I am unable to either modify or delete the corridor named "Road" in the attached file. When I try to modify or delete that particular corridor, the program freezes and in task manager the program is “Not Responding”.
View 6 RepliesI have created a surface from a corridor. I set the boundary of the surface to the daylight of the corridor. In some areas of the corridor the surface does not triangulate see attached.
View 2 Replies View RelatedCopy a corridor successfully? I'd like to try this just a little worried about the explosion of evil this may cause to my Civil 3D session.
Even all the properties of the corridor setup from one to another would be useful. I'm building one corridor and an 2nd one that matches everything except I need to replace my Assembly with one meant for stripping.
My corridor surface is not matching my corridor top links. see attachments. this is affecting my volumes!
The section-plan(surface red).png is showing the section editor and the plan view. the red highlighted line in section is the corridor surface and as you can see in plan view the surface is incorrect and wiggly.
The pdf is all my sections with the red linework being the corridor surface.
C3D ver 2012
Win 7, 64bit
I layed out a pressure netowrk horizontally using 6" pvc pipe. It includes some 45 degree bends and such and even some curved pipe. Now the engineer wants to adjust the alignment in the area of the curved pipe.
First of all the modify area in the ribbon on the plan layout tools for pressure pipe is an absolut joke. It lets me break a pipe (which deletes one end of it), move a pipe (but the attched pipes don't move), or slide a pipe (whatever that's supposed to do).
If I grip edit a curved pipe, this will not work. The curved and tangent pipes will now no longer be tangent to each other and when laying out an alignment on the pipe itself, the curves will not work correctly when going to stake it out.
We have been processing/adjusting our field control observations in an outside program (Star-net) and then importing the control into our C3D Database through an import event (PNEZD File). Once the control has been imported we import our field data (.fbk file) through an import event as well. The problem that we are having is once you process a .fbk that uses one of those control points it "locks" the control point, so the next day when we get another field download and the control is re-adjusted, we can't update the control points in the C3D Database.
The only way we have found to get our newly adjust control into the C3D Database is too delete all of the "import events" that use the control point and then import our new control. This is a HUGE hassle.
For my dimension style, I have my text placement set to over dimension line, with leader, so I can drag the actual text outside the dimension line with a leader attached when necessary, but when I try to move the text outside of the dimension line it always draws the leader underlining the entire piece of text that I have moved. Is there a way to control the leader to attach to the middle of the line and not underline the entire piece of text when doing this operation?
View 3 Replies View RelatedC3D 2014
when I created a Top surface, C3D showed me otherwise. I need a gap at an intersection. In the attached DWG the intersection corridor has been removed from view by isolate.
I used 2 seperate baselines to force the road corridor to have a gap at the intersection.
Looked OK .. except ..later .. when I created a Top surface, only the first baseline is used to create the surface, the second baseline is skipped : (
I obviously did not make a gap correctly. What is the correct way? Or.. is there no way .. must the designer create multiple seperate corridors when the road has gaps?
I have a very basic question about creating corridors. As you can see on the attachment, i created an assembly consisting of ditch and my own polyline subassembly and turned it into a corridor. The ditch part is drawn out correctly, but the other part (supposed to be a gravel road) has only sections in certain points.
View 4 Replies View RelatedI started playing around with 3d dwf's. I'd like to share my corridors in a 3d dwf viewer or something similar but when it opens in design review, everything is skewed/ jagged/garbled. The other problem is that it exports everything (assemblies, alignments, sections etc.) so it make viewing navigation difficult in the viewer for people that aren't CAD savvy to begin with. It would be ideal if you could select what you want to export similar to exporting a wmf file.
How do others share 3d models with non-cad people?
When i try to create a material list, i don't see my corridor surface - just the EG surface appear in the list.
View 2 Replies View RelatedWe are trying to edit a small portion of an existing corridor by adding a generic daylighting subassembly. The add subassembly tool in the Corridor Section editor works, but we get an error because the new sub doesn't have a target surface specified. how to add a target for a sub that is added after the corridor was created?
Civil 3D 2012 & 2013 & 2014
Toshiba Qosmio X505-Q890
2 x i7 - Q740 quad core CPU's
8GB of RAM
60GB SSD + 500GB HDD
NVidia GeForce GTS 360M - driver 8.17.13.0697
Win 7 Home Premium
When creating an alignment from corridor feature (ditch invert level), the created alignment is not following the selected line (see image bellow). The alignment seams to be created from the first point of the feature line to the last point and ignores all the other points. The vertical alignment created at the same time seams to be correct.
View 1 Replies View RelatedI am trying desperately to create a corridor in C3D 2013.
I have the requisite Alignment, Profile and Assembly, yet when I create the corridor, either nothing appears, or it creates the corridor at incorrect elevations. I have the proper elevations in my alignment.
I had a grading plan all set, with a corridor involved. Then, I received a new survey that I didn't know was coming. I need to move all of my elements to different coordinates. I can move everything except the corridor.
View 2 Replies View RelatedHow to get rid of this gap? Everything I have tried just causes overlaps.
View 1 Replies View RelatedI only get 2 choices when selecting corridor feature line to create profile - ETW_base, and ETW_sub. My Subassembly has 2 pavement sections, a base and subbase section. I need the top of pavement profile.
View 2 Replies View RelatedI have a corridor with intersection.The intersection isn't 90 degrees. Can I cut corridor with(for example) 45 degrees?
View 9 Replies View RelatedAs I was creating a surface consisted of contour lines, suddenly some bunch of random points in the surface were also created. I want my surface to be solely generated by contour lines only. So...
I know I can get rid of those points by deleting them through edit but I want to get rid of them all at once. How can I do that? Or... Is there even a way to do that?
In using 2013 I noticed when I delete a feature line which is added to a surface as a breakline it does not delete it from the surface. Even after a rebuild the surface does not update. I am having to go into the toolspace and manually delete the breaklines from the surface list.
View 2 Replies View RelatedI just began learning AutoCAD Civil 3D 2014. I inadverdently entered an extra survey name in the survey databases. I cannot find any way to delete an entry that I don't want. This entry is in the "Survey" tab in the toolspace. I tried to start a new drawing in hopes it would give me a clean toolspace, but it keeps showing the same information.
View 2 Replies View RelatedWe are just starting to use the pay items through QTO Manager & Takeoff. Everything was working fine until...I deleted a hatched area that represented a Butt Joint quantitiy. Now when I go into Compute Quatity Takeoff & select the Compute button, this quantity that was deleted is still there. And, since it is now deleted, I can't find a way to remove it from the Butt Joint quantity. I've tried using "Removes pay item from specific objects." I've tried deleting all my quantities and starting from scratch.
View 2 Replies View RelatedI'm constantly picking the 'none' snap when i mean to pick 'nearest'. I want to delete 'none' from my list of snaps that come up when i click the middle mouse button. how is this done?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I want to create a grade (without object grade) using a corridor. This is my assembly:
This only contains the sub assembly "DaylightBench" in the side right.
I have the alignment and profile. I have created the corridor.
red line= alignment
green line= feature line (code Intersecction) converted to polyline.
pink surface= surface (code TOP).
I have added a boundary for surface of type "add from polygon" and I have selected the closed polyline(green line).
However, the boundary seems doesn´t work.
Autocad Civil 3D 2014 +SP1
Quad Core Intel i7 3770-cpu 3.40Ghz.
ssd samsung 840 pro 512gb+ssd samsung 840 pro 256 gb+1tb hdd
32gb RAM 1600 Mhz.
nVidia Quadro 2000.
Win 7 Pro 64bit
I am trying yo model river corridor with 4 locks on it. On every locks different between levels is about 2-3m. I it is possible to create profile perependicular to bottom of river. How to create it?
Another question how to later connect surface. I mean Existing ground and corridor intersect. Ho to prepare later for render Existing ground with cutted corridor river? where I am below EG.
I have sevreal corridors with various spurs. The contractor wants the cut/fill volume in sections along the corridors, not one big cut/fill calc. Is there a way to do this in C3D? I have got the volume table with the chainages on, but he does not want a cumulitive figure for the whole corridor.
View 1 Replies View RelatedI am creating a corridor with a simple assembly. On my assembly, I have basic lane and daylight Multiple surface. My target is existing ground.
View 9 Replies View RelatedI am trying to create a surface from a corridor. I have a sub-assembly attached, which I believe is working correctly. I managed to create the empty surface and when I try to add surface data nothing seems to happen. I keep changing the specified code to Base which is my finished gravel structure and hit the + but again nothing seems to happen.
Ultimately I am trying to determine a volume between my corridor and original topo.
I need to design a project but ı cant..ı have two profiles in use for one alignment..ı want to use left profile for left side, use right profile for right side.and ı want to draw cross section only one..how can ı design like this project..
View 8 Replies View RelatedI want to add different assemblies (some with walls or ditches) along the same corridor at given stations
Can that be done?
We have created sections from our corridor. We see FG and EG, we can use bands for EG from surface. How do we get the FG band to show the elevations for FG? The only option we have is the EG surface. We have tried to create a surface form the corridor in the corridor properties but that surface still doesn't show up in the surface list in the bands. I would have thought this info would be dynamic and come directly from the corridor would it not?
View 3 Replies View Related