AutoCAD 2010 :: Linetypes Showing Up Solid (on Screen And When Plotted)
Oct 15, 2013
We recieved some drawings from a client for updating. The Pneumatic, System Link and Heat Trace lines all show up solid in the drawings when I open them up in AutoCAD 2012. We tried opening them in AutoCAD 2004 and are experiencing the same issue. In the Linetype Manager menu, under Description, the linetypes appear correct. Under Appearance, Heat Trace and Pneumatic appear solid and System Link appears dashed (just as they do in the drawing itself).
Here's the kicker. A co-worker has AutoCAD 2004 on his laptop and everything shows up and plots out just fine.
View 9 Replies
ADVERTISEMENT
Dec 28, 2012
im not too hip with shapefiles/linetypes. but here is my current situation. everything was working fine for the past 2 weeks since our civil2013 install. yesterday i started a new drawing with our template, and now our linetypes are just dashed lines. its not loading the x's for fences, or any of our other custom shapes. i opened an old drawing which was working fine, and it now has the same issue.
the support file path is pointed to a local folder which contains a customised .shx file made by a previous employee here.
View 9 Replies
View Related
Jul 6, 2012
I can't remember the option how to change the display of linetypes to show as solid instead of as two lines. I think this may be something to do with the 'solidfill' option.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
View 1 Replies
View Related
Sep 5, 2012
After a recent installation of updates I now have the drawing network path being plotted on every drawing and plotter used. How can I disable this?
View 1 Replies
View Related
Dec 29, 2012
I am a draftswoman have been using Autocad for doing my family tree, but i am having trouble reading the PDF's outout when printed at a high DPI. I've attached copies of the same part of the screen printed at 150 DPI, when its clear and readable, and at 2400 DPI when it goes all faded and unreadable. But there are occasions due to some graphics that its better for me to print at 2400 DPI. is there any way of improving the text printed at the higher DPI to make it clearer and readable?
View 2 Replies
View Related
Oct 15, 2013
Same drawing (attached) with identical settings printed on one PC using DWG to PDF - creates this:
on another PC this:
So, some angle and aligned length dimensions are mirrored.
PDF previewed with Adobe Reader and Foxit PDF reader.
File is created and printed in 2010 LT, hence no UCS rotation, text style and print settings unaltered.
View 5 Replies
View Related
Nov 1, 2012
How do you get an xref to appear faded when plotted onto paper?
I tried putting the xref's on their own layer and adjusted the transparency level.
View 1 Replies
View Related
Jul 12, 2011
We (several people at my company including myself) are having a problem where we set up sheets for plotting in paperspace that include multiple viewports. Often, the projects require us to use irregularly shaped viewports (i.e. not square/rectangular). When we print the sheets to our plotter, to PDF, or to any other printer, the page looks fine. However, if we print them to DWF using the DWF6 ePlot.pc3, the viewports will square off, allowing items that were not supposed to be shown outside of the viewport to come through. This has caused extra information to show up across our sheets, making portions of them unreadable.
We are at a loss on how to work around this, beyond only using square/rectangular viewports. Is there a way to get the DWFs to match what we can get out of other plotters?
View 5 Replies
View Related
Feb 8, 2011
Using 2011 with a PDF underlay. When the drawing is plotted as a PDF and the new PDF is opened, parts of the PDF portion of thew drawing are green. Changing the transparency, contrast, fade etc. of the underlay hasn't worked. I don't want to save the PDF underlay as an earlier PDF version because I'm snapping to parts of the underlay.
View 7 Replies
View Related
Jun 29, 2012
Is there any way to have 3d polylines show a linetype? I need to have my contours that are created as a 3d polyline show up as a hidden linetype. These polylines came from an aerial mapping and have lots of vertices.
View 5 Replies
View Related
Sep 16, 2013
How can I remove the lines in the middle after I press and pull the objects.
Attached is the Untitle.jpg, to make more clearer to you. Blue is the wall and skyblue is the aquarium. I want the back and the front of the aquarium don't have any line in the middle but even I do shade command the fill of the color is still there. Cause if I explode and delete the line in the middle the colors that fill the aquarium are getting rid off See Untitled 2.Jpg to see what I mean. And also how can make the aquarium Untitle 3.jpg transparent?
View 9 Replies
View Related
Mar 21, 2012
Today I noticed 6 or 7 linetypes that have appeared in every drawing I open and cannot be deleted.
They include "Amzigzag" " Amconstr" "ACISOTGB" and others.
If I delete everytjing in my drawing and purge the linetypes are still there. They even appear if I load old drawings that din't have these linetypes initially.
Inventor 2013
View 2 Replies
View Related
Feb 26, 2013
For some reason all of my linetypes have disappeared, and even when I go to Load, there are no options. The only linetypes available are lines and dashed lines, and I have a fence linetype but it does not show the circular pattern in the fence. How can I get these back?
View 1 Replies
View Related
Jul 16, 2012
Ok over the years here they currentley have lots of differnt custom linetypes scattered over lots of drawings. What I am trying to achieve is to drive some standardization here
So what i want to do is create a series of standard drawings with various custom linetypes
So using design centre i can drag and drop linetypes into a standard drawing but what i really want to do is export these custom linetypes into a .lin file
is it possible to do this ?
View 2 Replies
View Related
Dec 27, 2013
I have a drawing that have blocks in them I cant find inserted. I cant purge them or the linetypes they have. How do I strip them out if I cant find them to explode them?
I have attached the file.
View 9 Replies
View Related
Mar 18, 2013
Is there a way to change linetypes within a certain object?
EXAMPLE:
I want to show hidden lines under another object.
So far, what I do is trim the existing lines and draw new ones with a new layer.
View 3 Replies
View Related
Apr 11, 2012
I need to create a complex linetype for a fence. The line needs to consist of the following:
------X------X------X----- The linetype needs to be dynamic to any length.
View 9 Replies
View Related
Oct 19, 2012
How do I remove unused linetypes from drawing
View 3 Replies
View Related
Oct 22, 2013
If I start autocad and draw a line then change its linetype from continuous to Fenceline2 it shows up like it's supposed to, a line with small squares in it. I can also change it's linetype to Fenceline1 and the linetype shows up just fine with the line and small circles in it.
But when I call up some existing autocad drawings that have lines with the Fenceline1 or Fenceline2 linetypes assigned to them, the small boxes or circles are missing from the linetypes. When you type linetype at the command prompt the linetypes are listed in the dialog box, but for some reason they are not showing up right in the existing drawing. When I type linetype, and hit the load button, and browse to my acad.lin file and select it, I get an error message of Bad Definition for linetype Fenceline1 and another for Fenceline2 and another for Batting etc.
So why are these Complex linetypes not working in the Existing drawing but work fine in the just call up autocad empty drawing, and how do I fix them to work in the existing drawing?
View 3 Replies
View Related
Jul 24, 2012
I can not get certain linetypes to start with the same dash length, see attached. The linetype will start with a longer dash then the stated length, depending on the length of the pline segment. Is there a way to fix this?
Here is the code for one of the linetypes highlighted:
*FENCELINEc,EX FENCE X---X---X---X---X---X---X--
A,.125,-.0625,.125,-.0625,.125,-.0625,.125,-.125,[FENCEx,FENCEx.shx,x=-.025,s=.1],-.0625
View 4 Replies
View Related
Jul 17, 2013
We have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.
We have tried this method in getting rid of them but it doesnt work. [URL]
See attached file.
Same applies with the text styles.
View 9 Replies
View Related
Jun 27, 2012
We have recently noticed that after printing a PDF of a drawing I plotted from AutoCAD we are coming up with differences when we double check the scale on the printed hardcopy using a carpenter ruler.
For example, there is a dimension labeled on the drawing of 200 ft. However, if I try to scale this out with a carpenter's ruler at the drawing was set to (say for instance it is 1 inch = 100 ft) I am coming up short of the 2 inches it should be (typically come up around an 1-15/16" or around 194 feet, approx 97% of the correct amount).
In the Page Setup Manager in AutoCAD, I have the following options selected (see the print screen as well):
Printer/plotter selected: DWG to PDF.pc3
Paper Size: ANSI full bleed B (11.00 x 17.00 Inches)
What to Plot: Layout
I don't have a plot scale scale other than the default 1" = 1'
No plot style selected
Then, on the print menu when I open the PDF that I have exported from AutoCAD, I have the following settings (see the print screens I have attached):
Printer: The printer I use (Konica Minolta c650 Series PCL)
And I have selected the Options "Auto Rotate and Center" and "Choose paper source by PDF page size**"
** Note, that I have tried unselecting the "Choose paper source by PDF page size" option and accordingly changed the paper size in the "Page Setup..." button at the btoom to match the document size (i.e. 11.0 x 17.0in) and it gets the difference to be closer (i.e. I now get 198 ft but some of my border gets cut off). See the print screen below for this a print screen of the print menu and sub-menu of Page Setup showing the paper size selected.
I saw that some people in other forums state that there is no real solution when trying to scale off of PDF's and that there should be a disclaimer saying as much if you are to send the file out to a customer who may rely on doing some in the field scaling from the printed copy of the PDF file. I find it hard to believe there is no solution as we have received some drawings from others whom the scaling works just fine.
View 3 Replies
View Related
Mar 12, 2012
I created some custom linetypes. When I copied them over to my drawing, the text in the linetypes came in extemely large. I really need to get this figured out as I am setting up a template for a new customer, and they want all these included.
I have attached the dwg for reference.
View 5 Replies
View Related
Oct 9, 2013
I have a user who has been using certain solids for years with no problems but now having one.
These are simple flat object types "solid" objects that are simple direction arrows. If I print it from model space they are filled in. If I look at it and/or print it from paper space (in a viewport) it shows up only as an outline of the arrow.
FILLMODE is set to 1, have tried 0 also, doesn't change anything.
View 9 Replies
View Related
Feb 24, 2013
How I can get rid of the construction lines that show on a solid model so all l am left with is just solid colour.
View 6 Replies
View Related
Aug 3, 2010
I'm having issues involving hidden lines that should not be hidden lines in the idw environment.
I am using Inventor 2010 suite, 64-bit. I have largish assembly modeled with several sub-assemblies and a few reference assemblies. Some of the reference models are shrinkwraps from other large assemblies (surface type shrinkwrap, link broken), and other reference models are acutal assemblies that I am unable to shrinkwrap because I need the positional reps that they provide.
When I place my parent assembly, with all the normal and reference models included, on an idw, large portions of the reference models do not show up. If I change my line style to show hidden lines, the missing parts show up. At first, I thought that it may be because the reference parts in question were not originally in the view due to the reference data margin, so I started a new sheet and set the margin large enough to show the entire machine, as well as the state of Michigan, before I set the base view, but I still don't get those parts unless I enable hidden lines.
Even at that, Inventor is not behaving consistently. Some of the parts that won't show unless hidden lines enabled are fabricated parts that I or a co-worker modeled, some of the parts were imported from SAT, STEP and IGES files, and some of them are shrinkwrap parts. On top of that, some of the parts will show up normal (without hidden lines shown) if I change the part's BOM structure from reference to normal, while others still will not show unless hidden lines are enabled, regardless of the BOM structure. Keep in mind, none of these parts are hidden behind anything in the model, even with everything visible in my design view rep, so what's causing Inventor to think these parts are hidden.
Computer Specs:
Dell Precision M6500 mobile workstation (purchased in April 2010)
Windows 7, 64 bit OS
Intel i7 processor
8 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP3
Computer Specs:
Dell Precision M6500 mobile workstation
Windows 7 SP1, 64 bit OS
Intel i7 processor
12 GB RAM
NVIDIA Quadro FX 2800M graphics
Inventor Suite 2010, Subscription Advantage Pack, SP4
View 6 Replies
View Related
Nov 8, 2012
I'm using AutoCAD Mechanical 2010 and received a .DXF file that contains 'solid' objects. Unfortunately the next tool in my workflow doesn't understand 'solids' only polylines (and a few other basic shapes like circles, lines, etc). Is there some way to convert the object in AutoCAD?
I tried the 'boundary' command but when it asks to 'Pick Points' and I click inside the solid, it always gives the error 'Valid hatch boundary not found'.
What am I missing here?
View 1 Replies
View Related
Feb 9, 2012
In 2008, never had this issue.Just dumb, circles, and lines in a view port, that have hidden or center linetyoes assigned to them. When we go to plot using legacy hidden (this new for 2012?) the plot comes out with continuous lines. These are not solids. Just ordinary line entities.Now, when I change the shadeplot to "hidden" the linetype is shown correctly, but now my entities are coloured, when I just want my drawing to be black and white (going to PDF), even though all of the colours in the pen style are set to "Black".
Has this changed? Is there a new variable introduced?
View 3 Replies
View Related
Oct 9, 2013
Here is what my artboard looks like. What I'm trying to do is just get the black shapes as one solid logo without the white showing. For example, if I were to place this in another Illustrator project, it would still have the white rectangles with full transperency. I tried a tut online, but when I place the AI file into another project, the WHOLE image is invisible.
If I were to open this AI file in Photoshop, I could use the Magic Wand to delete the white parts and leave just the black shape. I want to be able to resize the black shape and use it on banners, avatars, etc.
Background notes: I am using this for my gaming website and I would like to be able to use this for my logo. (Crossfire)
View 8 Replies
View Related
May 7, 2013
I have made my sections cuts through the floor plans, but when I view them, the walls I have cut through are not poched in to show that there is a solid wall there.
View 1 Replies
View Related
Sep 15, 2013
I`ve just installed Inventor student and I can`t use it at all since I can not see anything in the main screen! I`ve installed, reinstalled and nothing
I`ve attached two screen shots - hovering over the main screen I get the options and data showing like the correct thing is happening - just nothing visible!
View 1 Replies
View Related
