AutoCAD Inventor :: Turn Off Part In Drawing
Feb 27, 2012
Is there a way without deleting the part from the assembly to make said part not show up in the drawing? I need to be able to do this in the model and not in the drawing. Suppressing the part create a level of detail, but I would have to create new views in the drawing and I don't want to do that.
The part is used in some cases, but not in others so I don't want to delete it from the assembly.
View 9 Replies
ADVERTISEMENT
Oct 4, 2012
To create my new part, i used the deriven part of another part, and used only ‘Body as work surface’ before inserting in my new part.
When I create the drawing of my new part, why is it that I still see all the ‘Body work surfaces’ of the direven part?
When I make it on my other computer I dont see it... so it is surely an option…
View 1 Replies
View Related
Aug 16, 2013
I don't want to inventor to ground a part when I insert it into assembly. How do I turn this off?
View 9 Replies
View Related
Jan 18, 2012
When I turn on shadow I just get a square under the part that I modeled. If I turn on ray tracing I get a detailed shadow but then I have to wait a minute or two every time i move the model. In the video tutorial it seems that the guy has a good shadow with no raytracing.
View 2 Replies
View Related
Oct 4, 2011
It happens sometimes, when I try to turn off the visibility of a part in a created view, the option is grayed out, can't uncheck visibility. Whats the reason?
View 4 Replies
View Related
May 20, 2010
Since changing to Inventor I seem to be unable to turn off visibility of parts in assemblies on a drawing. Usually I just expand the view in the browser then right click on parts and turn off visibility. When I try this the visibility option is grey.
View 5 Replies
View Related
Feb 20, 2013
I create a drawing of an iPart, while doing so I have the iPart model open in the background. When placing a view on the drawing the active factory member is the default option, I have a bad memory so forget to tell Inventor that actually I would like to use a specific iPart member in this particular drawing view. I then spend a long time laying out and dimensioning the drawing. When complete, I create a second sheet and copy all information from sheet 1 onto sheet 2. I then double click on the main drawing view and change the model state to an alternative factory member. At this point I realise that the drawing on sheet one is based on the active factory member and start swearing.
The result of changing to a different member when the existing drawing is based on the active member is that ALL DIMENSIONS DISSAPEAR FROM THE DRAWING AND HAVE TO BE PAINSTAKINGLY REPLACED. At this point I will usually REDRAW SHEET 1 so that further sheets can be created quickly in the future by selecting an alternative factory member.
can I change the software defaults somewhere in the setup to prevent the 'active factory member' being displayed as an option in the first place?
View 6 Replies
View Related
Jan 26, 2012
I am having an issue with a drawing, I have an assembly running in Inventor, the parts appear to be in a transparent mode, it is actually a translation from CATIA V5, everything seems to be ok, but when I open a drawing to create dimensions, only the parts that are not transparent appear in it.
View 4 Replies
View Related
Dec 21, 2011
I need to use 2 part list in my drawings. I have made the second part list in the style editor and saved it but how do I select it?
View 1 Replies
View Related
Dec 20, 2011
I have a sheet metal part with a fully dimensioned drawing made for it. I then make a mirrored (derived) part out of the original. Is there an easy way to get a fully dimensioned drawing of that mirrored part?
I have tried making a copy of the original parts drawing and then replacing the model that is referenced in the drawing but that just gets me a drawing with a bunch of pink dimensions and I have to drag all the dimension points to reattach them.
View 4 Replies
View Related
Jan 6, 2013
im using inventor 2012.im trying to put a part list on my drawings.but for some reason, the part list is using a Gost Form. ( diffrent layout and polish/ russian text )How do I go back to default.I have allready tried to reinstall inventor, no go.
View 2 Replies
View Related
Jul 10, 2013
I set up default tolerances in my part and would like to have them displayed in the drawing. I used the "Retrieve Dimensions" tool but they aren't showing up. I have the Tolerance Method set to Default.
View 9 Replies
View Related
Sep 24, 2012
I'm having trouble showing a reference part in an assembly drawing. When said part is set to "reference" it is no longer visible on the drawing.
View 9 Replies
View Related
Feb 18, 2013
I want to know if there is any api to check if a particular drawing is a assembly drawing or part drawing.
View 4 Replies
View Related
Feb 2, 2013
In solidworks, if I have several similar parts to draw, I can draw one part and annotate it and then to save time and effort I can save the drawing as one of the other parts and then change the part reference in the drawing as I open it up.
View 7 Replies
View Related
Aug 19, 2009
What would be best work flow for showing a part and having drawing for the different stages of machining, I would like to have a print with different sheets at say a lathe stage, than a broached part stage, then a milled stage. Should I do a part for each stage, just save to a different name or Start with a part from the first op, than derive it to another part, and make that part complete on second op, than derive it and make a third part, and so on.
Would like to do this, because we make special shaped part from round stock, so need print's to tell floor people rough blank form. Than mills machine it into final form from that lathe blank.
Similar to casted and machined drawing
View 8 Replies
View Related
Jun 21, 2012
I am trying to move a component within a part drawing, not an assembly. When I do "move bodies" it wants to move every extrusion within my drawing. If I click move face, then I have to click every face that I want to move (which is time consuming) and then it often times doesn't work? Sometime it works other times it just moves the origin indicator and doesn't move the faces I have selected.
View 2 Replies
View Related
Jul 11, 2012
Is there any auto generate command to retrive the part drawing from assembly drawing rather than open part one by one to retrive the drawing?
View 9 Replies
View Related
Apr 10, 2012
I am using Inventor 2010 and would like each view of a drawing to show a different machining step. I.e.. A rough cut dimension and then the finish cut dimension. Is it possible to create the part as it would be machined and then use the EOP marker to set each view. Would like to model one part and get all views.
View 9 Replies
View Related
Aug 8, 2012
Is it possible to update an existing drawing to reference a new part or assembly file while maintaining associated views and possibly the annotation also?
I have tasks which require frequent subtle changes to assemblies. These assemblies will then be given a completely new file name, so it is no longer just a revision change but a new part altogether.
View 5 Replies
View Related
May 21, 2013
Is it possible to get the "actual" calculated area of the face of a part from a drawing view? I looked at the drawing view object in the api but didn't find what I was looking for. What my goal is, I want to calculate the actual square foot of this piece and then subtract it from the overall square foot so I can calculate waste. Perimeter's of pieces can be in multiple forms, radial, straight or a combination of the two. See image below.
View 1 Replies
View Related
Jan 29, 2013
I am currently working on a product where I want to make 2 part lists in my drawing of the same assembly. The first parts list has to view all the parts that are always delivered with our product, and the second one has to show the optional parts and features that could be delivered with the product.
I want both lists to be categorized the same way (comments, material, name), I want the numbers of the list to be chronological (also I don't want the second parts list to start the numbering at 1) and I want both lists to stay connected with their balloons.
Is there any way this can be done, like adding or removing part links to the list manually?
View 1 Replies
View Related
Nov 7, 2013
I wonder if it's possible to see with ilogic if a part exciste in all others view (in assembly) of the same sheet?
View 9 Replies
View Related
Jun 12, 2013
Using the 'Run Other' rule I can run a rule to switch holes on & off in a part. The rule is in the part & the run other rule in the drawing. The drawing will only update once the part is open. I would like to see the part open when the rule is ran from the drawing, how can this be done?
View 3 Replies
View Related
Oct 13, 2013
If you've had to use different design view representation of the same PART on a drawing in multiple Views at the same time, you already know that whenever you suppress completly a feature, the representation loose the condition stated in the model view and if the suppressed feature is reactivated, it then appear in all view. You have to right-click on the view and select "Apply design View" to reset it, or re-select the design view representation in "Edit view".
Recently I faced a case where i had to build a iLogic multi-body part representing a crate made of either sheet or bar, with a removable top and variable solid for top, sidewall and base, driven trought a in-drawing form! Reason being the customer wanted a easy, useable model for the shipping clerk to generate a custom crate drawing for the crate contractor, therefore freeing precious time for the drafting departement. Usually I would have used occurence visibillity from a assembly, but the document management part of the deal, was too much for the computer illiterate user... So, off i went creating a multi-body part, only to face the aforemention problem with view changing representation due to complete solid suppression.
So here's How-to Set representation view for part in drawing:
The trick is to set every view to it's representation by using the edit window interface code.
The iLogic line to set a View to a specific Design View Representation:
ActiveSheet.View("1").View.SetDesignViewRepresentation("View5", False)ActiveSheet.View("1").View.IsRasterView = FalseThisApplication.ActiveView.Update()
I use this code in "IF" statement. You must repete the code for each view, removing the "Raster" line force a raster only reaction on the view, and the update must be placed after each view, otherwise it only update the last one.
Example:
If TYPE_COUVERCLE = "AUCUN" Then
ActiveSheet.View("2").View.Suppressed = TrueActiveSheet.View("1").View.SetDesignViewRepresentation("View5", False)ActiveSheet.View("1").View.IsRasterView = FalseThisApplication.ActiveView.Update()ActiveSheet.View("3").View.SetDesignViewRepresentation("View2", False)ActiveSheet.View("3").View.IsRasterView = FalseThisApplication.ActiveView.Update()ActiveSheet.View("4").View.SetDesignViewRepresentation("View1", False)ActiveSheet.View("4").View.IsRasterView = FalseThisApplication.ActiveView.Update()
Else If TYPE_COUVERCLE = "CONTREPLAQUÉ" Then
[Code]...
I'm telling the model that the disapearing element "TYPE_COUVERCLE" is driving the representation, only when it change does it fix the view, regenerating or changing the Design View Representation (the TYPE_SIDE and TYPE_BOTTOM are always active or always suppressed in their respectives views, therefore not influencing their respective appearance in other view). If you had multiple dissapearing solid or feature you would have to build a similar code for every one of them...
View 1 Replies
View Related
Nov 5, 2013
I've got a view of a presentation in a drawing and one of the parts which is in a sub assembly.
I've checked the visibility in the presentation and the drawing and the assembly but all say visible.
Restarted the computer, but still no change.
see below a pic of the drawing, I've drawn in a red rectangle where the part should roughly be.
IV 11
View 4 Replies
View Related
Nov 2, 2011
I want them to appear as a one of the choices in the box after you click NEW (part, drawing, assembly) asside of standard options?
View 1 Replies
View Related
Apr 18, 2013
how could I synchronize my drawing with the referenced part?
I have a "User Defined Propertie" called "RBMATNO" in the part and in the drawing.
View 3 Replies
View Related
Sep 21, 2011
I thought I kind of understood level of detail and master views but apparently not. I have an I-Beam that I have cut and bent in the part file. In the drawing I would like to show the beam both full length and in the bend configuration. From my reading I thought I would be able to create one view with the part in final shape and one view where I suppress all the bends and show the part with the cuts in it but all flattened out. I created view1 with the part bent, I then created view 2 and supressed all the bends. Unfortunately the bare does not toggle back and forth in the part, and when I place the part in a drawing. I am still not bale to have a difference in the part in the drawing with the two configurations either. What is the proper method of obtaining the two different views?
Also is there a way to request software enhancements?
We create many large assemblies where the shop uses a cut sheet to make the parts. Since many of the parts have secondary opperations like forming or cutting done to them i like to create a second sheet with the piece parts dimensioned on the sheet. In SolidWorks i would simply create the views, create an assembly BOM and link the balloons to that BOM, end of story. Not in Inventor! And creating a million LOD views to hide all but the one part in each view is not an answer for a professional CAD program.
Inventor Premium 2013 SP1.1
Vault 2013- plain vanilla version
HP G71 notebook
celeron cpu w 4gb RAM and 64 bit system
Win 7 home premium
View 2 Replies
View Related
Jul 17, 2012
I am looking to check the hiddenline status of a part in a drawing. The drawing is made from an assembly. I dont want to take all the segments from the view and check for each of them. I want a way I can just grab the entities that are made from an occurence.
I was hopping to use the drawingcurve(modelobject), but I dont know what to use as the modelobject! is it the edge, edges, component definition... Here some of the code that is not working.
Dim _portePattern As OccurrencePattern = oassbly.ComponentDefinition.OccurrencePatterns.Item("Pattern Porte")
Dim _PoigneeOcc As ComponentOccurrence
Dim _PorteOcc As ComponentOccurrence
Dim PatEle As OccurrencePatternElement
Dim _poigneeDef As ComponentDefinition
Dim _poigneeSFbody As SurfaceBody
Dim _poigneeEdges As Edges
[code]....
View 1 Replies
View Related
Jan 16, 2013
I have an assembly were i want to exclude some parts in a sectional drawing view. I mean i want those parts should be visible in section view but should not get sectioned. And the remaining parts will be in a sectioned view. Is that posible or i may be missing something.
View 8 Replies
View Related