Revit :: Model Gridshell Structure In Conceptual Mass?
Dec 21, 2012
I'm now working on my diploma work and I need to model a gridshell construction in Conceptual mass.I created the form and made adaptive component -a glass panel.I uploaded it in the family and now I need to load that family into the project space and I don't know what to do..I will have to remove the mass eventually before rendering but then the gridshell structure will disappear.I don't know how to make it real,I cannot use massing and site with this, I'm obviously missing some steps and i don't know which ones..
View 1 Replies
ADVERTISEMENT
Jan 23, 2012
I have problem when i try to use function analyze mass model in revit building they show message like attached file.
View 1 Replies
View Related
Mar 4, 2013
In "Categories" of the filters window, it can be selected things which composes its mass, such as Mass Exterior Wall, Mass Glazing, Mass Roof. And these things can be clicked only after its mass become energy model.
I set up a filter rule of Mass Roof and applied it to V/G Filters of a view, but it did not displayed in Analyze Mass Model, the same as Mass Exterior Wall, Mass Glazing.
View 1 Replies
View Related
Nov 22, 2011
While I run analyze, there's always an error
View 1 Replies
View Related
Aug 9, 2013
When I create the surface in conceptual mass and bring that in revit project and apply wall by face I see interior face of wall going exterior.
Can this be set in conceptual massing while creating surface so that when I apply wall by face interior face remains interior.
View 7 Replies
View Related
Oct 21, 2013
I have a .iam and .idw that i copied/designed from vault. The .idw has a sketched symbol that has a text box with the mass property. When update mass is applied the mass property in the text box does not. I ran into this once before and got it to work by re-inserting the symbol into the .idw but I can't get it to work. The orginal that was copied from works fine.
IV2013
Vault Collaboration 2013
View 3 Replies
View Related
Apr 18, 2012
sectioning.jpg
I want to model a parametric structure by acad architecture, but I don't have any clue, can you tell me the way to do this ?
View 9 Replies
View Related
Jul 10, 2013
what structure to use to model yard inlet?
View 5 Replies
View Related
Oct 17, 2013
I am trying to model a system of existing storm pipes, where the last catch basin actually has two outfalls: one an 18" pipe and the other a 24" pipe. They have different invert elevations.
I have the pipes set up correctly in Autocad, so that the profile shows up right, and the plan view in Storm Sewers shows up right, too. However, the model does not separate the flows.
Is there a way to manually enter the approximate amount of flow that will discharge through each pipe?
View 1 Replies
View Related
Jun 7, 2012
Is there any method to create sweep or shaped object in mass (should be in dimension) using Revit 2012.
The creation of sweep/revolve/blend is not available in Mass of Revit 2012.
Because the method of mass is difference comparing to Revit 2008 with Revit 2012.
View 2 Replies
View Related
Nov 6, 2013
We just noticed that the imported cad geometry in a Mass family will not cut in a floor plan view which contains a plan region. Regardless of the location or height of the plan region.
View 4 Replies
View Related
May 25, 2013
When I import a AutoCad 2D file (include several layers) into Revit, how can I extrude layer by layer (for having mass )? I mean I need to have a chance for selecting my layers separately in Revit (like in AutoCad) and then create Mass by layers.
View 2 Replies
View Related
Feb 14, 2013
I have a relatively simple mass modeled in Rhino that I imported to a Revit Mass Family (via .sat file). I then placed walls, roofs, structure on the face of this mass. However I would like to be able adjust this mass, either in Rhino or Revit and the walls and structure adjust accordingly. Now however, if I reload the mass into my Revit family, and then reload the family to my model, and then attempt to Update to Face, the error "Faces defining this Element cannot be reacquired." and my only option is to delete the offending wall/roof etc.
Is this just a limitation in Revit/Rhino, or am I totally doing it wrong?
View 9 Replies
View Related
Apr 5, 2012
I'm following a "Simple Mass Creation" exercise in a Revit book, which says to create a cube, a sphere, and a pyramid. It doesn't say how, though, it just goes on to the next step of dividing the masses into floors. After much research and trial and error, I figured out the cube and sphere, but how the heck do you create a pyramid? At first I was thinking of a blend, from a square to a point, but that's not an option. Then I tried to use void shapes to remove parts of a cube...and I'm getting an error message because my voids are overlapping and there's no solid to cut. There MUST be a faster and less complicated way to create such a basic form.
View 5 Replies
View Related
Feb 21, 2014
I have a colleague who has counciled me that sometimes it makes sense to create mass-elements for complicated gabled roof elements. Since I am pretty darn new to Revit, I am bringing in some old 2D dwg information (plans and elevations) and I'm trying to use this information to generate an in-place mass that is my roof. I'm essentially extruding gabled roof information from this geometry. So far so good. But when I try to rotate this information I find the program unwilling to do this. I have a suspicion this has something to do with the fact this in-place mass is either being hosted by the intitial horiontal working plane, or it is "pinned" to something I don't want it to be pinned to.
View 9 Replies
View Related
Jan 6, 2014
I've drawn a cross section,When I select them,I choose to create forms,The following warning appears.
View 2 Replies
View Related
Aug 22, 2011
Is there any way to change the appearance of a mass imported into Revit? I simply want to change the dark grey that shows in the rendered view and/or the white that shows up in the shaded view so I can control how background buildings (imported through google earth/sketch up) look in my drawings.
I do not want to rebuild the masses with walls, ceilings, etc, because they are just background site elements. I have tried to do this through object styles. I have tried to do this through "Override by Element" and "Override by Category". I am importing the files as in-place masses and there is no way to edit materials because "Materials" doesn't even show up as one of the element properties.
View 9 Replies
View Related
Jan 6, 2014
I MAss space across a strange problem.
I chose a number of elements drawn ,And then I needed them again in the future I choose, Thus after selecting elements Click on the Save
Selection And I value Enter for selected elements.
Now that I'm on Manege Selection panel is not,Is not Load Selection Options.
In none of the family environment.....
When we choose an element appears,But the project environment There are icons at the Manege.
Project Tab:
Mass and Family :
View 4 Replies
View Related
Jan 16, 2013
I am creating a tunnel with a profile consisting of multiple radios. In the attached images can be displayed. The problem I have is that by selecting one of the two tunnels and create a void with the profile of the second tunnel and perform cutting geometry indicates that I can not and I get the error message.
If I perform the same exercise to select a tunnel and create a void with a square profile, rectangular or cylindrical deaja if I make the cut geometry. I select the void that did work and edit it to add the profile you require and at the end of the model throws me the error again.
We are working on four computers of the same features and the same version of Revit Building Design Suite 2013, has installed the update 2.
View 1 Replies
View Related
Mar 2, 2011
I assigned to each mass floor an usage, and my schedule functions well . That tool is wonderful, isn't it?
But I would want to display each usage in a different color, to show my client how I am organizing the building. Is this possible? Mass floors seems not to have a color or material property.
View 2 Replies
View Related
Nov 16, 2011
I am trying to create a mass surface that is being cut by a topo plane. What I am trying to achieve or show is a height setback set from the existing topo to a height of 35'. I've tried to cutting or joining the two geometries but this will not work. There is no way to snap t the intersection of were the mass and the Topo surface meet. Is there a way to change a Topo surface into a mass? Any other way to achive this instead of massing and topo surfaces?
View 5 Replies
View Related
Aug 16, 2013
I have created a schedule based off some OFCI ( Owner Furnished Contractor Installed) Items. Some of these items cannot be found online or in the revit library (such as a spectrophotometer). So I created a mass and identified type marks for these items. However, I cannot seem to get the mass items to show on the multi-category schedule. Is there a way to do this or another way to create a schedule that includes mass and equipment?
View 1 Replies
View Related
Feb 25, 2014
Is this a Revit Hard Code issue or am I overlooking something? I have created some In-Place Masses (with floor mass for each level) and I have created 2 Project Parameters for for the Mass Schedule. Parameters are Block and Sub Block as Text under Identity Data and in the Mass Category. When the Mass Heading is ticked all mass categories are ticked. So Im thinking, it should not matter what type of Mas schedule I setup. The Parameters should be available in the fields.
The Schedule is created as a Mass Schedule. and the Parameters show up in the field and data is populated as I expect.
I want to create a Mass Floor Schedule and the parameters are not showing up in the fields list. Also I can not Add Parameters from the Schedule dialogue window as those Parameters has already been created. When I select the Mass Floor in a 3D view the Identity Data fields in the Properties window are mostly greyed out. The Project Parameters do not appear as Identity Data fields and the Edit Type is greyed out (not that Edit Type maters but it adds to the thinking process)
View 8 Replies
View Related
Apr 18, 2013
I am trying to create a sloped wall by creating a mass in-place. First I draw a line on a surface at a pre-determined level that I've set up in elevation. Then I offset this line in the vertical plane. My next step is to offset this second line so that it is not directly above the original line, but offset in the horizontal plane. How do I change from a vertical to a horizontal offset? I’ve tried different work planes, but they all offset vertically.
View 6 Replies
View Related
Sep 19, 2011
I've created an irregularly shaped mass (column corbel) within a project and would like to make it a concrete object. How do I do this?
View 1 Replies
View Related
May 8, 2008
When I apply a curtain system to a mass, the curtain panels flip inside to outside as shown in the attached image, when applied to a curved mass surface. Additionally, if these systems are applied independently the system justification (beginning and end) is reversed.
View 5 Replies
View Related
Feb 24, 2012
I have a revit structure and revit architecture model and I want to combine them. I keep seeing tutorials on how to bring arch into structural, but i only have arch, so can I put structul into arch?
From what I understand, this is the steps, but I cant get it to work
Open arch file
select link revit
select structural file
but then i never see it open.
View 3 Replies
View Related
Jul 6, 2013
We are currently designing a Highways project which includes a cut and cover Tunnel (dual 3 lane through goes underneath a signalized at grade junction). Navisworks will be used for clash detection of all disciplines. To clarify the cut and cover structure will be similar to a large box culvert. Although new to the software; the Highways team will be undertaking the Civil Highways design in Civil 3D.
My question is - what is the best Autodesk solution for the structure and associated retaining walls? Note at this stage we are unsure what all of the design components will be (e.g. pump room for drainage etc). Previously the Structures team would have produced a 2D design (however 3D modeling is a requirement).
I have seen on the internet Civil 3D and Revit Structures being used interactively (although it appeared to be incorporating bridges only). Is Civil 3D able to affectively model this structure and retaining walls within the subassembly composer? Or is the question more to do with how the Structures team will complete their design (i.e. reinforcement detailing / scheduling etc).
View 4 Replies
View Related
Dec 9, 2013
I have a problem with my revit 2013, I have to change one of my walls structure, but as soon as i hit ok the message "Pads can't overlap (but can share edges)" pops up, I cant understand where the problem comes from because I am not changing pads boundary!
View 2 Replies
View Related
Jul 22, 2013
I am trying to create a glass roof structure over a staircase (see attached image - underground roof). I thought that I would do this by creating an in place mass, then adding either a roof or probably more likely a curtain wall system to the faces. However I am struggling to create the mass. I have made a wireframe of the roof (wireframe) using lines where the roof folds are, in autocad. I have then linked this in to Revit.
When I come to creating the Mass, I can only place lines using the "Pick line tool", which then only places lines on a specific reference plane (level 1,2 etc), so I only get a 2d footprint of the area I want to create this mass.
If I try to create a mass face using the 3d snapping tickbox, Revit fails to register that there are any lines for me to snap too. I have tried to "Tab", but this doesn't work either.
View 9 Replies
View Related
Oct 22, 2013
Attached is an image of one of the many Complex pipe structures that I am working on for steel fabrication (family), what I am trying to achieve.
I am creating these pipes using sweeps with reference lines at their centres, then I trace over them in 3D using pick path command when creating the extrusion. Is this a good way of doing it?
In trying to draw this particular element I have hit a problem. Drawing the curves that join the straights has become difficult as the straights don't align easily, and so I was wondering if there is a way of creating a reference plane by picking 3 points in 3d? This would be really, really useful!
The curve at the top left of the 'plan' joining the straights is difficult to draw as the straight on the left comes back at an angle and not perpendicular to say the rear vertical pipe work, which is drawn using another plane. I have managed to draw this so far by aligning it by eye, a dodgy way which is not really acceptable.
Found a way I think. A major part of the problem is that you cannot draw a reference plane in 3d! So after I have oriented to a plane perpendicular to the direction I want to draw, I then can draw an extrusion and then rotate the view in 3d and pick the face of the extrusion that aligns with the plane I want to draw on. A bit finicky really. Is there a better way?
I have used the align to plane in 3d
Using Revit 2012
View 2 Replies
View Related
