AutoCAD 2010 :: Flatten An Object
Sep 7, 2012I've been using flatten for a long time and I just noticed that after flattening an objects sometimes it doesn't give you the exact shape of an object. Is there a reason why?
View 1 Replies
ADVERTISEMENT
AutoCAD Visual LISP / AutoLISP :: Flatten 3d Object To 2d
Mar 15, 2013I am trying to write a simple (or at least I thought it was) code to flatten a 3d object into a 2d shape. For some reason after ACAD runs the lisp it recognizes the flatten command but it will not select all. this is what I have:
(defun c:fl () (command "flatten" "all") )
I have even tried the pick first command, to select all then run the flatten command but that still doesn't work.
AutoCAD 2010 :: How To Flatten 3D Model
Nov 18, 2011FLATTEN doesn't exists, and when I try FLASTSHOT it asks me for digits and I really don't know what to type.......the ultimate goal is to make all my lines "FLAT" since in top view they look good but in 3D perspective some are just way up and down(non-flat)
View 9 Replies View RelatedAutoCAD 2010 :: How To Flatten Entire Drawing
Sep 26, 2012I'm working on a drawing that was created by somebody else where certain lines have an elevation that is not 0. This means lenght calculations etc. dont work. Is there a way I can select all and make all elevations 0?
View 9 Replies View RelatedAutoCAD 2010 :: Flatten Doesn't Work Properly
Oct 22, 2013I'm using ACAD (2011) most of the time in 3D. I like to work that way and it goes really fast!
Now, sometimes I want to flatten my 3D drawing and show my obscured lines and make them dashed afterwards. With the flatten command and explode it works fine... but... some lines just move! For example, a block with size 100,200,100 turns into a square with size 100.9 x 199.3, even if I use the command in 100% top view!
3ds Max Modeling :: How To Flatten 3D Object
Dec 30, 2012how do i completely flatten an object to determine its true dimensions. I have a door for a car lets say is 1 meter ,yet with the complexity of the curves and angle of the panels on the door if it was to be made completely flat it would be say 1.4 meters. I want to achieve something like the iron man pic but for the door. I tried sticking it in Autocad and converted to 2D but the measurements where of.
View 5 Replies View Related3ds Max :: Use Flatten Mapping On Whole Object
Feb 9, 2014I have got some problem with the UV map. I tried 2 method: use Flatten mapping on the whole object, and the other: separete the UV parts manual with Projection, and this work correct, but when i go far with the camera the UV shape will be visible. I want to use my model for a game and it will be more visible.
View 3 Replies View RelatedAutoCAD 2010 :: Placing 3D Object Raised On Surface Of Another 3D Object
May 2, 2012I've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
AutoCAD 2010 :: Select Object And Pan To Another Selection - First Object Deselects
Jul 20, 2011When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 Replies View RelatedPhotoshop :: To Flatten Or Not To Flatten --
Mar 4, 2006I am learning about CS2 now.
Is it best to flatten my images once I get them completed or is it better to keep them in psd format with the layers intact. What are the pros and cons (other than file size of course).
Photoshop :: To Flatten Or Not To Flatten...
Jul 5, 2008do you flatten your layers when finished? PSD files are huge and flattening seems to compress the size.
Also, if you do flatten, can you open them up again to make further adjustments?
AutoCAD 2010 :: Object Enablers
Nov 12, 2012I'm running Autocad 2011 another trade has upgraded to Autocad MEP 2013. I can't seem to figure out wich object enabler to download so I can see his light fixtures and equipment in my drawing, been at it for 2.5 hrs with no luck I'm raising the white flag
View 2 Replies View RelatedAutoCad :: Object Transparency In 2010
Mar 12, 2012I've created a block that uses a solid hatch acting like a wipeout field. In 2012, you can change the system variable TRANSPARENCYDISPLAY to <1> and it will make this hatch transparent. However, apparently that sysvar doesn't exist in 2010...
I don't want my other guy to have to look at these big white spots, on top of which he has to edit text!
AutoCAD LT :: 2010 Object Selection Broken?
Oct 2, 2013I cannot get the advanced select objects tools to work.
I type:
select <enter>
wp <enter>
Make my polygon, and then I'm stuck in a single item select mode. If I hit enter, they all unselect and I can't do anything. Typing a command (like "m") does nothing.
Typing m <enter>, and then doing the selection yields the same result. At the end of my selection process and I hit <enter>, it sits in the single object selection mode (the little box cursor). Hitting <enter> here again makes the selection dissapear and I'm back to square one.
AutoCAD 2010 :: Object Selection Property Box
Mar 6, 2012every time I select something a small box pops up in my way with the object's properties. I can't figure out how it became turned on, and don't know how to get rid of it.
View 4 Replies View RelatedAutoCAD 2010 :: Hidden Lines With 3D Object?
May 7, 2012Can I get AutoCAD to show hidden lines from a 3d drawing created in AutoCAD 2012?
View 2 Replies View RelatedAutoCAD 2010 :: How To Manipulate Object And Still Keep Its Area
Feb 5, 2013Is there a command where I can stretch an object and keep its Area. Like a baseball when hit turns into an oval however keeps its same mass.
Not like the Stretch command that infinitely stretchs an object.
AutoCAD 2010 :: How To Draw 3d Box In Dragging Using Object Arx
Mar 23, 2012how to draw 3d box in Dragging Using object arx.
View 2 Replies View RelatedAutoCAD 2010 :: OLE Object Link And Spreadsheet
Aug 2, 2012I WANT to break a link between an OLE object and the spreadsheet. I check drawings from several subcontractors to make sure they meet the clients standards before submitting to the client. The client doesn't want any OLE objects in the drawings but the subcontractors occasionally use them. What is the easiest way to break this link? The client wants AutoCAD entities only such as lines and text.
View 3 Replies View RelatedAutoCAD 2010 :: Selecting Object To Move?
Feb 15, 2012I am using autocad 2012 new.. i hav problem with MOVE!
i am selecting an object to move but rather than moving it alone its moving like stretch!
AutoCAD 2010 :: Selecting An Object Or A Portion Of Dwg
Jan 26, 2013Virtually all coordinate entry as well as many other tools and operations reference the current UCS. 2D tools.
Absolute and relative coordinate entry Absolute reference angles Definition of horizontal and vertical for Ortho mode, polar tracking, object snap tracking, grid display,and grid snap Orientation of horizontal and vertical dimensions Orientation of text objects View rotation using the PLAN command
Moving or rotating the UCS can make it easier to work on particular areas of a drawing. However when selecting an object or a portion of the dwg. crossing - window , (a good exemple is stretching) the selection of the area is still 'rectangular' from the ortho of 0° or 90°. This cross-window selection should follow the direction of the ortho angle selected. Is there a command or a setting in order for this operation to take place? IF NOT for future autoCad releases or a update for current releases should be reviewed and implemented
AutoCAD 2010 :: Hole In An Extruded Object
Jun 27, 2013I need to make a plate 12"x12", 1" thick with a 3" hole in the center.
How do I "remove" the hole?
AutoCAD 2010 :: Volume Of Solid Object?
Apr 4, 2012Is Autocad have a command to calculate the volume of a solid object? If so, it would come in handy at times.
View 1 Replies View RelatedAutoCAD 2010 :: Direct Entry On 3D Object?
Jan 20, 2012Using Acad release 12. Have there been any fixes to direct entry. Draw a 3d 6" cube. On the top surface draw a 2" line from a corner by moving your curser in the direction you wish to go, direct enter 2". It will be a 3" line. Move with direct entry also does not work when placing an object on an object.
View 7 Replies View RelatedAutoCAD 2010 :: Arrayed Object Disappears
May 3, 2011i'm having problem with array tool in acad2012. i draw a line, type array and hit enter. i put everything normally and hit enter when it says Enter to accept. then the line and arrayed object disappears. i don't know what's wrong with it. layers and everything is just as usual.
i did some other arrays in the same file before and they are working with no problem.
AutoCAD 2010 :: Change Linetypes Within Certain Object?
Mar 18, 2013Is there a way to change linetypes within a certain object?
EXAMPLE:
I want to show hidden lines under another object.
So far, what I do is trim the existing lines and draw new ones with a new layer.
AutoCAD 2010 :: Object Snaps Don't Actually Connect
Jan 4, 2013After working for a short time in 3D, my object snaps dont actually connect to any visible corners or points on the item I have chosen to edit or move. The triangle or square appears further from the point I select. The only work around is to close down the program and restart. After only a few transactions, the problem starts again.I have checked the system and found it is using the latest driver.
View 6 Replies View RelatedAutoCAD 2010 :: Rotating 3D Object Until Interference
Jan 11, 2013I'm working on a drawing which requires me to rotate 3D rectangles until they are leaning against each other like dominos. Because they are standing on a curved path only one top corner of each will touch the adjacent rectangle, and because each one is shorter than the last the point at which they touch is different every time. There are over 40 rectangles.
I have no problem picking the correct axis of rotation for each but I want to avoid time-consuming calculations for the angle of each or the reference Point for each. Ideally I'd like AutoCAD to rotate until it recognizes that the solids are interfering.
Is there a command or a LISP for this?
AutoCAD 2010 :: How To Delete Object Or A Line
Feb 13, 20111. AutoCAD 2011, new user & new install. I’m going throught the tutorials and have lost ability to repeat past ability to do tasks. One being to highlight an object and then delete using the Delete key. Second example being lost is to left click a drawn line and then to hit delete. Is this a setup problem?
View 4 Replies View RelatedAutoCAD 2010 :: Object Snaps Have Disappeared?
Nov 28, 2013Recently my Object Snap (F3) stopped working. Object snap is turned on and i have selected what i want to snap to in the options (OS) tab but it doesnt seem to be working.
I have also selected Tracking (F11) which is working fine.
What can i do? I am running AutoCAD LT 2010
AutoCAD 2010 :: Scaling Object In Just One Direction?
Dec 8, 2011I am a beginner for CAD Drawing and a want to scale an entire drawing in just one axis without modifying the dimensions in other.
scale the attached drawing document along X axis by reducing the lenght to be fit into an A4 sheet. Without compensating the markings' visibility.