I currently have an assignment that requires us to turn our 2D drawing into 3D. I am having difficulty with the walls and constructing them. Any recommendations on how to begin this process?
View 9 RepliesIs there a way without deleting the part from the assembly to make said part not show up in the drawing? I need to be able to do this in the model and not in the drawing. Suppressing the part create a level of detail, but I would have to create new views in the drawing and I don't want to do that.
The part is used in some cases, but not in others so I don't want to delete it from the assembly.
If some poor soul decided they didn't want/need them taking up screen real estate, how would said individual permanently disable them?
Tools > Option > Display > Display Drawing Tabs (FILETABCLOSE) works fine for the session, but it's not being remembered between sessions. How to make it leave and never come back.
It happens sometimes, when I try to turn off the visibility of a part in a created view, the option is grayed out, can't uncheck visibility. Whats the reason?
View 4 Replies View RelatedHow / which system variable to change such that the Save List As dialog box don't appear every time I click on the publish button?
View 2 Replies View RelatedSince changing to Inventor I seem to be unable to turn off visibility of parts in assemblies on a drawing. Usually I just expand the view in the browser then right click on parts and turn off visibility. When I try this the visibility option is grey.
View 5 Replies View RelatedJust upgraded from 2010 to 2012. How do I turn off this new "accudraw" that pops up when drawing a line? And can I disable it permanently? (accudraw is the only thing I can equate it to).
View 2 Replies View RelatedThis problem has bugged me for several versions. I'm using 2012 at the moment as I haven't wanted to get into the fiasco of a new drawing version with 2013.Anyway, the image below really tells the story for me:
You can see the behavior of the crosshairs overlapping a drawing line with Hardware Acceleration On and Off. It's always been handy to have the drawing lines or crosshair go to the "negative" color when they overlap. However, with Acceleration ON, that behavior goes away entirely. This happens on every machine we have. It's not isolated to one machine or video card. In fact, on this same machine I have had this happen with two entirely different video cards.
So, I have to choose...hardware acceleration or overlapping negative colored lines.
I create a drawing of an iPart, while doing so I have the iPart model open in the background. When placing a view on the drawing the active factory member is the default option, I have a bad memory so forget to tell Inventor that actually I would like to use a specific iPart member in this particular drawing view. I then spend a long time laying out and dimensioning the drawing. When complete, I create a second sheet and copy all information from sheet 1 onto sheet 2. I then double click on the main drawing view and change the model state to an alternative factory member. At this point I realise that the drawing on sheet one is based on the active factory member and start swearing.
The result of changing to a different member when the existing drawing is based on the active member is that ALL DIMENSIONS DISSAPEAR FROM THE DRAWING AND HAVE TO BE PAINSTAKINGLY REPLACED. At this point I will usually REDRAW SHEET 1 so that further sheets can be created quickly in the future by selecting an alternative factory member.
can I change the software defaults somewhere in the setup to prevent the 'active factory member' being displayed as an option in the first place?
How can I turn a picture to line art drawing?
View 7 Replies View RelatedHow do you turn a photo into a line drawing?
View 6 Replies View Relatedis there any filters to turn a photo into a line drawing?
View 6 Replies View RelatedI have some children's drawings that I want to screen print on a t-shirt. I have traced them with a sharpie so they are dark enough but my problem is they have alot of eraser marks showing up. What is the best way to get a good printable object.
View 6 Replies View Related20110421veiwports turning off.jpg AutoCAD isnt being nice to me lately another hassle i have is the viewports randomly turn off ( they dont show anything) and when i turn those ones on, others turn off.
i dont know how to change the topic to "solved" however a collegue told me to enter MAXACTVP at the command line the value was 16, i was told to set it to 64 ( i had 21 viewports ) and they all came on.
I haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies View RelatedEventually after I copy and paste with the clipboard enough times within one drawing, the ability goes away and I can no longer copy and past one item from one drawing to a separate drawing. I need to use the clipboard function because that is the only way of getting an item from one drawing to another.
I have download a clear clipboard function but it doesn't work. Closing CAD and restarting does not reinstate the function.
I have created an iLogic panel which allows me to control my revision a lot easier and puts my entered data into the parameters of the sheet itself, is there a way to have this show up on the drawing itself for a template?
View 1 Replies View RelatedI am trying to put together a lisp routine for exporting a Civil3D drawing to basic autocad entities and convert it to a clients layer standards.
I don't want any user input, so I see two problems with the routine at the moment.
Step 2. SAVEAS - I want the drawing to be saved in the same directory as the current drawing, either called "CLIENT_export.dwg" or preferably "Export_{current drawing name}.dwg". If the dwg exists I want it either to overwrite or increment a suffix number.
Step 4. At the moment it askes the user for a selection, I want it to select "ALL"
;;;Purpose to convert a Civil3D drawing into CLIENT layer standards.
(defun c:client ()
(setq old-echo (getvar "CMDECHO"))
(setvar "cmdecho" 1)
[Code]...
I don't have any experience with LISP or any other programming. I have just been cobbling this together from bits and pieces I have found on the web.
My Autocad has started a new behavior. When (in Win7) I double-click on a drawing file in Windows Explorer, Autocad opens the drawing file and also starts a new drawing, all in the same session of Autocad. Is there some system variable or Windows variable that controls this?
View 1 Replies View RelatedWhen exiting a drawing by clicking on the small X in the upper right corner of the drawing, my program routinely "stops working". I get the error message that it has stopped working and it closes. No chance to save work in other drawings open at the time. I often have three or four drawings open so my only workaround is to go through each and save, then close the one I want to close, let the system crash and reopen the other drawings. It does not crash every time but several times a day.
View 6 Replies View RelatedThe layer is on and the ground levels on the architectural drawing in model view show the number and the box surrounding them however in the drawing window be it in the numbers have dissapeared and we are left with only the boxes ?
View 3 Replies View RelatedSetting up a tabulated ipart drawing template. Which is better...one drawing file with a table or individual drawings for each tabulation? Also does one method work better than the other when introducing vault?
View 1 Replies View RelatedI want to insert another drawing layout tabs contents in current drawing.
It's easy for MODEL tab, but for LAYOUT tabs, I dont know how!?
I prepared a code for INSERTING MODEL tab in current drawing:
(defun INS_DWG (TAB path dwg P / blk)(setq blk (strcat ""*" path dwg """));(setq N (vla-get-count (vla-get-layouts)));;Number of LAYOUT TABS in dwg(if (or(= TAB 0) (= TAB nil))(command "INSERT" blk P 1 0)); TAB=0 or omitted ==>Insert MODEL;(if (= TAB 1));==>Insert the 1st LAYOUT in dwg file;(if (= TAB 2));==>Insert the 2nd LAYOUT in dwg file;and so on....);;;usage:;;(INS_DWG 0 "c:\test\" "test.dwg" '(0 0))
I've recently made a new drawing template with ilogic prompts for entering data for all fields within the template. It also sets view sizes etc. I have lots of master drawings, which are reused when sizes etc change for a contract, which i would like to transfer to this new template. Drawing Resource Transfer Wizard does not offer this function.
I could get all drawings in a folder copied to specific sheet size on the master template.As the template will probably be developed further in the future I'm very loathed to do this take manually.
Recently upgraded to Civil 3D 2013 and drawings opened up fine. Now today any drawing that opens shows the plan view as last saved but then after loading takes the drawing and shifts it into a 3d view similar to a crossection. Is there a setting somewhere that has been changed? I noticed after a windows 7 update was preformed.
View 7 Replies View RelatedI realize it may be a Civil3D question. When I change my drawing scale in the "Drawing Settings" dialog box to 1"=40', for example. The Annotative scale in the Properties Palette changes to 1"=40'_XREF.
View 2 Replies View RelatedI'm taking over the development of some Autodesk addins that are used to parse a drawing to bring back text from the drawing, namely title block and bill of materials information. I have another process that runs and reads the meta data for the drawing itself that gets run from Vault before checking in the drawing. I need to know if I can combine these two processes such that I can parse the drawing outside of AutoCad. Is this possible?
View 3 Replies View RelatedI would like to know if there is a way to insert drawing no.1 into drawing no.2 (not copy sheets!) so that if I change the drawing no.1, the drawing no.2 (the one that contains no.1) also updates.
That is because I would like to have one part of the drawing that is ''standard'' and multiple drawings that contain this part (so that this part is defined in all drawings but is always the same). Because I don't want to have a separate drawing for the ''standard'' part, but only drawings that contain it.
is it possible to change a 'flat' drawing into an isometric type of drawing? I currently have an end view of an item that I need to draw in isometric, but it's fairly detailed with curves etc and will take a long time to draw again from scratch in isometric...
View 7 Replies View RelatedI have two drawings A and B. I work in A and I need some design elements from B.
When I open the drawing B everything I have in drawing A disappeared. I refer to all elements of design (blocks, lines, polylines, etc.).
After studying the issue have concluded that the design of all elements were automatically isolated. Right click> Isolate> End Object Isolation and everything reappears in drawing A.
I mention that I installed Autocad Map 3D 2012 x64 on Windows 7 x64 and work in Map Classic Workspace using the same coordinate system in both drawings.
I downloaded multi-batch as someone here said they like it for batch plotting. Once installed, however, it has changed a setting in AutoCAD. I can no longer open more than one drawing at a time. If I have a drawing open and try to open another drawing it asks me if I want to save the current open drawing.
I can not close a drawing either without exiting AutoCAD or trying to open another drawing. I un-installed multi-batch but it did not fix the problem.