I installed Revit Architecture but it didnt work so i decided to uninstall it. When i tried intalling it again it said that Revit Arcitecture is already installed. I did the clean uninstall that is posted on the website but it still didnt work. What do I do?
View 3 RepliesIm currently using Autocad Architecture, is it true that Autocad Architecture creates a bigger file size compared to Revit Architecture? Lets say that same structure and components are created.
View 3 Replies View RelatedI do not get why new Archicad Architecture has 3d modeling when Revit architecture already provided for it. What is the different between those two? I really want to know the difference. It bothers me somewhat about them.
View 4 Replies View RelatedI've successfully installed AutoCAD Architecture, and others, and was wondering if the files created directly in my C: drive under the folder 'Autodesk' can be deleted, (running short of disk space)?
They look to be, by their names, install files and I note what looks to be the actual applications, etc., are present in the Program folder, under another Autodesk folder, and Program (x86) for Design Review.
I am getting a message:
"the system cannot open the device or file specified".
C: emp\_AIA9B6.tmpx86en-uscomponentsadr2012setupdesignreview2012.msi
i then search *.msi file and got another message:
microsoft visual C++ 2010 redistributed is required to continue w/ installation.....
I have admin privs, running net 4, sufficient memory
how do I post revit files and jpgs?why won't the roof install with the overhang? I set it to 12", click on the walls and no matter what I try, I get a general message that I can not produce roof. When I click on lines, I get a roof without an overhang.How do you fill in the gable ends?
View 2 Replies View Relatedhow to download and install extensions for REVIT 2013? I'm not sure it will work for a student version, but I figured why not try to install it if possible.
View 3 Replies View RelatedAn error happened when Install Revit 2014. how to fix it?
View 2 Replies View RelatedI had to uninstall the material library from my C drive. I have a dedicated SSD OS drive with very little extra space to spare.
Now that I need the material library again, when I try to install it, the installer still insists on using 1.2 GB on C.I've browsed for the new drive letter, and the little pop up window still shows it using no space on any other drive, and 1.2 on C.
what is the difference between revit Architecture and Revit MEP.
View 3 Replies View RelatedI used Revit Architecture to build up a project. It is now ready for all further task you can do with Revit MEP, like electricity and plumping.
I tried serveal ways to import the rvt file in Revit MEP. If I just open my Revit Arcitecutre file I have all my views and cuts but I can't install any tube or wire because the view is missing where I should see it.
The other way I tried is to open a new MEP project by using the standart template and link it with my Revit Arcitecture file. That works, but I only get a shape of my project and it is really hard to navigate without all the views I was used to in the Revit Arcitecutre.
How can I use MEP on my current project by keeping the views and structure of my Revit Arcitecture file.
Is it my inexperience with the product or is Revit Architecture far less competent for designing residential architecture than it is for commercial? I'm trying to design a large home and face workaround after workaround - many of which defeat the BIM materials inventory database I'd like to develop for quoteing the job. I understand that a Wood Framing Extension is available, but I'm still a student learning the software and the application is a subscription item and a high cost.
View 4 Replies View RelatedI have a revit structure and revit architecture model and I want to combine them. I keep seeing tutorials on how to bring arch into structural, but i only have arch, so can I put structul into arch?
From what I understand, this is the steps, but I cant get it to work
Open arch file
select link revit
select structural file
but then i never see it open.
How to save a file as a PDF in Revit Architecture 2014? I have tried going to print and then just save as a PDF, but there is not a PDF option.
View 3 Replies View RelatedI need to import a PDF file into Revit Architecture 2012 and/or AutoCAD Architecture 2012.
View 1 Replies View RelatedI just recently noticed that when I print documents from Revit Architecture, they are printing smaller than the scale size they are set to. I verified with a couple of different scale settings against a good old fashioned scale ruler. It seems to be consistently incorrect.
View 3 Replies View RelatedI am having issues with not being able to put in a column on an angle when using Revit Architecture. I read a troubleshoot guide and you can do it using Revit Structure, however Architecture is a different story.Why is this, and more importantly how can I put a column in on an angle.
View 1 Replies View RelatedHow to import 3D projects from AutoCAD Architecture into Revit ? A 2D layout has come through from a 3D DWG, though 3D structures have not.
View 2 Replies View Relatedwhere to find the build number of my Revit Architecture 2012-that is within the software I've installed. I know what the latest build number is. so want to check I have it.
View 2 Replies View RelatedI seems that SolidWorks Live Building is better than Revit, so I'm going to wait until Autodesk buys it and tell us to forget Revit, as they did with AutoArchitect S8 and more recently with ADT:
[URL]...
[URL]....
I am using Autodesk Revit Architecture 2013. I am using mirror project from the manage pulldown under position. I have used this tool many times in the past with success. This particular home is an average size two story. The file is about 40Mb. I tried flipping the home and Revit gets to about 29% and stopps. I let it run for an hour over lunch, even over night and no luck. I tried the same house on another computer running Autodesk Revit Arch. 2013 and it did the same thing.
I tried purging the file, I made sure nothing was locked, I even got rid of my grouped items. I tried copying the plan into another "fresh" file with nothing extra (like title blocks or other families).
I do have some floor framing shown in this plan. I used structural 2x10s to produce the framing (I did try getting rid of the framing and it didnt work). I tried turning off the roof lines (it has about three reverse gables) and nothing.
I need a file called Curtain Wall Dbl Glass.rfa. It's missing in the Doors folder in my UK Fmaily Library in my software. I've found one on the web. I've copy/pasted it onto my Desktop. How do I now load it into my Revit project ?
View 1 Replies View RelatedI'm trying to duplicate an exercise published in Revit Architecture 2012 Essentials (pp104-105, Figures 4.25 - 4.27). I'm obviously doing something incorrectly, but I can't get the two separately drawm roofs to join.
Would love to attach the file, but the simple drawing is 2.2MB when Zipped.
I'm having a technical question with a customers Revit Architecture 2012. The project he's working on is about 90 Megabytes in size, and the references are about 60MB. He is storing these on a network share. Unfortunately they are still on a 100MBit network. As Workstation he is using a DELL Precision M6500 (notebook) with the following specs:
when he is trying to zoom in on and out of this project, he is experiencing high waiting time between the zoom-steps, sometimes unbearably long. As the notebook is brandnew and tested I didn't blame it on faulty hardware. So I suggested to run the same Project on a different machine.
I don't know much about the software architecture of Revit Architecture, so i don't know which hardware component is mostly stressed when zooming in and out (guessing the gfx, because the project needs to be recalculated?). I guess there lies the bottleneck.The customer requested an answer, which hardware needs to be exchanged / upgraded in order to accelerate the zoom-steps, decrease the latency.
Is there any way besides creatng "family" components, other than starting with a "canned" system family component, to import details into a Revit Project?
Right now, I'd like to draw something in another app, and plunk it onto a wall in my project file.
I am familiarizing myself with Sketchbook Designer, and would like to draw something there, and drop it as a 2-D into my project. I have this sinking feeling that I might be SOL.
Is there any way to create a component in Sketchbook (or any other ADesk app), and export it as a file that can be brought into Revit as a family component? If not, how am I supposed to create custom components that are far removed from what's available in system families? The item I want to create has no similarity to anything available in Revit Families (but maybe it doesn't have to even remotely resemble anything in available system families to be created?).
How to create dormer window in revit architecture 2013
View 1 Replies View RelatedI am having very frequent recoverable errors - havent seen any pattern but happens in veiws and mostly editing operations. I am filling in the error reports and there must be quite a collection now of mine.
View 4 Replies View RelatedIs it possible to project an elevation drawn in CAD onto a curved wall in Revit?
The pattern of the cladding is very complicated and varies in both directions (curves) so it was easier to draw in in CAD, but I would like to project it on my curved wall in Revit, co that I could calculate the cladding areas accurately.
My detail component manager in AutoCAD Architecture 2011 was working fine until I installed Revit 2013 on it (as part of Building Design Suite 2013). I have tried uninstalling and reinstalling MS .Net framework, but it has not worked.
View 2 Replies View RelatedI have this file that won't open in AutoCAD Architecture 2012, well let me rephrase that, it won't finish opening. It has 4 or 5 xref's attached. I was able to open this same file using 2010. Through process of elimination I was able to determine that a file that was exported from Revit MEP 2012 was the problem. When that file was detached the drawing would open just fine. To make things more interesting, I am able to open the Revit Export file just fine using 2012. What diabolical combination of event has happened to cause this SNAFU.
View 2 Replies View RelatedOne of our employees logs in remotely to a local PC running Revit via terminal services so that all work is done on the local network. The employee is acting through screenshots. All worked well using 2009 Revit or Architecture on XP machines. However, we added new faster Windows 7 machines with 2012 products. The PCs are all 64 bit with 16g RAM and a 22mb internet connection.
View 3 Replies View Related