I'm constantly picking the 'none' snap when i mean to pick 'nearest'. I want to delete 'none' from my list of snaps that come up when i click the middle mouse button. how is this done?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I am trying to use object snap (intersection) to position the end of my sample lines at the intersection of the sample line with a polyline. The object snap works with sample lines left of the alignment centerline but not on the right. How do I correct this?
View 2 Replies View RelatedSo I have a proposed storm sewer pipe network and 90% of pipes snap to the structures fine, with a start/lengthen snap on one end and an end/lengthen on the other, and a location/pipe diameter one in the middle. When I go to draw one of the pipes though, I draw structure to structure and it doesn't sit properly. I click on it to make sure it snapped to the structure but there is no start, end, or lengthen snaps on either end of the pipe. Only a Location/Pipe Diameter one in the middle. Therefore, I cannot manipulate it's length or where it connects, I can only move it around from the center.
View 5 Replies View RelatedI created a command that I no longer use. I actually made a spelling error upon creating it "SUPECLOSE" and I want to delete it.
This is how I created this command: I typed in ALIASEDIT in order to add a new alias to a command.
I then clicked on the "Add" button.
In the "Alias:" field, I typed in "xx"
And in the "AutoCAD Command:" field, I typed in "SUPECLOSE" - which isn't actually an autoCAD command. "SUPERCLOSE" is the command I use to run a custom LISP routine that I created. Upon hitting pressing "OK" to this, AutoCAD prompted me with: "'SUPECLOSE' is a new command, Do you want to add this to your list of commands?"
I said yes. And then shortly afterwards realized the spelling error I had made. Problem is...I don't know how to access this list and delete the new command that I had just created (which does nothing).
As I was creating a surface consisted of contour lines, suddenly some bunch of random points in the surface were also created. I want my surface to be solely generated by contour lines only. So...
I know I can get rid of those points by deleting them through edit but I want to get rid of them all at once. How can I do that? Or... Is there even a way to do that?
In using 2013 I noticed when I delete a feature line which is added to a surface as a breakline it does not delete it from the surface. Even after a rebuild the surface does not update. I am having to go into the toolspace and manually delete the breaklines from the surface list.
View 2 Replies View RelatedI am unable to either modify or delete the corridor named "Road" in the attached file. When I try to modify or delete that particular corridor, the program freezes and in task manager the program is “Not Responding”.
View 6 Replies View RelatedI just began learning AutoCAD Civil 3D 2014. I inadverdently entered an extra survey name in the survey databases. I cannot find any way to delete an entry that I don't want. This entry is in the "Survey" tab in the toolspace. I tried to start a new drawing in hopes it would give me a clean toolspace, but it keeps showing the same information.
View 2 Replies View RelatedWe are just starting to use the pay items through QTO Manager & Takeoff. Everything was working fine until...I deleted a hatched area that represented a Butt Joint quantitiy. Now when I go into Compute Quatity Takeoff & select the Compute button, this quantity that was deleted is still there. And, since it is now deleted, I can't find a way to remove it from the Butt Joint quantity. I've tried using "Removes pay item from specific objects." I've tried deleting all my quantities and starting from scratch.
View 2 Replies View RelatedI have a Drawing that I have been developing as a control/template for surveying purposes. In compiling it I have acquired some empty blocks from another drawing I picked some data from. They are not being used or referenced by anything in the drawing and yet PURGE does not get rid of them. Is there another method I can use?
Dell T1600 Workstation
Windows 7 x64
Intel Xeon E31280 @ 3.50 GHz
24 GB RAM
Nvidia Quadro 4000
Civil3D 2013
Am editting a clients file and have to remove the text style CT_Calibri_B.
Have tried using quick select and specifying the text style but this does not select anything.
How can I remove this text style?
Can I remove it if it is embedded in the file?
I'm trying to modify a surface I created using drill hole data of a cavern. When I select the delete lines command for surface editing a message pops up telling me that I must have the triangles displayed in the surface style dialog. But I do have the triangles displayed, and it still gives me the same message.
View 9 Replies View RelatedI am trying to delete a few rows in both my pipe table and my structure table but the 'remove items' button doesn't work.
View 2 Replies View RelatedIf I overlay a PDF into a DWG is there a way I can use snaps to line up the PDF on my drawing?
View 4 Replies View RelatedIm running MEP 2013 and I shut off all of my osnaps including 3dosnaps..But one stays on...Its the connectors on MEP objects...How do I shut off those snaps as well?
View 3 Replies View RelatedAt work, I notice that some of the newer draftsman (Me and about 3 other who have been there for 1-4 years) tend to prefer AutoSnaps on in some capacity and those who have been there for 7+ years tend to leave it off.
This has got me thinking about whether people prefer having AutoSnaps on in some capacity or another at all times.I tend to leave on End Point, Mid Point and Intersection on at all times, and just use CTRL + Right click to adjust as necessary.
When working in 3d the crosshairs seem disappear off the screen when i have zoomed in too far, as iff the crosshairs are located on 0 in the z access.
Also, and this could be related, when i try to snap to anything in the vertical it always snaps to 0 in the z axis. This makes it impossible to move anything vertacally by snapping.
Win 7 Pro 64bit, Dell Precision M6500
After working for a short time in 3D, my object snaps dont actually connect to any visible corners or points on the item I have chosen to edit or move. The triangle or square appears further from the point I select. The only work around is to close down the program and restart. After only a few transactions, the problem starts again.I have checked the system and found it is using the latest driver.
View 6 Replies View RelatedRecently my Object Snap (F3) stopped working. Object snap is turned on and i have selected what i want to snap to in the options (OS) tab but it doesnt seem to be working.
I have also selected Tracking (F11) which is working fine.
What can i do? I am running AutoCAD LT 2010
I have just upgraded to 2013 from 2012. When dimensioning my viewports in paperspace, I will snap using the linear or aligned dimension and it will appear to snap to the first point, but when I snap on the other end, it will go somewhere way off the viewport or give me a "0" dim.
View 1 Replies View RelatedI seem to recall being able to do this in 2013...
Say you've dimensioned something but end up wanting to change the dimension definition points...drag the end point to another location that you want dimensioned.
I thought it used to snap to a new location, but now it will not. I have to redraw the dimension (including all text I added).
Here is what I get when I try to move the dimension definition point:
Here is what I get when I try the auto-reattach feature in "repair". Still nothing to snap to.
Sometimes corner snaps in sketch mode will turn off. why does this happen and how do I fix it?
View 1 Replies View RelatedWhat is the osmode bit that toggles off the running snaps... but leaves the underlying user running snaps settings un-effected?
View 4 Replies View RelatedA lot of the LISP routines we use turn off all snaps except the "nearest" snap when the routine is complete.
I draw with 6 out of the 10 snaps on (not the nearest).
LISP routine that loads specific object snaps?
I'm stuck with the attached drawing, was trying to get the right (side) view of the part constructed with lines and snaps/offsets are fighting me.
View 4 Replies View Relatedmy C3D11 is having one hell of a time sorting survey points by description. I crash everytime I open a drawing, open a survey database, edit points, sort by description.
View 6 Replies View RelatedI want a list of all profiles in the drawing. How can i do?
I have a list of all alignments with:
ObjectIdCollection alignColl = civDoc.GetAlignmentIds();
But profiles don´t have the method GetProfilesIds();
or how to check if each alignment has any profiles?
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
When I pick a feature line, the property dialog would show Feature line, and list the information.
Now for some reason, I get aecc_feature_line and the property dialog shows a different list of information.
How do I get back to the Feature line list.
I would like show all alignments in a combobox. I want do a application in C#.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
Trying to get the cut/fill quantities by computing the materials & I'm getting confused.
I imported another criteria & for ground removed it has existing as below & my datum as above. For fill, it has the datum below & existing above. The cut/fill matches a comparison between the 2 surfaces, but I just want to make sure I'm doing it right. Explain why for cut the datum's set to above & for fill it's set to below,
What setting/toggle needs to be turned on to preview the list of parcels in a site? I have a user who clicks on the parcels heading in his site and doesn't see a preview of the list:
Don't deal it as parcel preview when you actually click on the name of the parcel. That I do know how to toggle on. We're just looking for the list.
