How come pieces of a model disappear when I try to edit the model?As you can see here there is a base to this counter.When I edit the counter in place, because it was modeled in place the base disappears? What's going on?
Is there any way to separate a sweep into all its adjoining pieces? I really want to get all the pieces and their miter angles in order to dimension properly, in order to make an assemble manual.
Basically, when I Insert Edge Loops this morning, all of a sudden part of my object disappear. how to use the Hypergraph or how to get rid of whatever is causing this glitch.
What i have is a low polymodel that's quite small in scale, i'm modelling around a higher poly model, when i zoom in, the viewport clipping kicks in and parts of the model disappear, so i cant work on the small details. What i need to do is scale up both my low poly and high poly, work on the small details and scale it back down.
In maya there are multiple solutions to this; The first and most obvious would be to increase the near clip in the camera attributes.
The second would be to freeze transformations on the low and high poly, scale up the model, work on it and then scale it back to the value of 1.
The third would be to put both the low and high poly models into a group, scale up the group, work on the model, return the group back to its default size and ungrouping. Personally i would use this method to preserve the original scale values on the low and high poly models.
Is there a way of doing any of the above in 3ds max?
I drew some internal walls before adding a floor slab. After adding the floor slab the walls disappeared in plan. I can see them in 3D, in the correct place, but not in plan.
The floor slab is in the right position. To fix the problem I redrew them all, but why did they disappear and how do I prevent it from happening again?
I click on my wall, drag the end of a witness line to a new point and the whole thing disappears, preventing me from changing the value of the witness line.I'd like to be able to add a witness line.
I'm have an issue where my windows disappear behind my tree outline when I print. The trees are default revit deciduous trees. I have overridden element to make it 100% Transparent. Also I have tried to override it in visibility Graphics. [URL] ... Is this a problem with Revit 2014. This happens with both our paper printer, our plotter and adobe pdf so we know that its not a specific printer issue. Also it only happens in hidden line mode when changed to realistic mode, the windows print.
I have attached views of a printed to pdf view with the windows missing and a revit view of the same drawing before sent to the printer. As you can see it looks correct in my revit view.
a user i work with reports that during some commands (not the same) on some jobs his contextual menu dispears.
I've already run the recommended "UIreset" process a few timesI've updated his graphics card drivers to the certified drivers for that card.he has a robust windows 7 64 bit setup. His latest example was in the DI command the context menu dispeared that lets him controls linear/alinghed etc etc.
Certain exterior walls ghost out / disappear in plan when hosting a split face. This doesn't happen on all walls, and it suddenly appears on walls that were performing fine.
What Revit 2012 setting makes walls and floors disappear when rendering is selected?
I have a Revit 8.1 project that renderes the model just fine. When I import it into Revit 2010 it also remders the model but I have to reassign the custom finishes. But when I upgrade it to 2012 and render - the walls and floors are suddenly missing!
When I apply an Vray material to my linked Revit file the material appears extremely large and I cant fix it either by playing around with the scaling of the material or UVW-mapping. I have made sure that both my Revit model and 3DS max are both set to mm.
The scale of the material applied in Revit has the right proportions etc. Its just when I apply a new Vray material it goes wrong.
I have a multiple storey building that has been created in Revit 2012. The client would like a separate Revit model that only contains the information on one floor (Level 4), so that he can give this separate model to his tenant, to be used to do a renovation.
I am in the process of drawing up an existing building and firstly am setting up with the building mass. I have managed to get the main bodys of the building done and the main roof.The problem now is that when i switch too the east or west elevations to add mass for the roofs on the adjoining wings of the building it wont let me see the model lines when i draw them in the screen i just get an error message " None of the created elements are visible in Elevation: East View. You may want to check the active view, its Parameters, and Visibility settings. "I have my reference line set not far from the building and it seemed fine when i done the roof from the north and south views for the main building. I can see the model lines when i switch too 3D views but i cant create the mass from there.
I'm trying to model a parametric simple unit in Revit. So, I decided t use the generic family template. I want to model a rectangular unit with exterior wooden wall and interior steel frame. I have three problems
1- I have imported structural column profile into the family, but my problem is that I cannot align the section to two reference line. For example, I want to align the top of the column to the top exterior wall, and align the left side of the column to the left exterior wall; but I can just assign of these sides.
2- I've imported structural framing family in my generic model, but I cannot assign a parameter to the length of the beam, and the length is constant, and I can change the length just in 3D view. Do you know how to assign a parameter to the length?
3-I couldn't use the predefined walls it the family, so, I used extrusion. But I couldn't use the Revit windows family on the extrusion walls. Is there any way to use the predefined wall systems in Revit to be able to use the windows families?
I don't know all the possibility to model all 3d forms. Particulary, I have big problems to model 2 intersected caverns: I tried to model them with rhinoceros or other 3d software and then import the model into revit, but this cause some problems with the export to autocad (problems of visualization). I prefer modelling the intersected cavern directly into revit.
Trying to make a Custom Model Pattern - 8"x24". Listed below is the PAT file content. I tried it and I get the message "No "Model" type patterns found." What is the code in the PAT file.
Has anyone had any luck exporting a Revit 3D model directly to Acrobat 3D? I can't seem to get it to work.I can export to AutoCAD and then to Acrobat 3D, but I lose all embedded Revit information.
I use energy analysis module of Revit 2014. Energy report give me fuel consumption I need to know how to cancel fuel from model as we don't use fuel for cooling or heating. Also, how can I change the cost of electricity. Ant data regarding energy analysis report.
i had transferred the Revit MEP model to 3d max with FBX file. However, i found that i could not select a single part of duct, it seleced all the components.
How I can successfully import a 3d .dwg model into Revit so I can cut through it in plan and section? I built the model in sketchup, exported it as a .dwg, then impoorted this .dwg into a new Revit family. I then loaded this family into the revit file I'm working in. Its cuts through the model on basement and ground floor plans but not on 2nd or attic. For the 2nd or attic it just shows me the roof of my model.
We have been using AutoCAD drawings for our facility plans. We are switching to revit and we like to convert everything to Revit models. Everything is good so far. The problem is we have no clue to have only one Revit model in out facility network and use that model for all ongoing projects.
I am having trouble setting materials for a kitchen countertop that i created by modeling in place. I think that it has something to do with the installation, and am wondering how to fix it. When I am editing the model, in the properties pallete I choose the browse button next to materials and this is what comes up:
How do I set up the materials so that they are available to choose from? I have no other materials issues with walls, etc.
There are other people working on details that I need to do callouts for on my plans in Revit-how do I manually manipulate the callout tag without it being associated with anything?