I have a revit structure and revit architecture model and I want to combine them. I keep seeing tutorials on how to bring arch into structural, but i only have arch, so can I put structul into arch?
From what I understand, this is the steps, but I cant get it to work
Open arch file
select link revit
select structural file
but then i never see it open.
ACA 2011, 64bit.Trying to create fields that link to my aec project name, and number, and description. I'll use the AEC fields in my titleblock to make my titleblock management quite a bit easier.
If I open my template file and try to create a field that links to the AEC project "Project Name". It will come up as ####. I do not want to have a bunch of number signs in my titleblock. project number, and other fields show up as the same #######.
But if I create a new construct from the project navigator, open the new construct, and create a field that links to the AEC project "Project Name". It will come up as Project52. Autocad is now picking up the proper name, and number and everything works fine.
Shouldnt files that are opened in the old fashioned way be able to link to AEC fields? Or should I create & open all files from the project navigator from now on?
Working with an excel spreadsheet and following ACA. Looking for datalink dialog box.
Ribbon: Insert tab>Linking & Extraction panel>data link.
Problem is that the Linking & Extraction panel is not available.
ACA2011
Win7 64
Are there any known methods (work-arounds or otherwise) for linking cad files in families?
View 1 Replies View RelatedWe are having a problem at our office. We are using REVIT 2014 and In our central model we link in our consultants models and hide what we dont want to see per sheet by using veiw templates. It is all fine and dandy until we have to load a newer model from them in. We delete the old model name the new one the same name once we do this everything we wanted hidden comes back on on our sheets and we have to rinse and repeat.
View 3 Replies View RelatedIs there a possibility to furnish a hyperlink linking on a defined Excel-data sheet within an Excel file? Are there other possibilities to tie together to a drawing object external additional information, e.g., a product name, product data or product pictures?
View 1 Replies View RelatedIf I bring link in a dwg file origin to origin. The line work comes in correct and straight but in the wrong position.
If I link in a dwg file by shared coordinates it comes in in the right position but the dwg lines aren't straight if you move the mouse they jump around.
We are currently designing a Highways project which includes a cut and cover Tunnel (dual 3 lane through goes underneath a signalized at grade junction). Navisworks will be used for clash detection of all disciplines. To clarify the cut and cover structure will be similar to a large box culvert. Although new to the software; the Highways team will be undertaking the Civil Highways design in Civil 3D.
My question is - what is the best Autodesk solution for the structure and associated retaining walls? Note at this stage we are unsure what all of the design components will be (e.g. pump room for drainage etc). Previously the Structures team would have produced a 2D design (however 3D modeling is a requirement).
I have seen on the internet Civil 3D and Revit Structures being used interactively (although it appeared to be incorporating bridges only). Is Civil 3D able to affectively model this structure and retaining walls within the subassembly composer? Or is the question more to do with how the Structures team will complete their design (i.e. reinforcement detailing / scheduling etc).
I have a problem with my revit 2013, I have to change one of my walls structure, but as soon as i hit ok the message "Pads can't overlap (but can share edges)" pops up, I cant understand where the problem comes from because I am not changing pads boundary!
View 2 Replies View RelatedI am trying to create a glass roof structure over a staircase (see attached image - underground roof). I thought that I would do this by creating an in place mass, then adding either a roof or probably more likely a curtain wall system to the faces. However I am struggling to create the mass. I have made a wireframe of the roof (wireframe) using lines where the roof folds are, in autocad. I have then linked this in to Revit.
When I come to creating the Mass, I can only place lines using the "Pick line tool", which then only places lines on a specific reference plane (level 1,2 etc), so I only get a 2d footprint of the area I want to create this mass.
If I try to create a mass face using the 3d snapping tickbox, Revit fails to register that there are any lines for me to snap too. I have tried to "Tab", but this doesn't work either.
Attached is an image of one of the many Complex pipe structures that I am working on for steel fabrication (family), what I am trying to achieve.
I am creating these pipes using sweeps with reference lines at their centres, then I trace over them in 3D using pick path command when creating the extrusion. Is this a good way of doing it?
In trying to draw this particular element I have hit a problem. Drawing the curves that join the straights has become difficult as the straights don't align easily, and so I was wondering if there is a way of creating a reference plane by picking 3 points in 3d? This would be really, really useful!
The curve at the top left of the 'plan' joining the straights is difficult to draw as the straight on the left comes back at an angle and not perpendicular to say the rear vertical pipe work, which is drawn using another plane. I have managed to draw this so far by aligning it by eye, a dodgy way which is not really acceptable.
Found a way I think. A major part of the problem is that you cannot draw a reference plane in 3d! So after I have oriented to a plane perpendicular to the direction I want to draw, I then can draw an extrusion and then rotate the view in 3d and pick the face of the extrusion that aligns with the plane I want to draw on. A bit finicky really. Is there a better way?
I have used the align to plane in 3d
Using Revit 2012
We have a structure model linked into our architectural model, where some structure will be located within the wall. The cut pattern of structure is not always showing on top of (opaque) the wall cut pattern. Sometimes the cut pattern appears transparent with the wall cut pattern running through the structural member.
I tried playing with this in a fresh project with just a C channel in a wall. Sometimes it shows opaque and sometimes transparent depending on the position of the channel in the wall. I would try making the member flat at different elevations and sloped at different elevations and they all had different graphic display behavior. Then I tried duplicating the wall and channel to have two sets to play with simultaneously. Modifying the elevation or slope in one would actually change the graphics of the other, when the other didn't move.
I've tried checking/unchecking the following parameters within the project and family without any effect: structural material, structural, show pre-cut in plan, and always vertical. Not only am I assuming that the structural cut pattern should be opaque over the wall's cut pattern, but I can't even identify what is causing it to change with different elevation/slope settings.
I will attach 2 screenshots. The one titled opaque is the desired effect.
While making an In-Place Component, Revit fades everything else and makes it hard to see anything except for what you are working on. Is there a way to change this so that everything else isn't as faded.
View 2 Replies View RelatedIs it possible to extend the roof covering layer over the top of the structure leaving the timbering recessed back, To show it where it extends over the bread board or guttering with out affecting the main structure of the roof. Also where a barge board is not required on a gable
View 1 Replies View RelatedI'm now working on my diploma work and I need to model a gridshell construction in Conceptual mass.I created the form and made adaptive component -a glass panel.I uploaded it in the family and now I need to load that family into the project space and I don't know what to do..I will have to remove the mass eventually before rendering but then the gridshell structure will disappear.I don't know how to make it real,I cannot use massing and site with this, I'm obviously missing some steps and i don't know which ones..
View 1 Replies View RelatedIm currently using Autocad Architecture, is it true that Autocad Architecture creates a bigger file size compared to Revit Architecture? Lets say that same structure and components are created.
View 3 Replies View RelatedI do not get why new Archicad Architecture has 3d modeling when Revit architecture already provided for it. What is the different between those two? I really want to know the difference. It bothers me somewhat about them.
View 4 Replies View RelatedI have ACAD Arch 2012 and I am trying to associate my door tags with my door schedule and visa versa. I get as far as creating the Door Schedule with all the doors on it and quantified just the way you would want to see it; however, the "Mark" remains "A" for every door. I discovered that I can change the Mark on the extended properties of each door, but I believe there should be a better (and more linked) way to accomplish this. Since the program already recognizes how many doors there are of a specific style it should be able to put sequential "marks" to each door, for example "A", "B", "C", etc.
what's the difference between Door Tags - Project Based and regular Door Tags?
We use C3D 2012 (metric only) - We are attempting to customize our list of structures for Sanitary Sewers. The structure list shows sizes we do not use and we would like to modify them. However, when we try to select the "Inner Diameter" it displays a list of sizes that we can not seem to modify or add to.
I have looked at some of the XML files to try and modify or add new sizes (example: AeccStructConcentricCylinder_Metric.xml) , but they do not seem to be recognized even after I restart the program.
Here is what the file looks like:
<ColumnConstList desc="Inner Structure Diameter" dataType="float" unit="mm" name="SID" id="CCL1" visible="1" context="StructInnerDiameter" index="0">
<Item id="i0">1200.0000</Item>
<Item id="i1">1350.0000</Item>
<Item id="i2">1500.0000</Item>
<Item id="i3">1800.0000</Item>
<Item id="i4">2050.0000</Item>
<Item id="i5">2300.0000</Item>
<Item id="i6">2550.0000</Item>
I tried modifying the last line replacing 2550 with 3600.
I also tried adding a line <Item id="i7">3600.0000</Item>
I saved the XML file and restarted the program with nothing changing that I can see.
Looking for correct file(s) to edit so I can modify the LISTS that come up in the piping modules.
One good thing about null structures is the way they display in 3D. They cover that gap in the pipe segments. Can I steal that shape?
I am currently using a simple cylinder for water pipe "joints" and turning it off like most people do I think.
I have drawn a pipe network with multiple concentric sturctures. I need to make them all eccentric now. Is there an easy quick way to do this, or do I have to redraw all of them. When I go to the properties, I cannot find an option that allows me to change this.
View 2 Replies View RelatedAny way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View Relatedwhat is the difference between revit Architecture and Revit MEP.
View 3 Replies View RelatedI used Revit Architecture to build up a project. It is now ready for all further task you can do with Revit MEP, like electricity and plumping.
I tried serveal ways to import the rvt file in Revit MEP. If I just open my Revit Arcitecutre file I have all my views and cuts but I can't install any tube or wire because the view is missing where I should see it.
The other way I tried is to open a new MEP project by using the standart template and link it with my Revit Arcitecture file. That works, but I only get a shape of my project and it is really hard to navigate without all the views I was used to in the Revit Arcitecutre.
How can I use MEP on my current project by keeping the views and structure of my Revit Arcitecture file.
I installed Revit Architecture but it didnt work so i decided to uninstall it. When i tried intalling it again it said that Revit Arcitecture is already installed. I did the clean uninstall that is posted on the website but it still didnt work. What do I do?
View 3 Replies View RelatedIs it my inexperience with the product or is Revit Architecture far less competent for designing residential architecture than it is for commercial? I'm trying to design a large home and face workaround after workaround - many of which defeat the BIM materials inventory database I'd like to develop for quoteing the job. I understand that a Wood Framing Extension is available, but I'm still a student learning the software and the application is a subscription item and a high cost.
View 4 Replies View RelatedHow to save a file as a PDF in Revit Architecture 2014? I have tried going to print and then just save as a PDF, but there is not a PDF option.
View 3 Replies View RelatedI need to import a PDF file into Revit Architecture 2012 and/or AutoCAD Architecture 2012.
View 1 Replies View RelatedI just recently noticed that when I print documents from Revit Architecture, they are printing smaller than the scale size they are set to. I verified with a couple of different scale settings against a good old fashioned scale ruler. It seems to be consistently incorrect.
View 3 Replies View RelatedI am having issues with not being able to put in a column on an angle when using Revit Architecture. I read a troubleshoot guide and you can do it using Revit Structure, however Architecture is a different story.Why is this, and more importantly how can I put a column in on an angle.
View 1 Replies View RelatedHow to import 3D projects from AutoCAD Architecture into Revit ? A 2D layout has come through from a 3D DWG, though 3D structures have not.
View 2 Replies View Related