Photoshop :: Apply Same Local Adaptation HDR Toning Results To Multiple Images?
Oct 25, 2011
I have a set of images in 32 bit .hdr format, which I would like to turn into 8 bit png files. Specifically, they are 6 sides of a cubemap, which join together seamlessly, and still need to do so after the conversion.
I've played around with the options in the HDR toning dialogue and have a setup I really like the look of, based around the 'local adaptation' method. The trouble is, if I apply those settings to each of the 6 images individually, they are no longer seamless (some have higher/lower contrast and brightness etc), presumably because these settings are 'relative to' the image being processed.
how can I apply the same kind of operations to each of these images (so they remain seamless), mimicking what the 'local adaptation' method is doing?
The specific settings I have changed in the dialogue are the edge glow radius and strength, the 'detail', and the colour vibrance and saturation.
View 2 Replies
ADVERTISEMENT
Aug 21, 2013
Its a small school project which I have chosen and cant really find a way to do it. What I want to achieve? I have an image and I want to have like 50 variations of it.
What I did? I loaded up an image, recorded an action which applies the filter called "Wave", the the wave dialog box I selected Minimum and Maximum range for values.
Problem I am having:
I made 50 copies of the same image, and then I applied the action via batch processing to these 50 images. However, it applies the exact same settings/values which I recorded. It doesn't really use the range i.e maximum and minimum values I selected in the wave dialog box. It looks like when I closed the wave dialog box, the action creates a new value called "Random seed" when recording and perhaps this random seed number tells Photoshop what to choose from the min and max range supplied by the user.
So is there any way so that when I run the action, it will pick up a new random value from the supplied min and max range?
View 3 Replies
View Related
Dec 13, 2011
I have a folder full of icons (.png) that I have created for an application at work but they now need greyed out versions for use as disabled buttons. There are 71 icons and it will be time consuming to do it manually so I wanted to see if there was a way to turn all images to a grey state in one go?
View 1 Replies
View Related
Nov 21, 2012
Is there an easy way to apply multiple effects on a set of images or individual images, similiar to something like a preset in LightRoom.
For example, if I run the following effects I have to apply it to each image one effect at a time and repeat for each image that I want the exact same effects applied but would prefer to do it all in one go
Blur/(GPU) Gaussian Blur
Noise/Reduce Noise
Photo/Sharpen+
I use these to clean up the moire from scans and reduce dust/dirt then apply a mild sharpen effect to bring back the now softenend image back up slightly. Being able to have presets would be a real bonus for quick clean ups, of digital camera images or camera phone images
I found it by spending a bit more time looking through the menus, under the Effect menu and the Advanced tab and creating a custom effects script ......
But now would like to see if I can have a list of presets instead of having to load them through the script engine one at a time, maybe an option under the 'Effects/Presets' menu option listing all the scripts that are currently saved.
View 7 Replies
View Related
Jan 18, 2013
Is there a way to apply a slight boost in exposure to multiple images that have different exposure settings?
View 2 Replies
View Related
Sep 11, 2012
1) Take a color image and apply a color-shift local adjustment to a portion of the image.
2) Convert the image to B&W.
Result -- The main image is converted to B&W, but the local adjustment doesn't change, i.e. it's still colored. Here's a trivial (and not-realistic) example of what happens:
My goal is to adjust the colors and the apply the B&W conversion to the entire processed image, not just the original piece. Is there a way to do this? I feel like I'm missing something small and easy.
View 5 Replies
View Related
Jun 14, 2013
I was wondering if there's a way to apply local changes to a picture by including the part I need to be changed in a square (like when you crop it). Without using the graduated filter.
View 1 Replies
View Related
Jan 28, 2009
I have a PDF target job containing a few hundred patches specified in the Lab colour space. I can import this into Photoshop specifying the 'Lab Color' mode and when I look at the Lab values of each patch they are exactly as the PDF says.
The problem comes when I choose to convert the image to a profile (any profile) because Photoshop appears to do no chromatic adaptation during the conversion. It is as though D50 is assumed, since that is the ICC standard. I can change X and Z values of the white point in the PDF to any numbers and the conversion is always unchanged. If the Y value is changed to any number other than 1, the Lab elements are not rendered in Photoshop.
Is there any way I persuade Photoshop to honour the chromatic adaptation implied by non-D50 white points? I am using CS2 on Windows.
View 2 Replies
View Related
May 21, 2012
I do not get the same results with grayscale images reproduced as halftones. While they are not true grayscale prints, the inkjet prints of grayscale images that I print from Photoshop always look good.
However when I see the final publication 20-30% of the halftone images will look dull. Is there some way to better visualize with Photoshop what a grayscale image will look like when printed in halftone?
View 1 Replies
View Related
Sep 12, 2013
We have just installed a new server at work. We have transfered all of our Revit files to the server and resaved them as central files. We cannot seem to create more than one local file per Revit file even though we have already set up the file as a worksharing file. The one that sets up the Revit file is the only one that can create the local file. For the other user the create local file tab is grayed out.
View 4 Replies
View Related
Jun 21, 2012
I am using Civil 3D 2013, Windows 7 x64.
Intellizoom does not seem to work properly on certain drawings, where if I undo... nothing happens. Rather, it tries to undo *each* click of my scroll wheel, without doing anything. This results in dozens and hundreds of undo commands, most of which are totally useless. This of course breaks my undo command, rendering it almost pointless. If I make a change, zoom out and decide that the change is not needed, I cannot easily undo; I have to undo something like 50 "commands" that do nothing, before I get to the "real" undo that I wanted to undo in the first place.
I understand there is the "Combine zoom and pan commands"; this is checked off. It does not seem to do anything. How do I make my undo command useful again? As a keyboard user, I want to use ctrl-z for my undos. I do not want to go to the undo button, pull down the menu, and search trhough the 50 commands to find the correct command to undo to, especially since I never had this problem before in previous versions of Civil 3D.
Some additional information:
1. I can open some other drawings that get the correct undo/zoom behaviour.
2. I can open the drawing I have problems with using a previous version of Civil 3d (2012), and get the correct undo/zoom behaviour.
View 9 Replies
View Related
Nov 16, 2011
Using 3.2 lightroom, when I zoom in on a tif image it is fuzzy. If I click on the next image over, then click back it reloads and is sharp.Is there a way to force a reload without clicking to another image and then back.When doing same on a raw file (NEF in my case) I do not have this problem.
View 1 Replies
View Related
Feb 16, 2012
When importing objects into Inventor, all surface objects are being joined together into 1 composite surface. What I need is multiple surfaces, or seperate surface/composite objects.
Capture 1
Shows 3 solids imported from Rhino
Each solid is a sepreate solid
Capture 2
Shows 2 solids and 1 surface composite imported from Rhino
Capture 3
Shows 1 solid and 1 surface composite imported from Rhino
1. Why is Inventor creating 1 composite from multiple non intersecting surfaces?
2. How can I avoid this from happening?
View 4 Replies
View Related
Sep 21, 2013
After the OS X 10.8.5 update on my current generation 27' iMac moving 1:1 images results in very low resolution for those areas I am moving to with as long as a two second delay before the image snaps back into full resolution. Not only that but when it snaps back into full resolution you see a shift in alignment and a snapping into place with the nearby area that was already in full resolution. This is awful and is occuring with Lightroom 5 and 5.2.
My iMacs specs are the current generation 27" iMac, i7 3.4 Ghz, 32GB RAM, and the NVIDIA GeForce GTX 680MX 2GB running OS X 10.8.5.
I did not have this issue with OS X 10.8.3.
View 1 Replies
View Related
Jun 12, 2013
Mac OS 10.6
Illustrator CS6
Illustrator CS6 hangs (spinning beach ball) when saving files to the computer's local HD while having multiple server share points mounted.
I am NOT opening or saving the file to or from a server. The server is mounted so that I can move my saved file to it once complete.
Unmounting the servers fixes the problem and Illustrator CS6 returns to being normal (not causing a spinning beach ball).
This is repeatable, not intermittent.
View 2 Replies
View Related
Apr 22, 2012
I had yesterday a photoshoot, today I was importing my images from my CF card to my local drive C: with Lightroon 4... Everything was fine, till a moment I get an error of Windows: "you need to format the disk in drive before you can use it."
I rejected my card, insterted in my dslr to check if picture still available, but on my screen I see the same error message 'Format first the card to use it'
50% of my images are not imported and I need them.
View 2 Replies
View Related
Mar 23, 2013
Using Lightroom 4.3 with Camera RAW 7.3 on latest MacBook Pro with 256 GB SSD harddisk, 8 GB internal memory bought 2 months ago. Hardware shows no other problems or malfunctioning, no issues with RAM or otherwise.
Started Lightroom 4.3 did an import from perfect images (viewed before using various other software packages) stored on the harddisk. Used option ADD to add to the catalog. Almost immediately certain images were showing missing areas or areas with pink/white stripes, etc.
I didn't even touch the images to view or edit them. The images were corrupted on disk as previewing them with other software packages showed.
View 24 Replies
View Related
Jun 23, 2012
I have to deal with multiple layer documents for producing underwater mosaics. Very often, the images vary in colors a bit. For large mosaics, I run the images thru a batch job before I use them. For smaller mosaics (e.g. just 10 to 20 images), this is a bit of overkill, in case I have to tweak just 5 or 10 or so.
In this case, I prefer picking one of the 20 layers as my "reference" and manually match the colors of those layers, that need the match, one by one.
My question now: Is there a way, that I could select, lets say 10 layers that need the match and apply the Match Color to all of them in one go?
View 3 Replies
View Related
Dec 31, 2013
I cannot select more than 1 tag and drag & drop them onto pic. PE12 forces me to apply 1 at a time. PE11 worked fine
View 2 Replies
View Related
Aug 13, 2013
I often work on drawings which have multiple xrefs, each having up to 100 Layers or more, so the layer manager can be a bit difficult to trawl through to find a local layer to select.
I know how to create a local layer filter using the code ~*|* from the new filter area in layer manager.
Ideally all I want to have to type in is: LOCAL and then the local layer filter would be created, with the filter name being Local-Layers (or similar).
View 9 Replies
View Related
May 5, 2013
My (previously wonderful) local adjustment brush has apparently quit working. Whenever I attempt to make local adjustments - using either the standard presets or custom settings - all the adjustments made are applied to the entire image, not just locally. Density and flow are set to my typical values and Show Selected Mask Overlay shows the extent of the applied effect, but whatever adjustment I make is applied generally, over the entire photo, rather than to the selected adjustment area.
View 8 Replies
View Related
Oct 25, 2013
how to apply new mask to multiple existing adjustment layers
View 7 Replies
View Related
May 11, 2012
I would like to use Photoshop to create accurate residual images (image describing the difference between two images) and to apply such residual images to restore one of the images used to create the residual.
given two 8bit images (pixel values in the range [0, 255]) a residual image would be created by subtracting one image from the other:
Residual = Image A - Image B
as the potential range of this residual is [-255, 255] it must be mapped to [0, 255] to be saved as image:
Residual = (Image A - Image B) / 2 + 127
given the residual image and image B, image A can then be restored as
Image A = Image B + (Residual - 127) * 2
so my question is: are these two processes (creating a residual image and restoring image A) possible using blending modes, and if not, can i program it somehow? I already tried it using Pixel Bender, but the Pixel Bender Photoshop plugin doesn't seem to work for pixel bender kernels that take two input images.
View 8 Replies
View Related
Mar 2, 2013
I want to create an action to apply to several images. This had to be the result. But I want to use the action for a portrait or landscape image or 72 or 300 dpi picture.
View 5 Replies
View Related
Sep 16, 2013
When I try to use the Apply Image Command to blend two images, the command only allows me to blend the target image with itself; that is, with two images open, the only image available to me as the source image is the target image.
View 2 Replies
View Related
Jul 28, 2012
I have 75 different images and would like to apply 4 different hue adjustment layers to each image and save them so I have 300 new images.
Idea on how to do this is;
Copy hue adjustment layer Merge the lower hue layer with the top image layer. Name the merged layer to what the image layer was Save newly merged layer and image layer in PNG format.
Doing this 300 times manually will take me an age, are there any scripts for CS4 that can automate this?
View 7 Replies
View Related
Oct 6, 2012
I have a series of pics (approx 80) that I'd like to load into Elements, with each photo going into a single layer. I google'd a series of old posts where somebody used a "script", but the links are no longer working and that trails is dead.
View 9 Replies
View Related
Aug 3, 2013
HDR toning crashes PS CS6 and CC on 64bit only.opening 32bit or certain 16bit file on photoshop(CS & CC) 64bit crashes every time.HDR images dont preview properly either.same file loads as 32bit in CC 64 bit mode and loads as 16bit in CC32bit mode.actual file is in 16bit mode.Photoshop 32bit mode has no such issues with opening or toning HDR image.
View 19 Replies
View Related
Aug 4, 2012
I am trying to learn what can be done using HDR Toning in Photoshop CS5. At first I was impressed by its capabilities. I was working on a photograph of a train in a wooded valley in eary spring (before most leaves were out), with bright sunlight coming from almost straight overhead. So, the top of the train and the ballast in front of the train are very bright, the woods to the sides were shadowed, and the sides and nose of the train were in deep shadow. HDR Toning seemed to be giving me very nice control over adjusting the various tones. But when I closed the HDR Toning window, PhotoShop thought for a couple of seconds, and then changed my image, making it much darker than it was when the window was open!
What's going on here? Is this expected behavior? How can I get HDR Toning to keep my photograph from changing after I close the window?
View 1 Replies
View Related
Dec 13, 2012
I have a question about using toning curves...
In older versions of Photoshop, I was able to use Paul Butzi's beautiful toning curves (which are ACV files) through the Curves menu.
There was a 'Load' button, and if I pressed that, I could browse my curves folder and pick whatever curve I wanted. Is there any way to do that in Photoshop CS5? I can't seem to find a 'Load' button under Curves, and I'm not sure how to use the Custom Curve feature.
I can't seem to load them under Filters, either. How I could load them?
View 2 Replies
View Related
Dec 28, 2006
how to get the blue tone like in this picture, while maintaining the true whites and blacks?
View 4 Replies
View Related
