AutoCAD 2010 :: Exporting Custom Linetypes
Jul 16, 2012
Ok over the years here they currentley have lots of differnt custom linetypes scattered over lots of drawings. What I am trying to achieve is to drive some standardization here
So what i want to do is create a series of standard drawings with various custom linetypes
So using design centre i can drag and drop linetypes into a standard drawing but what i really want to do is export these custom linetypes into a .lin file
is it possible to do this ?
View 2 Replies
ADVERTISEMENT
Mar 12, 2012
I created some custom linetypes. When I copied them over to my drawing, the text in the linetypes came in extemely large. I really need to get this figured out as I am setting up a template for a new customer, and they want all these included.
I have attached the dwg for reference.
View 5 Replies
View Related
Feb 25, 2013
I created a custom shape for a custom linetype. I had no problems making it and the linetypes worked perfectly in the drawing I created it in. However, when I tried to load the linetype into another drawing it said there was a bad definition in the line with the link to the shape file. When I tried to import the shape file into the drawing to look at it, it said that the shapefile has an invalid FIle Code number (707865649). Considering that I created it not ten minutes before I do not understand what the problem is. The real problem is that I have made many linetypes and all the ones with shapes are having the same problem.
View 1 Replies
View Related
Mar 8, 2012
I am a landscape architect, and am trying to use bushy linetypes to delineate blobs of mass plantings. I created my custom line types, and tweaked them to the point where they look the way i want, but whenever i have a curve the line type faces in not outside the closed polyline. all of my shapes are closed poly lines, and i need the linetype to face out other wise it looks weird. I am attaching a picture the strait line to the right is the way that it is supposed to look, but in the circle you can see how the points are all facing in to the middle of the circle? reversing the direction dose nothing, and using a or u in the place of r in the linetype shape code doesn't work either below is the line types code and image.
*Curveypines, Curvey zigzag
A,.0001,-0.0,[a,curvya.shx,s=.01,r=0.0,x=0,y=0],-.25,[b,curvyb.shx,s=.01,r=0.0,x=0,y=0],-0.0,[a,curvya.shx,s=.015,r=0.0,x=0,y=0],-.355,[b,curvyb.shx,s=.015,r=0.0,x=0,y=0],-0.0
Screen shot 2012-03-07 at 4.30.48 PM.jpg
View 4 Replies
View Related
Jan 6, 2012
I am upgrading to 2012 from 2008. Will all of my custom settings/ linetypes/ blocks, etc. automatically transfer over?
View 1 Replies
View Related
Feb 8, 2013
My custom linetype (something like this ----W----W----W----W---- ) doesn't work as a huge polyline (6 units wide.) The line is wide enough but the letters are tiny dots.
If I try to set the lineweight by layer, the maximum is 2.11 mm, which is way too small for the 50" by 70" map I'm working on.
Is there a way to get a nice looking line that wide with letters ( ----W---- for water, -----S---- for sewer, etc.) or should I tell my boss that we have to use the standard lines?
View 3 Replies
View Related
May 28, 2011
I have Autocad 2007 and already have created a few custom linetypes by creating a new .line file that i edited with notepad.
My question is can i create a custom linetype intuitively by drawing myself the linetype on my autocad screen and then entering it somehow in Autocad without having to bother with linetype code.
View 9 Replies
View Related
Jun 29, 2012
Is there any way to have 3d polylines show a linetype? I need to have my contours that are created as a 3d polyline show up as a hidden linetype. These polylines came from an aerial mapping and have lots of vertices.
View 5 Replies
View Related
Mar 21, 2012
Today I noticed 6 or 7 linetypes that have appeared in every drawing I open and cannot be deleted.
They include "Amzigzag" " Amconstr" "ACISOTGB" and others.
If I delete everytjing in my drawing and purge the linetypes are still there. They even appear if I load old drawings that din't have these linetypes initially.
Inventor 2013
View 2 Replies
View Related
Feb 26, 2013
For some reason all of my linetypes have disappeared, and even when I go to Load, there are no options. The only linetypes available are lines and dashed lines, and I have a fence linetype but it does not show the circular pattern in the fence. How can I get these back?
View 1 Replies
View Related
Dec 27, 2013
I have a drawing that have blocks in them I cant find inserted. I cant purge them or the linetypes they have. How do I strip them out if I cant find them to explode them?
I have attached the file.
View 9 Replies
View Related
Mar 18, 2013
Is there a way to change linetypes within a certain object?
EXAMPLE:
I want to show hidden lines under another object.
So far, what I do is trim the existing lines and draw new ones with a new layer.
View 3 Replies
View Related
Apr 11, 2012
I need to create a complex linetype for a fence. The line needs to consist of the following:
------X------X------X----- The linetype needs to be dynamic to any length.
View 9 Replies
View Related
Oct 19, 2012
How do I remove unused linetypes from drawing
View 3 Replies
View Related
Oct 22, 2013
If I start autocad and draw a line then change its linetype from continuous to Fenceline2 it shows up like it's supposed to, a line with small squares in it. I can also change it's linetype to Fenceline1 and the linetype shows up just fine with the line and small circles in it.
But when I call up some existing autocad drawings that have lines with the Fenceline1 or Fenceline2 linetypes assigned to them, the small boxes or circles are missing from the linetypes. When you type linetype at the command prompt the linetypes are listed in the dialog box, but for some reason they are not showing up right in the existing drawing. When I type linetype, and hit the load button, and browse to my acad.lin file and select it, I get an error message of Bad Definition for linetype Fenceline1 and another for Fenceline2 and another for Batting etc.
So why are these Complex linetypes not working in the Existing drawing but work fine in the just call up autocad empty drawing, and how do I fix them to work in the existing drawing?
View 3 Replies
View Related
Oct 15, 2013
We recieved some drawings from a client for updating. The Pneumatic, System Link and Heat Trace lines all show up solid in the drawings when I open them up in AutoCAD 2012. We tried opening them in AutoCAD 2004 and are experiencing the same issue. In the Linetype Manager menu, under Description, the linetypes appear correct. Under Appearance, Heat Trace and Pneumatic appear solid and System Link appears dashed (just as they do in the drawing itself).
Here's the kicker. A co-worker has AutoCAD 2004 on his laptop and everything shows up and plots out just fine.
View 9 Replies
View Related
Jul 24, 2012
I can not get certain linetypes to start with the same dash length, see attached. The linetype will start with a longer dash then the stated length, depending on the length of the pline segment. Is there a way to fix this?
Here is the code for one of the linetypes highlighted:
*FENCELINEc,EX FENCE X---X---X---X---X---X---X--
A,.125,-.0625,.125,-.0625,.125,-.0625,.125,-.125,[FENCEx,FENCEx.shx,x=-.025,s=.1],-.0625
View 4 Replies
View Related
Jul 17, 2013
We have a problem in our office. In some of our drawings we keep getting a lot of unwanted linetypes and text styles. Nobody is sure where they originated.
We have tried this method in getting rid of them but it doesnt work. [URL]
See attached file.
Same applies with the text styles.
View 9 Replies
View Related
Nov 9, 2012
We are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow
View 3 Replies
View Related
Feb 9, 2012
In 2008, never had this issue.Just dumb, circles, and lines in a view port, that have hidden or center linetyoes assigned to them. When we go to plot using legacy hidden (this new for 2012?) the plot comes out with continuous lines. These are not solids. Just ordinary line entities.Now, when I change the shadeplot to "hidden" the linetype is shown correctly, but now my entities are coloured, when I just want my drawing to be black and white (going to PDF), even though all of the colours in the pen style are set to "Black".
Has this changed? Is there a new variable introduced?
View 3 Replies
View Related
Nov 21, 2012
I am trying to export a user parameter that is a text string to a custom I property. I am able to export other parameters to custom properties that are numarical values. I export check box is missing on the text user parameter.
Is there a way to acomplish this with I-logic?
View 5 Replies
View Related
Oct 31, 2012
My company have some custom menus and some some lisps that are related to it.
to install the menus in r14 first we opel tools/options/Files then we add the custom folders under the Support File Search path then we load the menu and open the Display screen menu and after all the commands can used under the screen menu.
this also work under acad 2000 but cannot find a solution under 2010
View 1 Replies
View Related
Aug 5, 2013
I am exporting a design for 3D printing, and it includes multiple objects. If I save each part as a separate STL file, and assemble them in my 3D printer software (Object), the alignment of different parts is lost.
If I save it as a single STL file all the objects are grouped, and I cannot select them individually to assign them different properties.
I am using Autocad 2012 student version, and it does not allow me to select any option at the moment of exporting the files.
View 2 Replies
View Related
Dec 19, 2013
Exporting DWG. Files to Stl in 2011 Autocad
View 2 Replies
View Related
Feb 7, 2013
Since 2013 is the first version to have pressure networks, do I need to explode the objects before saving to a previous version? Or is there another method? I will lose all my properties if I explode the objects I believe...
View 2 Replies
View Related
Jul 31, 2012
It strikes me that there should be an easy way to do this, but it eludes me at the moment. I've used "Connect to Data" to attach a .shp file export from another software, specifically a Windmill computer model. The geometry and data comes through, but the table contains no coordinates, which is what my vendor wants. The drawing overlay's georeference info very closely (within our tolerances) and the Coordinate System is set.
How to suck that coordinate info off the drawing without spending a week clicking on each of 8600 points and typing LIST?
View 5 Replies
View Related
Oct 24, 2012
I am trying to make some custom buttons to change some text to a different layer and then change the text height.
I cannot figure out the command line alias for "Text Height" to enter it into the macro.
I have tried the "scaletext" command but I cannot figure out how to add this command to the "Chprop" command on the macro line. The command seems to stop before performing both actions. What am I missing? Here is the button macro so far ^C^Cchprop;la;GasAban;c;g;;scaletext;c;s;12;;
View 5 Replies
View Related
Feb 3, 2012
I have some custom texts that I use. A week or two ago they started showing up looking different and certain symbols like ' weren't showing correctly (they were displaying ? instead).
When I went into Text Style, sure enough the style being used was pointing to a file that either didn't exist or wasn't the proper format. An example is that my HS text was pointing to the Font Name HS.TTF instead of Helvetica 53 Extended which is installed as one of my Windows Fonts. When I changed the Font Name to Helvetica 53 Extended everything looked okay again.
My problem is that even after hitting apply to this change and closing the Text Style form when I open a new drawing HS text is set back to HS.TTF and not displaying properly. How do I go about permanently changing this value back to what it should be, and how did it get changed in the first place?
View 3 Replies
View Related
Jul 16, 2011
I am trying to move to a new computer and when I try to export the settings from my old computer using the 'Export AutoCAD 2012 Settings' command I get the following:
An error occured during the xport process. Please try again.
ERROR: There was am error generating the XML file.
Environment:
Windows XP Pro SP3
MS Office 2007
AutoCAD 2012 (part of AutoCAD Revit Architecture Suite 2012)
Otherwise, I have no problems with AutoCAD. I cannot work without my own AutoCAD setup?
View 7 Replies
View Related
Nov 27, 2013
I can add the SNCL-MMG tab in all the standard Workspace.
After that I save in a new profile.
In this computer it's ok.
My custom CUI is an Enterprise CUI.
But when I go to another computer and install my custom menu using my profile saved.
I didn't see the tab I need in all standard Workspace.
Autocad add my custom workspace and everything is fine on my custom workspace.
View 9 Replies
View Related
May 9, 2012
I am changing from AutoCAD 2011 to 2012. I created a custom tab in AutoCAD 2011 with custom panels that had all the buttons I use most often. Despite saving the workspace and the profile as I was told, it hasn't shown up in 2012.
How can I get my custom tab to show up in the 2012 ribbon, without recreating it from scratch?
View 3 Replies
View Related