When using the 3DClip command, the mini screen no longer appears for me to complete this task. Also, about 50% of the time, my drawing will lock up or fatal error when trying to utilize the 3DClip command.
View 1 RepliesEvery time that I open a new drawing which has clipped XRefs, the X clip frame is set to the number 2, and I set it back to number "0", but then when I finish that drawing and open another drawing, then the new drawing reverts back to X clip frame 2.
How or where I can change the setting to the default is always "0"?
I am facing autocad-2014 error is "copy to clip board failed" entire drawing getting same problem,one particular file giving problem.
View 1 Replies View RelatedI use the 3DCLIP command a lot in my work.
What is really disappointing is that whenever a solid (or xref or block) is sectioned this way, it shows a back faces of that object. It makes the view messy and confusing, and then I have to use whiteout all over my paper space to make the drawing readable.
See attached PDF.
I did a :
pdfattach
pdfclip
both the frames
pdfframe 2
Displays but does not plot the PDF underlay frame.
frame 2
Displays but does not plot the frame.and this last one is the override for all frames but...on the printout a few thin lines of the clip (not all) but noting in the preview
When you clip an something from a file you insert, is there a way not to have the outline that you clip show?
View 1 Replies View RelatedAs often done in mechanical drawings, a circle is drawn around a detail in the main drawing, and the detail is displayed somewhere else on the drawing on a larger scale.
My detail is the small rectangle in the upper right corner of the larger rectangle. I have also drawn a dash-dot-dot circle object around that corner to designate the detail-area.
In layout 1 the top left viewport displays the "whole" drawing. I also created a circular viewport to display the detail on a larger scale.
In the circular viewport, I used zoom-to-object (and selected the dash-dot-dot circle). The result is visible :both circles (object & viewport) are still visible, and they are not concentric too.
I thought the zoom command would have zoomed until both circles overlapped eachother and were concentric...
Is it possible to record a video clip (avi/wmv/MPG) of free 3d orbit shaded animation what you see on autocad screen (without specifing particular path).
There are animation settings in 3dorbit right shortcut menu, but it doesn't have option for recording a video clip.
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
I attempted to copy with base point some blocks from one drawing to another and got a blue screen saying physical memory dump, and then my computer restarted. I tried the same thing using the insert as a block, but had the same problem. I am using autocad 2012
I'm running Windows 7, it says with 8gig ram, and video card is a Intel(r)hd graphics family. The computer is less than 2 weeks old.
how to change the splash screen? We are trying to change that replusive picture of robots and screens...
View 7 Replies View RelatedI need to edit the scales and add custom ones, but when i type _SCALELISTEDIT, nothing happens, I know that its selected as my layout isn't any longer, but I can't find the darn window where the scales are located. I've also tried using the menu as well. This is for ALL drawings. New and already created.
View 8 Replies View RelatedMy layout screen looks distorted. Here is the drawing, you will see the chairs and tables are off a bit in angle. I pulled up my view screen and the Z is at 1" which I don't know if that means anything, but it won't let me edit.
View 5 Replies View RelatedI can rotate my crosshairs by using ucs object, but how do I rotate all the objects in the drawing to be horizontal on my screen?
View 1 Replies View RelatedHow do you turn on/off the splash screen?
View 5 Replies View RelatedI have AutoCAD 2012.
When it launches, I get the following:
"AutoCAD requires 1024 x 768 resolution or higher to run"
I have a newer laptop (Dell Precision M6600: +/-Jan this year). The screen resolution is set at 1920 x 1080 (the recommended setting). On any other program, the screen resolution is fine, everything works.
If I try to launch AutoCAD, the screen takes on a noticeably lower resolution to the point where I can not select commands from the screen, some commands don't "fit" and are therefore missing. It took a while to figure out how to even close out of the program to go back to other versions that work.
I Have several PC's with 2011..On some machines the layer transparency is not working anymore on screen.90% transparency red is normally light pink but on some machines with the same drawing and the same settings it is 100% full red.A few day's ago there was no problem on those pc's
View 4 Replies View RelatedWe have several tool palettes that I use all the time. And every time I close down AutoCAD and open it back up, all the palettes load back up in the middle of my left monitor (dual monitor set up). I typically have my AutoCAD window open on the left monitor, and my palettes on the right monitor.
I have tried to save my profile, lock all Toolbar/Palette positions.....and nothing has any affect. My palettes always load in the middle of my left monitor.
I tried loading the latest graphics drivers, no affect.
When I try open AutoCad, at first it loads fine, doing all the pulg ins and that, then just stops.
The text in the corner just says "Loading", and I've left it for hours an it really isn't.
I cannot get the Full-Screen Tracking Vector to display. I toggle the button in Options>Drafting and hit apply, but nothing. Help says that the Track path System Variable should be = 1, but when the button is on, the Variable = 0. If I set the Variable = 1, it shuts the button off.
View 2 Replies View RelatedIn my drawing I have set my UCS to a gridline (I'm drawing up a survey from a construction site), named the ucs 'square' and then set Plan view to Current so that it is nice and square to the screen. I saved the drawing in this plan view.
However, when I reloaded the drawing this morning, my 'square' plan view has become 'World'. Also my 'square' UCS has disappeared from the list of UCS's. I thought this was just a funny bug so I typed 'UCS' followed by 'w' hoping the world UCS would go back to the real one, but nothing happened. As far as I know it is not possible in ACAD to rename, alter or in fact do anything to World UCS (for good reason), but this is what ACAD appears to have done all by itself.
Luckily I have all the site gids saved in their 'world' orientations so I can get round it by a simple bit of copybase/paste/rotate, (but it means my dimension text is all going to be skewiff).
As a caveat I should add that I am a very exprienced ACAD user (7years) and regularly work in 3D in all kinds of views and UCS's and I've never had this happen before.
Every few weeks when opening a drawing, my computer restarts (just plain crashes windows and it restarts automatically). This only happens using AutoCAD, no other program has done this as of yet. I have no service packs installed and I haven't seen another post that refers to this problem. When I click on "Check for solution", nothing comes up.
View 8 Replies View RelatedWhy do the dialog boxes and right click menus disappear underneath AutoCAD 2012? It does not happen every time, only most of the time. I can roll the mouse pointer over were the box or menu is supposed to be and some of the buttons and textboxes will reappear but not all.
View 3 Replies View RelatedI am getting below
6432 2013/02/01 15:56:44 Reason=Fatal error
6432 2013/02/01 15:56:44 ComputerName=RAMANJS-01
6432 2013/02/01 15:56:44 OS=6.1.7601.Service Pack 1
6432 2013/02/01 15:56:44 File=AdlmIntSATSLicense.cpp,Line=416
6432 2013/02/01 15:56:44 VendorID=2 [ADLMACT]
6432 2013/02/01 15:56:44 VendorError=101 [The license cannot be accessed/loaded/opened]
The company I'm with recently updated their settings across the network. Now, when I step away from my computer for longer than 10 minutes a screen saver automatically comes on. Upon entering the password and getting back to the desktop, AutoCAD comes up with a FATAL ERROR:
Unhandled Access Violation Writing 0x0000 Exception at 54122e86h
I cannot disable the screensaver, I'm running AutoCAD Mechanical 2011 (updated with SP2); Windows XP Pro SP3, 3.25 GB RAM, Matrox M9128 LP PCIe x16 (Latest Driver) dual monitors.
For some reason, my autocad application will not display the text type on screen correctly. This began on Friday of last week (10/19), and remains today (10/21). It is not simply one drawing file, but all drawing files that I open. When I initiate the MTEXT Editor, the correct font appears, but not in the drawing window.
View 1 Replies View RelatedThe “window selection” selects only what appears on the screen! I wanted to select a page number located on the lower left corner of each title block of each drawing but found out that the “window selection” doesn’t keep selecting what doesn’t appear on the screen (if zoom in is applied)! For example, if I select a number of drawings and “zoom in” is applied then the window selection will only keep selecting what appears only on the screen!
Then how to let the “window selection” keep selecting all the objects regarding whether they appear on the screen or not?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
However, rendering seems to be hit or miss with me. Sometimes autocad will render objects and then, all of a sudden, rendering produces a blank black screen.
View 1 Replies View Related~ I want to purge the color yellow from autocad. ~
Is it possible to override all the colors of an existing *.DWG to a Monochrome Format? I want to be able to open any autocad file and veiw everything in black and white IN MODEL SPACE.
I am not interested in 'changing layer colors' or 'manually changing blocks to the right color.' Right now, I explode the entire drawing (several times depending on how deep something is grouped) and change the color to by layer, but sometimes blocks become contaminated and lose all their data. (In addition, I am not interested in plotting in Monochrome.)
If this task is impossible, is it possible to change the definition of the color "yellow." What I mean by the previous statement is to trick autocad into thinking it is using 'yellow' when it is actually using a different color. Sort of like an induced color blindness.
SUMMARY: I don't want to change a color FROM yellow, I just don't want yellow TO EXIST.
i just installed the 2012 autocad on my laptop and everytime i use trim or rotate or anything else the screen just goes black and the computer freezes for a few seconds and then it comes back and tell me that its trying to adjust the program with the monitor but it never ends and it keeps doing the same thing. btw my laptop specs are: windows7 home premium, intel i5, 6gb ddr3, intel HD3000 graphics.
View 3 Replies View RelatedWe recieved some drawings from a client for updating. The Pneumatic, System Link and Heat Trace lines all show up solid in the drawings when I open them up in AutoCAD 2012. We tried opening them in AutoCAD 2004 and are experiencing the same issue. In the Linetype Manager menu, under Description, the linetypes appear correct. Under Appearance, Heat Trace and Pneumatic appear solid and System Link appears dashed (just as they do in the drawing itself).
Here's the kicker. A co-worker has AutoCAD 2004 on his laptop and everything shows up and plots out just fine.