AutoCad 2D :: Huge Lineweight - But Polylines Not Working With Custom Linetypes
Feb 8, 2013
My custom linetype (something like this ----W----W----W----W---- ) doesn't work as a huge polyline (6 units wide.) The line is wide enough but the letters are tiny dots.
If I try to set the lineweight by layer, the maximum is 2.11 mm, which is way too small for the 50" by 70" map I'm working on.
Is there a way to get a nice looking line that wide with letters ( ----W---- for water, -----S---- for sewer, etc.) or should I tell my boss that we have to use the standard lines?
View 3 Replies
ADVERTISEMENT
Nov 7, 2012
usingacasd 2010 inmy company we get drawing from others , most of the time we need to use the CTBto gray out others plane and emphasize our drawing on top of it., everything isgrayed out as expected but hatches and poliline which have big "global weight"property will still appear emphasize. i tried to screen out 50 percent of thepen , it effects the hatch but also the other vectors so they can be hardlyseen. howcan i have hatches and global weight poliline grayed out like all othervectors?
View 9 Replies
View Related
Jun 29, 2012
Is there any way to have 3d polylines show a linetype? I need to have my contours that are created as a 3d polyline show up as a hidden linetype. These polylines came from an aerial mapping and have lots of vertices.
View 5 Replies
View Related
Jul 16, 2012
Ok over the years here they currentley have lots of differnt custom linetypes scattered over lots of drawings. What I am trying to achieve is to drive some standardization here
So what i want to do is create a series of standard drawings with various custom linetypes
So using design centre i can drag and drop linetypes into a standard drawing but what i really want to do is export these custom linetypes into a .lin file
is it possible to do this ?
View 2 Replies
View Related
Jan 24, 2012
All my lines are the same lineweight when I plot, they do show differently on my computer screen, how can I fix this?
View 6 Replies
View Related
Feb 25, 2013
I created a custom shape for a custom linetype. I had no problems making it and the linetypes worked perfectly in the drawing I created it in. However, when I tried to load the linetype into another drawing it said there was a bad definition in the line with the link to the shape file. When I tried to import the shape file into the drawing to look at it, it said that the shapefile has an invalid FIle Code number (707865649). Considering that I created it not ten minutes before I do not understand what the problem is. The real problem is that I have made many linetypes and all the ones with shapes are having the same problem.
View 1 Replies
View Related
Mar 8, 2012
I am a landscape architect, and am trying to use bushy linetypes to delineate blobs of mass plantings. I created my custom line types, and tweaked them to the point where they look the way i want, but whenever i have a curve the line type faces in not outside the closed polyline. all of my shapes are closed poly lines, and i need the linetype to face out other wise it looks weird. I am attaching a picture the strait line to the right is the way that it is supposed to look, but in the circle you can see how the points are all facing in to the middle of the circle? reversing the direction dose nothing, and using a or u in the place of r in the linetype shape code doesn't work either below is the line types code and image.
*Curveypines, Curvey zigzag
A,.0001,-0.0,[a,curvya.shx,s=.01,r=0.0,x=0,y=0],-.25,[b,curvyb.shx,s=.01,r=0.0,x=0,y=0],-0.0,[a,curvya.shx,s=.015,r=0.0,x=0,y=0],-.355,[b,curvyb.shx,s=.015,r=0.0,x=0,y=0],-0.0
Screen shot 2012-03-07 at 4.30.48 PM.jpg
View 4 Replies
View Related
Jan 6, 2012
I am upgrading to 2012 from 2008. Will all of my custom settings/ linetypes/ blocks, etc. automatically transfer over?
View 1 Replies
View Related
May 28, 2011
I have Autocad 2007 and already have created a few custom linetypes by creating a new .line file that i edited with notepad.
My question is can i create a custom linetype intuitively by drawing myself the linetype on my autocad screen and then entering it somehow in Autocad without having to bother with linetype code.
View 9 Replies
View Related
Mar 12, 2012
I created some custom linetypes. When I copied them over to my drawing, the text in the linetypes came in extemely large. I really need to get this figured out as I am setting up a template for a new customer, and they want all these included.
I have attached the dwg for reference.
View 5 Replies
View Related
Feb 13, 2012
How to add and delete a “lineweight” from the lineweight list?
I’m wondering if there is a way to add and delete lineweight from the lineweight list?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 9 Replies
View Related
Feb 7, 2008
I could really use some help. I have to work on a vergy large photo (a 2x2.5 metters print, in 300 dpi). Someone told me that I should work on a small version of the file, and then copy and paste the history from the small to the big file
The thing is: how do send the modifications from one file to another?
View 1 Replies
View Related
Apr 2, 2007
creating very large digital artwork. I mean images that are around 3ft by 2ft at least, maybe upwards of 48" by 30".
Many layers, lots of depth going on, in the vein of lets say - Abstract digital art. I will also be creating these images not only at large image size but very high quality for Giclee and other printing purpose.
My question is, what sort of PC requirements should I consider for the most efficiency. As much RAM as possible? I am already looking into a 30" monitor just to give me as much real estate as possible. When working at images around 10,000 x 7,000 pixels I am already working at 12% image on a large monitor.
If money wasn't much of an option what would you go for/what considerations would you bring up?
2+Gigs of RAM over Dual/Quad Core processors.
One large 30" monitor or perhaps Dual 24"?
Massive HD space for the 300mb that each image will be when saving/storing.
View 2 Replies
View Related
Jul 1, 2013
I have points in a 2012 C3D drawing and I am looking to draw 3d polylines from point to point. Ultimately I am wanting to generate breaklines for a surface from a topo. I was able to do this a few months ago and now no matter what I try nothing seems to work. When use the 3P command the Z Vertex is 0. All of the points in the drawing have elevations. I tried drawing a feature line however, the beginning elevation is saying 0. Its as if these lines do not recognize my points as having elevations.
View 6 Replies
View Related
Dec 30, 2012
Just found the issue with my AC2013.
A bit of difference is that the polylines do not have to be even closed. Any polyline gives me exactly the described behaviour, which is definitely not intended. Appears still not resolved.
View 4 Replies
View Related
Jan 2, 2014
As the above mentioned, I have a drawing drawn using polylines with width from someone. The width of the line are suppose to represent area,
To put things into prospective, here is an example:
The polyline is 10 unit long and with a width of 2 unit wide. If i explode that polyline, it will become a single polyline without width. The line are suppose to represent 10 unit long and 2 unit wide; representing an area.
My question is is there a way to change the line above directly from polyline with width to a close polyline (4 x polylines) of 10 unit long and 2 unit wide.
View 2 Replies
View Related
Oct 9, 2013
How to draw 3D polylines, or convert single lines to polylines?
this.JPG
View 7 Replies
View Related
Jan 20, 2006
Is there a way of converting 3d polylines to polylines with an elevation?
I have a dwg of contour information, the contours are 3d polylines, because they are contours the z value is constant all along the line, so there no question what the elevation of the polyline would need to be.
I need to do this as I then need to import the dwg into a GIS programme called MapInfo whch doesn't read 3d polylines.
I have access to AutoCAD 2004 or 2005LT.
View 9 Replies
View Related
Jun 2, 2012
I am using AutoCAD 2011.
I want to add a few new scales in layout. The new scales are: 4"=1'-0" up to 5-3/4"=1'-0" in 1/4" increments. Unfortunately when I add the scales in scale list edit while I'm in Layout, my drawing doesn't scale to any of the new scales.
View 4 Replies
View Related
Sep 7, 2011
We have this very cool tool that automatically creates a custom sheet property (IndexNo) and indexes all sheets in the active sheet set. Unfortunately, it doesn't run in 2012 and the guy that wrote the application no longer works for us.
View 7 Replies
View Related
Aug 8, 2012
We are have been using Inventor to draw wooden furniture for a couple years, and have a custom appearance library with several different finishes (using photos of actual finished pieces of wood). Every now and then a part (ipt) takes a notion to not change to the color we set it to, seemingly without ryhme or reason. This mostly occurs with mirrored parts, but occasionally a standard (not mirrored part) will do this as well.
We have done all the obvious things, and some not so obvious. The path to the photos and the library is added to the project, and I opened the Appearance Browser and checked to make sure appearance knows where to find its bmp file, and it still doesn't do it to change color. And yes, I tried restarting my computer, because a couple days ago I was working with the Appearance Browser, and sometimes restarting Inventor made a difference in whether certain things worked or didn't work. This is also not limited to one computer, it acts like this on all of our computers.
We are using some png files and some bmp picture files. Would the file format maybe have something to do with it ?
View 1 Replies
View Related
Apr 26, 2013
I am trying to embolden lineweights to stand out on the drawing, without them getting in the way when viewing in the drawing. I have set the lineweight in the layer dialogue box to the max size (2.xx mm), checked the "plot lineweights" in the printer dialogue and switched between none and grayscale (this is so the assigned colors will fade out in the background). Nothing I have tried thus far has changed the print output on any of my printers (virtual PDF, HP2100, HP2600n, HP2840 they are all very old). I have read through the lweight command and help sections, but I don't need it assigning the lw just getting it to properly print.
One possible problem: is the line weight relative to scale or is it absolute? I am printing at 1/8" scale, and that can't change.
View 2 Replies
View Related
Jan 9, 2014
I already change the lineweight on the properties but nothing happens to the line. What's the matter?
View 2 Replies
View Related
Dec 6, 2012
Quick question about plotting to a PDF. I'm using autocad 2013 and I'm plotting to a PDF printer called bullzip, a free PDF printer. My question is, will my line-weights be the same if I have kinko's print a PDF file with my drawings in them
View 2 Replies
View Related
Dec 13, 2012
Just today, while making graphics and such, my custom fonts just stopped working all together. Every single one that I have installed just shows up as nothing and is un-selectable when using it. The one in particular that i was using is Bebas Neue. Although all installed fonts are not working either.This happened out of the blue and I don't remember hitting anything or changing anything. Just typing with the font and it refused to show.
Steps Taken:
1. Reset All Preferences
2. Shift Key Trick on Load Up
3. Restarting the Computer
4. Reinstalling PSP X2
5. Using the font in other programs - Which they WORK (Word, GIMP, Adobe Illustrator, etc.)
6. Uninstalling/Reinstalling the Font itself.
View 2 Replies
View Related
Oct 29, 2012
My AutoCAD LT lineweight settings keep resetting from drawing to drawing, is it suppose to do it or what?
I just want my lineweight settings always (for any drawing) to be as I set them!
View 9 Replies
View Related
Apr 3, 2013
I am currently converting my drawing to PDF. However, certain lines on the drawing are showing up bold and thick when converting. I understand that they are appearing and disappearing due to me turning on or off the hide/show lineweights feature. But I would like the lines to be default size. I don't need them thick.
View 7 Replies
View Related
Jun 16, 2013
I am running two networked computers and a networked Designjet 510 plotter. One computer runs LT2013 and the other LT2014.
I am having an issue with the LT2013 machine in that it plots much darker than it should (uses a heavier lineweight). I have checked the plotter set up and plot style and both appear the same.
View 1 Replies
View Related
Aug 8, 2013
Im trying to print a logo for my detachment using Autocad to PDF but for one the line dont show up in the PDF file and second the original color of the drawing is faded. Black goes to a smoke grey color, lines dont show up, and the red is blurry. I need this to be fixed but I just dont have the skill to do it. And stupid autocad doesnt have a contact number for step by step instructions with an actual human! Im trying to use the logo for a T-shirt but it seems like I cannot for the life of me print a suitable digital image for it. I am using AutoCad ARCH 12...
View 4 Replies
View Related
Aug 2, 2013
I have a few objects on a layer (Circles and Lines).
I am trying to make them "Thicker". I have tried adjusting the layers "Lineweight" as well as individually selecting them and adjusting the lineweight but neither is working for me.
View 2 Replies
View Related
Jun 12, 2012
Using AutoCAD 2011 we always use 0.00 as our default line weight but the default will change to 0.010 with no real pattern. It can be any drawing at any time. We have reset this dozens of times without being able to stop it from reoccurring.
We are also not able to get line weight to display (yes we check the Lineweight Settings, Display lineweight box) again on random drawings at random times.
View 1 Replies
View Related
