I scan my pieces in. Trace them with the pencil (love the new version) save my file. Than I save as a svg file. But in some cases it changes the size of these objects and in others it does not. So some place something is different. How do I stop this?
View 2 RepliesI'm trying to change the size of a certain object in my image. It's a simple clip art that I got off the web and pasted into Photoshop. What I'm trying to do is select it with the select tool and then resize. None of the resize options I'm using seem to do exactly what I want though. Here's what I've tried:
1) Image -> Image Size -> do my adjustments. This changes the size of the whole image, not the selection.
2) Image -> Canvas Size -> do my adjustments. This changes the size of the canvas and has no bearing on the size of any of the objects within it or the entire image.
3) Select -> Modify -> Contract/Expand -> enter the number of pixels. This changes the size of the selection box, but not the contents within it.
4) Select -> Transform Selection -> do my transformations -> hit enter. This changes the size and shape of the selection box, but not the contents within it.
What do I need to do in order to change the size of a particular object within my image?
I'm not sure what I did to make this happen or how to change it back, but for some reason when I change the size of an object/line it changes the stroke weight as well. (For example, if I drew an ellipse with stroke weight 2 pt, and then increased the size the stroke weight would be 2.856 pt or some such number instead of 2 pt.) How to change this back?
View 3 Replies View Relatedwhy Photoshop keeps changing settings for placing objects, image size etc.?
For example: I create a new Photoshop document:
ppi: 300
Width: 160 mm
Heigth: 160 mm
after clicking "OK", these go to 160,2 mm or less than 160 mm.
The same with the sizes and places of objects etc. I create a 20 x 20 mm circle. One click later it is 19,89 x 19,89. I set it's location to X: 80 mm, Y: 80 mm. One click later: 80,02mm
In PSP 8, if I have many text entries within a single vector layer, all with same font size and type, is there a way to change the font size for all of them at once?
View 2 Replies View RelatedSome of my artboards use the color yellow to highlight selected objects. Can I change that?
View 2 Replies View RelatedSo I have this multipage document I am working on and I needed more pages so I added the artboards I need however then now go beyond the clip board size (see picture below), how do I change that?
View 5 Replies View RelatedI am trying to create text along a spiral path, and I need the text to get smaller as the spiral gets smaller towards the center. Something like this...
I have read that there has been a script called "ChangeSizesOfTextSelection.js" but it's for a much older version of Illustrator.
I am currently on CS6.
Tricky one to add a title for but if I am resizing an object precisely using the W Value and H Value fields, for some reason the size I enter then changes. So, for example, I have an object that is 57.15mm wide. I then change that value to 57mm but when I click return it then changes back to the 57.15mm value. This appears for all other values. So if I change it to 60mm it then changes it to 59.972 mm
Not really sure what setting I have that's making it do this. My document is set up in mm.
Im brand spanking new to Illistrator, andfor my first project decided to re-make my logo for my small minecraft server, since my origional was such poor quality.how to make what I wanted, the problem im having is when I change the size of my grouped image it creates grey lines between the rectangle shapes, There is no gaps, if you zoom in as far as you can they disappear.I exported the image as PNG and they still percist, attatched (Top right finished origional size I made it)
I found out I could "rasterize" my selected content like in video editing "render", I had to do this to "finish" a vector image, any more information on a better workflow.
I have pale of different objects with diferent sizes, which i want to transform to 250*250, how can i do that?
View 2 Replies View RelatedI was using a custom size of artboard in illustrator, but I now I want to change it to A4 size for printing. However, when I change it to a A4 size artboard, the size of objects on that artboard remain unchange. As a result these objects do not fit the new size of artboard. Are there any way that I can change both the size of artboard and objects at once?
View 6 Replies View RelatedIs it possible to show the overall size of several objects in the control panel? I can only do this by grouping them.
View 1 Replies View RelatedI work at a university and have logos shared with me from other designers, most of which are working on Macs and I'm working on a PC. When I open the logo and select all, the size displayed is 227.5417 inches x 227.5417 inches. The last one I received, the actual size of the logo was 2 inches x 1.75 inches. How do I get Illustrator to display the actual size of the logo?
View 7 Replies View RelatedI have a question, quite a tricky one. Is there any way how can I copy and paste position and size of two objects?
Let's say I have a circle 2 x 2 cm and it's position is y 5cm x 5cm, I have a square of size 3 x 7 cm and it's position is y 0cm x 0cm.
How do I copy and paste in a single command/step the circles position and size to square, so I can get square of 2 x 2 cm and it's position 5cm x 5cm?
Something like copy + paste in place with a different logics. I hope You understand what I want.
I'm doing it now manually, I'm copying size and position of one object to another [ctrl + c > ctrl + v] but it takes quiet a while,
how can I copy and paste position and size of two objects?
Let's say I have a circle 2 x 2 cm and it's position is y 5cm x 5cm, I have a square of size 3 x 7 cm and it's position is y 0cm x 0cm.
How do I copy and paste in a single command/step the circles position and size to square, so I can get square of 2 x 2 cm and it's position 5cm x 5cm?
Something like copy + paste in place with a different logics. I hope You understand what I want.
I'm doing it now manually, I'm copying size and position of one object to another [ctrl + c > ctrl + v] but it takes quiet a while,
I would like to enlarge about 400 tiny ellipse but I need them to fit in the same space and not spread out.
View 4 Replies View RelatedI want to change the size of the image in Gimp to 3957x4429 px (67x75 cm) at a 150dpi (the image we have has a 300 dpi.) When i do this in image - print size it keeps changing the width.
The system is not allowing me to get the picture a few cm larger. Is there any way I can overwrite this?
i currently have a logo that is 460X440 pixels and 12.17cmsX11.69cms and the resolution is 96 pixels per inch.
i am wanting to change it into a 2cm X 2cm avatar that is less than 6K in size,
how do i do this? everything i try makes the output file about 24k in size.
the reason i am doing this is the forum i regularly post on has a max avatar size of 6k.
Is there a way to change the leader arrowhead size without changing the dimension arrow/tick size?
View 9 Replies View RelatedI am very much new to AutoCad, but have learned quite a bit about it in the last few days. As a part of the learning I have been building a 3D model of the shed my dad is building. But I ran into a problem on the roof and cant seem to figure out how to click everything into place.
My problem: I need to keep the size and shape of all objects while also connecting the objects to the main structure. I need to keep A and B connected to the main structure and adjust the angles so that both meet at C. But if I move one then another moves out of place. (In the pic B is out of place) All I want to do is hold the beams at A and B in their spot while adjusting the rotation on both beams to meet at C all at the same time. I have tried to fine adjust the rotation on the beams individually but still cant get them together. I cant seem to get the constraints feature to work, because I guess it only works in 2D. I have tried to use the align tool but it just throws everything haywire.
Being a transplant from AutoCAD I am used to using ctrl+1 to change the properties of selected objects. How is this done in 3DS? I would like to change depth of the cylinders...
View 1 Replies View Related I'm using AutoCad LT 2007, so I understand I may not be able to do this.
I have two object, such as circles, and they are a certain distance apart. It does not matter. I have an object/text between them that does not fit between them. I cannot scale the inside object as it has to be the same size as the others of it's kind. I would like to take the two circles and put a greater distance between them. In other words I want there distance to go from, say, 5 units to 10 units without moving the center point of the two objects. I was thinking something similar to: select the two objects, select the midpoint of the two objects, and enter the command to change the distance between them. Almost like a stretch command out from a center point, but with two objects. I can find the center point of the two objects, that's no problem.
This is the way I do it now, and I'm trying to find a quicker way to improve my AutoCad skills. Select the object on the right and move it right a certain distance, then select the left object and move it left the same distance. It works, it's just slow.
How does one remedy this Adobe error message? "Can't scale the objects. The requested transformation would make some objects too small to use." This one always gets me. I'll spend more time trying to find the object in question. This has happened in almost al versions, but this time it's CS5.
View 3 Replies View RelatedAll i want to do is create a new image... a black background to be exact which I can do easily enough, then I open a second image (a picture taken by hubble, im creating a new desktop background). I copy that picture, paste it onto the black background. All I want to do now is center the hubble picture on the black background. I can do it manually of course, but when I click on the hubble picture so that it is selected then go to the 'objects' drop down menu I see the 'align' option, it then opens another menu and it has it right there "center in canvas" but it is not selectable, actually the entire 'align' menu is grey meaning I cant select any of the align options.
Also, same project, the hubble picture... I want to but a border around it. Under the 'image' drop down menu is a add border option... but it adds a border around the black background/canvas and not the hubble image that I have selected!?! Why?
In both cases its like the program is not accepting that I have a new image (the hubble image) selected, its only allowing me to alter the initial black background.
Is there a way to change a common parameter of multible objects — For example scale x parameter, or Length Segs parameter of say 20 box objects, and change that parameter for all of them as as easily as changing one? I used Max long long ago, but am coming from a Maya and Softimage background.
View 5 Replies View RelatedHow to change position of several objects toward center (let's say all objects have pivot point in one place) ?
View 4 Replies View RelatedIm working with an image (pictured below) and I want to make all of the white bits clear, so as to allow whatever colour is behind to show through.
View 7 Replies View Relatedpeace sign.cdr
Howdy gang, I am trying to create a peace sign in CDX6, but I cannot change the lengths of the two angled members, as they seem to be selected in some special mode. I am sure that this is a quick fix (and I have a CD Book coming today) and obvious.
I am going through an architectural background, converted over from Revit. I have to go through and routinely burst the object, then qselect, choose what is not equal to bylayer, and change to bylayer.
I don't want to burst everything, making a monster out of the file, but going into every individual block to change the colors within the block to bylayer is also extremely time consuming.
Is there an easier way? maybe a wishlist item for ACAD 2014 to include objects within blocks, when using QSE?
We need to xref a drawing with a different unit. When I go into the drawing file I want to xref and use the "-DWGUNITS" command I change it from feet to inches and use Architectural. Answer yes to all questions and certain objects disappear. Most of the objects are pline or spline objects. Here is what I see in the AutoCAD Text Window:
Scaling failed for: <AcDbZombieEntity FD3C>
Scaling failed for: <AcDbZombieEntity FD3E>
Scaling failed for: <AcDbZombieEntity FD3F>
Scaling failed for: <AcDbZombieEntity FD41>
Scaling failed for: <AcDbZombieEntity FD42>
Scaling failed for: <AcDbZombieEntity FD44>
Scaling failed for: <AcDbZombieEntity FD45>
Scaling failed for: <AcDbZombieEntity FD47>
Scaling failed for: <AcDbZombieEntity 1956F>
Scaling failed for: <AcDbZombieEntity 19570>
There a lot more of scaling failed messages. too many to show. How can I xref in these drawings with different units without objects disappearing?