, not the import date?
View 3 Replies
View Related
Mar 13, 2014
I recently set up Elements 12. Prior to this I used elements 11. In that catalog I have more photos that I don't want. So I decided to export the ones I want then import into PSE 12. As I do this many of the dates on the pictures change from the date taken to the current date. I have tried several different ways and can't stop the dates changing. I am putting them into mobile albums in PSE 12 if that makes a difference.
View 2 Replies
View Related
Feb 1, 2014
I seem to have a big (and very weird) problem with dates in Lightroom. This relates - for the moment at least - to images dating back ten years, to when I had my first digital camera, a Nikon D100.
My belief is that the photo in question, one of many, was taken at around 2pm on the afternoon of 17th April 2004. Note the following from the image (EXIF data):
- The "date/time original" shows 17/04/2002 13:58:48
- The "date/time digitized" shows 17/04/2004 23:15:29
- The "date/time" shows 17/04/2004 23:24:17
The same image in Windows explorer (see second image) shows:
> Date 17/04/2004 23:15
> Date Taken 17/04/2004 23:15
> Date Imported 17/04/2004 22:24
Given the subject matter of the image, it is 100% certain this image was in fact taken in April 2004.
How can it be, then, that the "original" shows a date two years earlier? Why would Lightroom use this field (the ONLY one showing 2002 when every other shows 2004)? And why does Explorer correctly show the date but Lightroom does not - surely if anything one might expect the opposite?
This is urgently needed to be resolved as I am making a photo book for my wife's 40th and, as it turns out, I am putting all the photos in all the wrong years!
View 3 Replies
View Related
Jan 26, 2012
I've been using LR3 for a year or so and have an imported folder with over 7000 images in it all from 2009. The set was originally created in Elements organsier 8.0 probably in 2009?
I have noticed that somewhere along the line 658 of them have had the original capture time overwritten to a single point in time 15th Nov.
They are all JPEG (before I had a RAW camera) and the changes are embedded in the jpg.
This folder has been processed with a few tags and some editing and filtered out rejects.
I would like to get the original time stamp back as the images do not flow with the other 2000+ from the same couple of months.
I do have copies of the originals with correct time stamps - but no tags etc as they were created at time of import.
I have tried copying one of the originals from backup and overwriting the 'wrong date' file using windows and then importing the metadata from file and this rectifies the date - but loses keywords etc
If I use LR to import from back up - firstly it does not see the backup as a duplicate - despite file name being the same - I guess date throws it?? so I end up with duplicates - one on each date ; correct + incorrect
My question is: Is there a way to re-read the original time metadata back into the file/catalog and retain the keyword tags (like a selective merge)?
It would be great to have a solution rather than manually having to identify the incorrect files and copying, Or doing a mass read of original metadata and losing any keywords.
View 4 Replies
View Related
Apr 11, 2012
we have on company drawing title block the date created field. . . . but when the file is being transfered and "save" it shows the present day of saving. . . is there any lisp that when used, it will show the original date its created. .?
View 3 Replies
View Related
Jan 13, 2014
When you select the option to apply any changes & overwrite your original photo does the program attempt to try to a default setting to keep the picture approximately the same size as it was before? (assuming that you haven't cropped it) If it doesn't default to a size automatically can is there an option to do so?
View 4 Replies
View Related
Sep 17, 2013
In Photoshop, how do I keep the shot/creation date after editing/adjusting a photograph in order to keep hundreds of images in a chronological order? I am combining files with a second shooter on an event an the timeline is essential.
View 5 Replies
View Related
Jul 28, 2013
I was under the impression that editing in PS from LR4 meant my original in LR4 was safe (ie: that after editing in PS, both the PS editied photo and the LR4 original would be side by side when LR4 was opened up)
However, my first foray into PS was earlier today, when I double-processed an image as instructed by Scott Kelby's book (the Adobe Photoshop CS6 book - page 52). The book covers PS (not Lightroom) and camera raw, but I thought that anything edited in PS and/or camera raw would leave my original untouched. Following Scott Kelby's instructions, I did some editing in LR4, then opened in PS as a smart object, then opened a 'New Smart Object via Copy' which I did further edits on, but this time in Camera Raw.
I now had 2 versions of the photo in PS. I then did a layer mask for the foreground object, and darkened the background of the sky etc behind it, so a sort of HDR with the 2 photos. I then followed his instructions to 'Flatten Image', and then to do a levels adjustment to brighten image.
Still following the instructions, to make the image more vibrant, I went to Mode, Lab Color, Apply Image. I chose the 'a' chanel, blending mode, then switched back to RGB Color
It didn't actually say to save file, but I just did a 'File Save in PS. The only photo in LR4 was now the PS edited one. I went to before/after comparison, but just had the finished photo with Lab Color adjustments as after photo, and before photo was the combined 2 photos after editing / layer masking, but no sign of my original.
I have been reading that you should 'copy' the original in PS, but have also read that this is not necessary if you have Lightroom, So I'm confused by this. This was the first time the book touched on photoshop, so I'm surprised there was no mentioned about saving the file. I now have about 4 photoshop books, and they all talk of camera raw workflow only
View 1 Replies
View Related
Dec 19, 2012
I have a style/font combo that really i like to use for text.
My goal is to use it regularly in the future on/with new backgrounds.
Currently I have the text on a background.
All I want to do is (retaining the text) replace it with another background.
View 5 Replies
View Related
Mar 27, 2013
I need to convert a large number of images to png and need to later sort them by the original date created. "Save as" results in the current date/time as the date created. CS5.
View 4 Replies
View Related
Jul 14, 2011
I use your program & believe that it is the best photo editing application year-to-date beside Adobe Photoshop & it's FREE.
Since the Q2 your website had stated the version 2.7.2 had been released @ 04/15/2011, however I can't find anywhere @ your website to download this recent version & continue to take advantage of it.
URL as to where to download it version 2.7.2?
View 1 Replies
View Related
Dec 26, 2012
How do I enlarge a small jpeg of a map and retain the clarity?
View 3 Replies
View Related
Mar 12, 2013
I record video tutorials about Photoshop (so, screen captures) and edit/combine the clips inside Photoshop CS6 in Win 7/64; Photoshop's new video talent is nice. I record 852x480px at 15 fps with FastStone Capture and save in WMV. I want to show the finished video tutorial on Youtube. There are several things baffling me when editing video in Photoshop CS6.
My original records (according to MediaInfo):
Software: FastStone Capture
Overall bit rate mode : Variable
[code]....
The result looks very nice when i play it locally in VLC. It looks like the original WMV. But: When i upload the Photoshop-version to YouTube, the video looks very badly "upsampled" and blurred. It looks much worse than the uploaded WMV original. If you like, you can compare the two videos from the same source online:
Uploaded WMV clip, looking good (set player to 480 p): URL....
Rendered in Photoshop CS6, looking bad (set player to 480 p): URL.....I do like the resolution of 852x480 and would like to keep it. If not possible, i have to record tutorials in 1280x720, even though icons and menus look too small. So far i have not tested it.
I searched my folder C:Program Files (x86)Common FilesAdobedynamiclinkmediaserver1.0. There is a lot in it which i don't understand, but some file names include "MPEG", "AVI", "Adobe QT Server" etc. I think there is no Quicktime installed on my machine; i try to avoid it as it does many different things to the system and is obnoxious.
My questions:
- When aiming for a YouTube cast, could i stay with 852x480 (at 15 fps), or doesn't it make sense? (I like that size.) If 852x480 is not ok, what is the lowest resolution for getting good looking presentations on Youtube?
- Why does the Adobe Media Encoder in my Photoshop CS6 only offer the formats H.264 and DPX? Can i get more? (Free, pay.)
- Do i need to install Quicktime? How could i do this with less intrusive QT behaviour?
- Should i record more fps in FastStone Capture? (I don't find more fps necessary when looking at the original and when looking at the uploaded *original*.)
View 6 Replies
View Related
Feb 8, 2013
I have been unable to open multiple images and retain them on separate layers
View 10 Replies
View Related
Apr 14, 2013
How can one convert a picture to 1080 pixels in height at 72 dpi and retain the aspect ratio?
View 1 Replies
View Related
Nov 27, 2011
After editing a photo in an external application, only the original raw file can be seen. The edited photo is hidden, even when searched for by name.
I have been reduced to the following workaround, which has the drawback of deleting all the original raw (.cr2) edits: Edit the photo; edit in external application; save and close. Back in lightroom, delete the raw file (from lightroom only); then close lightroom, reopen it and then at last I can see my edited file. Then I have to re-import the raw file and of course the edits have disappeared. But at least the final result can be seen.
The photos are supposed to be in a stack, but there appears to be a bug in this function because you can only ever see the raw file.
View 7 Replies
View Related
Mar 3, 2013
I need to print a large number of photos with the creation date appearing on the photo. I would like to avoid having to manually add the date on each photo. Is there some setting or some way to do this automatically ? I am using Adobe Photoshop Elements version 11.
View 3 Replies
View Related
Mar 21, 2014
I can not change date and time
View 2 Replies
View Related
Jan 5, 2014
I'm now trying Elements 12 (free trial) to see if the interface for subsetting the set of images by date is any easier than PSE 10, and I find it even harder to use - in fact, it does not seem to work at all. I select Find -> By Details (Metadata) and select by Catalog Date after 12/29/13 AND before 12/31/13 (see screenshot)
which results in no matches, even though I have a few dozen pictures with catalog date of 12/30/2013, such as this one, with the date highlighted:
I also turned on the Timeline, but it does not have the resolution to select specific dates
View 2 Replies
View Related
Jan 28, 2013
How do I add a date stamp to photos
View 1 Replies
View Related
Dec 31, 2012
I recently upgraded to PSE 11 from PSE 9. I actually did this by buying a new comptuer and putting PSE 11 on the new computer. I used the Windows File and settings transfer wizard to move all my files to the new comptuer. So inside MyPictures folders, they are in the same location as in the old comptuer. But when I soft by date order, it sorts by the date of the file (which seems to be random based on when windows copied the file to the new comptuer) instead of the created date.
Furthermore, on the old comptuer, in PSE9, i set the date and time of each picture so it would be right. This seemed to set the created date (which was missing for a lot of my scans or was the date of the scan) and made the PSE9 organizer sort them correctly. Seriously, are people expected to do that months of work again every time they move to a new computer? or am I suppose to have tell my wife, "deal with seeing your kid's pictures in random order -- Adobe thinks that is best."
Is there a way to set all the timestamps in windows to the created date of the picture in one swoop?
View 1 Replies
View Related
