When I apply an Vray material to my linked Revit file the material appears extremely large and I cant fix it either by playing around with the scaling of the material or UVW-mapping. I have made sure that both my Revit model and 3DS max are both set to mm.
The scale of the material applied in Revit has the right proportions etc. Its just when I apply a new Vray material it goes wrong.
Is it possible to give me a tip how to model or simulate stem in 3ds max and Vray, is a cover for a large house?
I am sending a reference image.
I have a large model that I'm trying to export to .dae to use in Torque3D. The problem is when I export it, I loose all of the textures. I read that in order to export the model properly I have to change the map# of the textures to be within a certain range?
I tried just exporting a single object from the model but when I export I receive warnings/errors saying that It was not able to apply the texture map# 20 because it is not supported outside of 3ds max..
i downloaded a 3ds max file from the internet and i would like to copy an object inside it to my own drawing. my drawing is using mental ray renderer while the object from the downloaded file is using vray materials. is there any way to convert or else to render the object so i can render it in mental ray?
View 1 Replies View RelatedHow to export a 3D model from Revit 2012 into 3D Max for rendering?
View 3 Replies View RelatedPattern Drawing you can change it to a Notepad file pattern to become a model.Where can I get more patterns to model or to get access.
View 1 Replies View RelatedThe new Enhanced Menus feature is ace and a welcome thing BUT can you add Vray lights and cameras to it? Its oh-so-close to replacing the normal command panel and toolbar. Add Vray
ANNOYED BECAUSE ALL MY OLD AREA SETTINGS, SIGNATURE, FORUM POSTS etc ARE ALL *GONE*. AND NOW I HAVE DUMB LONG USERNAME INSTEAD OF MY OLD ONE.
Recreating this in Vray? I've struggled with it which may be due to my lack of experience with Vray,
Diffuse:
Reflection:
SSS:
Combined:
I'm not worried about the foam or the atmospherics as I already have some working systems for that. I just can't wrap my head around the shader.
Here is where I am at so far (rough comp test):
how to switch materials with VRay. I find it odd that there is absolutely nothing. I need to have a texture map on a plane and then have it dissolve into another one. Is there a way to do this? I tried a VRayBlend material and that doesn't seem to allow me to have one or the other.
3ds Max Design (3D Studio thru Max 2014), ASUS P9X79 Motherboard,
Intel i7-3960x, Hydro H80 CPU Chiller, 32GB DDR3 Ram,
Quadro 4000 Display Adapter
I am a Maya user recently switched to 3DS so i dont have a grasp on the meat and bones of max yet with regards to deleting nodes from the scene etc and this may or may not be a simple fix. I have an animation where i have a 3d model from turbosquid which seems to have brought in VRay materials. Every time i open the file now i get prompted " Missing Dlls" then "FileName vrender90.dlr". This is not any major inconvenience, however it crashes a backburner render whenever i try it, which is.
How to totally rid my scene of Vray materials if at all possible? I have tried finding them in the material editor etc but i cant seem to get rid of them. I seen some tutorials on how to do this in earlier versions but it either didnt work or was different in 2013.
Im on 3DS Max Design 2013
I need to model a wavy wall in Revit. See attached.
Revit 2014
I have a multiple storey building that has been created in Revit 2012. The client would like a separate Revit model that only contains the information on one floor (Level 4), so that he can give this separate model to his tenant, to be used to do a renovation.
View 1 Replies View RelatedI am in the process of drawing up an existing building and firstly am setting up with the building mass. I have managed to get the main bodys of the building done and the main roof.The problem now is that when i switch too the east or west elevations to add mass for the roofs on the adjoining wings of the building it wont let me see the model lines when i draw them in the screen i just get an error message " None of the created elements are visible in Elevation: East View. You may want to check the active view, its Parameters, and Visibility settings. "I have my reference line set not far from the building and it seemed fine when i done the roof from the north and south views for the main building. I can see the model lines when i switch too 3D views but i cant create the mass from there.
View 4 Replies View RelatedI am trying to model a curved beam but I am having problems as it doesn't snap to the roof line I have already.
View 1 Replies View RelatedI'm trying to model a parametric simple unit in Revit. So, I decided t use the generic family template. I want to model a rectangular unit with exterior wooden wall and interior steel frame. I have three problems
1- I have imported structural column profile into the family, but my problem is that I cannot align the section to two reference line. For example, I want to align the top of the column to the top exterior wall, and align the left side of the column to the left exterior wall; but I can just assign of these sides.
2- I've imported structural framing family in my generic model, but I cannot assign a parameter to the length of the beam, and the length is constant, and I can change the length just in 3D view. Do you know how to assign a parameter to the length?
3-I couldn't use the predefined walls it the family, so, I used extrusion. But I couldn't use the Revit windows family on the extrusion walls. Is there any way to use the predefined wall systems in Revit to be able to use the windows families?
Here is the picture of my model:
I don't know all the possibility to model all 3d forms. Particulary, I have big problems to model 2 intersected caverns: I tried to model them with rhinoceros or other 3d software and then import the model into revit, but this cause some problems with the export to autocad (problems of visualization). I prefer modelling the intersected cavern directly into revit.
View 1 Replies View RelatedTrying to make a Custom Model Pattern - 8"x24". Listed below is the PAT file content. I tried it and I get the message "No "Model" type patterns found." What is the code in the PAT file.
View 7 Replies View RelatedCan a Model in place component be replaced with say a wall? If i have n extruded form can it be replaced with a family?
what's the best way to add material to a model in place component?
Has anyone had any luck exporting a Revit 3D model directly to Acrobat 3D? I can't seem to get it to work.I can export to AutoCAD and then to Acrobat 3D, but I lose all embedded Revit information.
View 2 Replies View RelatedI use energy analysis module of Revit 2014. Energy report give me fuel consumption I need to know how to cancel fuel from model as we don't use fuel for cooling or heating. Also, how can I change the cost of electricity. Ant data regarding energy analysis report.
View 1 Replies View Relatedi had transferred the Revit MEP model to 3d max with FBX file. However, i found that i could not select a single part of duct, it seleced all the components.
Ssee attachments
How come pieces of a model disappear when I try to edit the model?As you can see here there is a base to this counter.When I edit the counter in place, because it was modeled in place the base disappears? What's going on?
View 1 Replies View RelatedHow I can successfully import a 3d .dwg model into Revit so I can cut through it in plan and section? I built the model in sketchup, exported it as a .dwg, then impoorted this .dwg into a new Revit family. I then loaded this family into the revit file I'm working in. Its cuts through the model on basement and ground floor plans but not on 2nd or attic. For the 2nd or attic it just shows me the roof of my model.
View 9 Replies View RelatedWe have been using AutoCAD drawings for our facility plans. We are switching to revit and we like to convert everything to Revit models. Everything is good so far. The problem is we have no clue to have only one Revit model in out facility network and use that model for all ongoing projects.
View 5 Replies View RelatedI am having trouble setting materials for a kitchen countertop that i created by modeling in place. I think that it has something to do with the installation, and am wondering how to fix it. When I am editing the model, in the properties pallete I choose the browse button next to materials and this is what comes up:
How do I set up the materials so that they are available to choose from? I have no other materials issues with walls, etc.
There are other people working on details that I need to do callouts for on my plans in Revit-how do I manually manipulate the callout tag without it being associated with anything?
View 9 Replies View RelatedI recently converted from Sketchup 8 to 3DS and I've been trying to render some scenes with Vray but they all come out super grainy, like the rendering has a layer of noise on top of it. I have a lot of experience with Vray for Sketchhup and have never encountered this. I attached an example.
View 3 Replies View RelatedWhen I apply an Vray material to my linked Revit file the material appears extremely large and I cant fix it either by playing around with the scaling of the material or UVW-mapping. I have made sure that both my Revit model and 3DS max are both set to mm.
The scale of the material applied in Revit has the right proportions etc. Its just when I apply a new Vray material it goes wrong.
I don't know what is happening, everything is ok except the floor has this "pink noise" parts, I only have one vray light outside the window and several (less powerful lights) above the board.
View 7 Replies View RelatedIm using Autocad 2012 Full and the renders are pretty good, but Im looking for more realism and without going on to MAX. I've been looking on the Chaos site for Vray and sketchup rendering. The finished out-come seems to be stunning so My thoughts were model in CAD, export to Sketchup and render in the vray plugin in sketchup. Is this possible?
I have looked on the Chaos gallery at some of the models rendered in Vray from Sketchup and found this is what Im after. .....
[URL].......
apparently this is a sketchup model and vray render.
A customer is trying to export a model for use in Revit. When he goes to the Environments tab -> BIM Exchange and the dialog opens... He has no option for RFA files... Only ADSK. Not sure what is going on.
View 3 Replies View Related