Recently my Object Snap (F3) stopped working. Object snap is turned on and i have selected what i want to snap to in the options (OS) tab but it doesnt seem to be working.
I have also selected Tracking (F11) which is working fine.
What can i do? I am running AutoCAD LT 2010
After working for a short time in 3D, my object snaps dont actually connect to any visible corners or points on the item I have chosen to edit or move. The triangle or square appears further from the point I select. The only work around is to close down the program and restart. After only a few transactions, the problem starts again.I have checked the system and found it is using the latest driver.
View 6 Replies View RelatedAt work, I notice that some of the newer draftsman (Me and about 3 other who have been there for 1-4 years) tend to prefer AutoSnaps on in some capacity and those who have been there for 7+ years tend to leave it off.
This has got me thinking about whether people prefer having AutoSnaps on in some capacity or another at all times.I tend to leave on End Point, Mid Point and Intersection on at all times, and just use CTRL + Right click to adjust as necessary.
I am trying to use object snap (intersection) to position the end of my sample lines at the intersection of the sample line with a polyline. The object snap works with sample lines left of the alignment centerline but not on the right. How do I correct this?
View 2 Replies View RelatedA lot of the LISP routines we use turn off all snaps except the "nearest" snap when the routine is complete.
I draw with 6 out of the 10 snaps on (not the nearest).
LISP routine that loads specific object snaps?
Sometimes it works. Lately it rarely does. I have tried holding the command key and this does nothing. Why can I not move objects anymore.
View 3 Replies View RelatedI just popped off to a meeting, and when i returned the Object Browser has disappeared from my screen and i can't get it back. Where it might have gone or how i can get it back.
View 9 Replies View RelatedI've been trying to incorporate my menus and toolbars into the ribbon environment. I skipped acad 09 so this hasn't been fun. I used the transfer feature in the cui environment to get everything I wanted. I go to 2d environment to check that everything is there and it appears to be there. I load my cui and I get my icons and menus but no ribbon. I have a big message that says, "The Ribbon does not have any tabs or panels currently loaded." I type ribbon to load, but nothing.
I've now messed with this enough that even with the base acad.cuix file I still don't have the ribbons.
I have a layer VPORTS. I create viewports in this layer
On a 10 sheet drawing. viewports are visible and selectable on 9 sheets. Only one sheet they have dissapeared
I cannot select or edit vports on this one sheet
I have rebooted.. turned on and thawed all layers.. can see the viewports on sheets 1 thru 9 and edit them but not on sheet 10
I spent quite a bit of time a while back creating a custom tab panel, which displayed a collection of Lisp macros and other commands. It was set up to roll up out of sight when not needed, to give me back on-screen real estate. It has now vanished for no apparent reason. I am the only person using this machine, so I don't think it's related to any issue with changing profiles.
When I take a look inside the CUI interface I see that this tab and panel are configured with a "yes", indicating that they should be shown as part of my workspace. I've unlocked the on-screen CUI display before going to the CUI dialogue. I've also manually turned off the display of this tab and panel, then turned them on and hit "apply", before exiting the dialogue, all of this to no avail.
When I click on the arrow on the Menu Line the show ribbon choice is "greyed out" How can I fix this to display ribbon when I open ACA 2010.
View 2 Replies View RelatedI have a big drawing and some Mtext from a text layer just disapeared from model space. If i switch to a Layout the text is visible in the layout view and I can select it in a floating viewport, but when I switch back to model again I do not see it.
I added new text in model where missing and now in the Layout I have duplicates, the old one and the new one.
If i try to copy/paste the missing text from a previous version of the drawing, the text just doesn't paste, is not visible.
I've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 Replies View RelatedIf I overlay a PDF into a DWG is there a way I can use snaps to line up the PDF on my drawing?
View 4 Replies View RelatedIm running MEP 2013 and I shut off all of my osnaps including 3dosnaps..But one stays on...Its the connectors on MEP objects...How do I shut off those snaps as well?
View 3 Replies View RelatedWhen working in 3d the crosshairs seem disappear off the screen when i have zoomed in too far, as iff the crosshairs are located on 0 in the z access.
Also, and this could be related, when i try to snap to anything in the vertical it always snaps to 0 in the z axis. This makes it impossible to move anything vertacally by snapping.
Win 7 Pro 64bit, Dell Precision M6500
I'm constantly picking the 'none' snap when i mean to pick 'nearest'. I want to delete 'none' from my list of snaps that come up when i click the middle mouse button. how is this done?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I have just upgraded to 2013 from 2012. When dimensioning my viewports in paperspace, I will snap using the linear or aligned dimension and it will appear to snap to the first point, but when I snap on the other end, it will go somewhere way off the viewport or give me a "0" dim.
View 1 Replies View RelatedI seem to recall being able to do this in 2013...
Say you've dimensioned something but end up wanting to change the dimension definition points...drag the end point to another location that you want dimensioned.
I thought it used to snap to a new location, but now it will not. I have to redraw the dimension (including all text I added).
Here is what I get when I try to move the dimension definition point:
Here is what I get when I try the auto-reattach feature in "repair". Still nothing to snap to.
Sometimes corner snaps in sketch mode will turn off. why does this happen and how do I fix it?
View 1 Replies View RelatedSo I have a proposed storm sewer pipe network and 90% of pipes snap to the structures fine, with a start/lengthen snap on one end and an end/lengthen on the other, and a location/pipe diameter one in the middle. When I go to draw one of the pipes though, I draw structure to structure and it doesn't sit properly. I click on it to make sure it snapped to the structure but there is no start, end, or lengthen snaps on either end of the pipe. Only a Location/Pipe Diameter one in the middle. Therefore, I cannot manipulate it's length or where it connects, I can only move it around from the center.
View 5 Replies View RelatedWhat is the osmode bit that toggles off the running snaps... but leaves the underlying user running snaps settings un-effected?
View 4 Replies View RelatedI'm stuck with the attached drawing, was trying to get the right (side) view of the part constructed with lines and snaps/offsets are fighting me.
View 4 Replies View RelatedIs there a way to move a solid part in an assy using grip snaps and a specific vector direction .
Please look at the attachment,here you will see a gusset positioned on top of a foot plate,the gusset needs to be moved so that it makes contact with the cylinder,it will then be welded. The problem is more difficult because the gusset is offset to the axis of the cylinder and the precise distance is unknown unless worked out using trigonometry.
The question is what is the best method of moving the gusset to the precise distance and direction ?
I am trying to rotate the cylinder 90%%d on the y axis and then position it so that the bottom of the cylinder is flush with the top of the plane denoted by the rectangle. How is this done in 3DS Max?
View 1 Replies View Relatedsnapping to the pixel grid. I even have the "Snap to Pixel" turned off and the vector paths are being altered by illustrator so they visuall fit in the pixel grid. I've never experienced this before where illustrator actuall moves the anchor points where it wants.Here's a vector path on a grid created to show where the pixels are:
I select the object, swap the FILL to the STROKE and right away you can see that illustrator altered the location of the paths.I swap the STROKE back to the FILL and it alters the paths even more!Here's another example:
The paths clearly are not aligned with the pixel grid, but illustrator is trying everything it can to make the pixels line up. (This graphic has "Align stroke to inside" and is in pixel preview). Same thing but not in pixel preview.I made sure snap to grid and snap to pixel is turned off and still to no avail.
I've been using flatten for a long time and I just noticed that after flattening an objects sometimes it doesn't give you the exact shape of an object. Is there a reason why?
View 1 Replies View RelatedI'm running Autocad 2011 another trade has upgraded to Autocad MEP 2013. I can't seem to figure out wich object enabler to download so I can see his light fixtures and equipment in my drawing, been at it for 2.5 hrs with no luck I'm raising the white flag
View 2 Replies View RelatedI've created a block that uses a solid hatch acting like a wipeout field. In 2012, you can change the system variable TRANSPARENCYDISPLAY to <1> and it will make this hatch transparent. However, apparently that sysvar doesn't exist in 2010...
I don't want my other guy to have to look at these big white spots, on top of which he has to edit text!
I cannot get the advanced select objects tools to work.
I type:
select <enter>
wp <enter>
Make my polygon, and then I'm stuck in a single item select mode. If I hit enter, they all unselect and I can't do anything. Typing a command (like "m") does nothing.
Typing m <enter>, and then doing the selection yields the same result. At the end of my selection process and I hit <enter>, it sits in the single object selection mode (the little box cursor). Hitting <enter> here again makes the selection dissapear and I'm back to square one.