Is there any method to create sweep or shaped object in mass (should be in dimension) using Revit 2012.
The creation of sweep/revolve/blend is not available in Mass of Revit 2012.
Because the method of mass is difference comparing to Revit 2008 with Revit 2012.
I am creating a tunnel with a profile consisting of multiple radios. In the attached images can be displayed. The problem I have is that by selecting one of the two tunnels and create a void with the profile of the second tunnel and perform cutting geometry indicates that I can not and I get the error message.
If I perform the same exercise to select a tunnel and create a void with a square profile, rectangular or cylindrical deaja if I make the cut geometry. I select the void that did work and edit it to add the profile you require and at the end of the model throws me the error again.
We are working on four computers of the same features and the same version of Revit Building Design Suite 2013, has installed the update 2.
I am trying to create a sloped wall by creating a mass in-place. First I draw a line on a surface at a pre-determined level that I've set up in elevation. Then I offset this line in the vertical plane. My next step is to offset this second line so that it is not directly above the original line, but offset in the horizontal plane. How do I change from a vertical to a horizontal offset? I’ve tried different work planes, but they all offset vertically.
View 6 Replies View RelatedWe just noticed that the imported cad geometry in a Mass family will not cut in a floor plan view which contains a plan region. Regardless of the location or height of the plan region.
View 4 Replies View RelatedWhen I import a AutoCad 2D file (include several layers) into Revit, how can I extrude layer by layer (for having mass )? I mean I need to have a chance for selecting my layers separately in Revit (like in AutoCad) and then create Mass by layers.
View 2 Replies View RelatedI need to export many library elements (conveyors) which are saved in individual blocks to mass objects. I need to convert them to IGES after that.
Until now I have to open every single block and convert all of it to a mass element. This simply takes too long.
Is it possible to write a small script or program which converts all blocks or the selected blocks to mass elements?
- 2500K @ 4.2Ghz- 8GB - Radeon7970 -
- Xeon 1230V2 @ stock Ghz- 32GB - Quadro 2000 -
I am trying to animate a mass production plant where objects move along conveyor belts.
When I apply pathdeform modifier to a single object with defined curved spline, there's no problem with the animation.But when I attach multiple objects to form single polygon the deformation path messes up.Objects astray from their initial positions before attaching.
Seems like Inventor ignores wires and cables when calculating mass of the whole assy.
View 1 Replies View RelatedI have a relatively simple mass modeled in Rhino that I imported to a Revit Mass Family (via .sat file). I then placed walls, roofs, structure on the face of this mass. However I would like to be able adjust this mass, either in Rhino or Revit and the walls and structure adjust accordingly. Now however, if I reload the mass into my Revit family, and then reload the family to my model, and then attempt to Update to Face, the error "Faces defining this Element cannot be reacquired." and my only option is to delete the offending wall/roof etc.
Is this just a limitation in Revit/Rhino, or am I totally doing it wrong?
I'm following a "Simple Mass Creation" exercise in a Revit book, which says to create a cube, a sphere, and a pyramid. It doesn't say how, though, it just goes on to the next step of dividing the masses into floors. After much research and trial and error, I figured out the cube and sphere, but how the heck do you create a pyramid? At first I was thinking of a blend, from a square to a point, but that's not an option. Then I tried to use void shapes to remove parts of a cube...and I'm getting an error message because my voids are overlapping and there's no solid to cut. There MUST be a faster and less complicated way to create such a basic form.
View 5 Replies View RelatedI have a colleague who has counciled me that sometimes it makes sense to create mass-elements for complicated gabled roof elements. Since I am pretty darn new to Revit, I am bringing in some old 2D dwg information (plans and elevations) and I'm trying to use this information to generate an in-place mass that is my roof. I'm essentially extruding gabled roof information from this geometry. So far so good. But when I try to rotate this information I find the program unwilling to do this. I have a suspicion this has something to do with the fact this in-place mass is either being hosted by the intitial horiontal working plane, or it is "pinned" to something I don't want it to be pinned to.
View 9 Replies View RelatedI've drawn a cross section,When I select them,I choose to create forms,The following warning appears.
View 2 Replies View RelatedIs there any way to change the appearance of a mass imported into Revit? I simply want to change the dark grey that shows in the rendered view and/or the white that shows up in the shaded view so I can control how background buildings (imported through google earth/sketch up) look in my drawings.
I do not want to rebuild the masses with walls, ceilings, etc, because they are just background site elements. I have tried to do this through object styles. I have tried to do this through "Override by Element" and "Override by Category". I am importing the files as in-place masses and there is no way to edit materials because "Materials" doesn't even show up as one of the element properties.
I have problem when i try to use function analyze mass model in revit building they show message like attached file.
View 1 Replies View RelatedI MAss space across a strange problem.
I chose a number of elements drawn ,And then I needed them again in the future I choose, Thus after selecting elements Click on the Save
Selection And I value Enter for selected elements.
Now that I'm on Manege Selection panel is not,Is not Load Selection Options.
In none of the family environment.....
When we choose an element appears,But the project environment There are icons at the Manege.
Project Tab:
Mass and Family :
I assigned to each mass floor an usage, and my schedule functions well . That tool is wonderful, isn't it?
But I would want to display each usage in a different color, to show my client how I am organizing the building. Is this possible? Mass floors seems not to have a color or material property.
I am trying to create a mass surface that is being cut by a topo plane. What I am trying to achieve or show is a height setback set from the existing topo to a height of 35'. I've tried to cutting or joining the two geometries but this will not work. There is no way to snap t the intersection of were the mass and the Topo surface meet. Is there a way to change a Topo surface into a mass? Any other way to achive this instead of massing and topo surfaces?
View 5 Replies View RelatedI have created a schedule based off some OFCI ( Owner Furnished Contractor Installed) Items. Some of these items cannot be found online or in the revit library (such as a spectrophotometer). So I created a mass and identified type marks for these items. However, I cannot seem to get the mass items to show on the multi-category schedule. Is there a way to do this or another way to create a schedule that includes mass and equipment?
View 1 Replies View Related Is this a Revit Hard Code issue or am I overlooking something? I have created some In-Place Masses (with floor mass for each level) and I have created 2 Project Parameters for for the Mass Schedule. Parameters are Block and Sub Block as Text under Identity Data and in the Mass Category. When the Mass Heading is ticked all mass categories are ticked. So Im thinking, it should not matter what type of Mas schedule I setup. The Parameters should be available in the fields.
The Schedule is created as a Mass Schedule. and the Parameters show up in the field and data is populated as I expect.
I want to create a Mass Floor Schedule and the parameters are not showing up in the fields list. Also I can not Add Parameters from the Schedule dialogue window as those Parameters has already been created. When I select the Mass Floor in a 3D view the Identity Data fields in the Properties window are mostly greyed out. The Project Parameters do not appear as Identity Data fields and the Edit Type is greyed out (not that Edit Type maters but it adds to the thinking process)
I'm now working on my diploma work and I need to model a gridshell construction in Conceptual mass.I created the form and made adaptive component -a glass panel.I uploaded it in the family and now I need to load that family into the project space and I don't know what to do..I will have to remove the mass eventually before rendering but then the gridshell structure will disappear.I don't know how to make it real,I cannot use massing and site with this, I'm obviously missing some steps and i don't know which ones..
View 1 Replies View RelatedI've created an irregularly shaped mass (column corbel) within a project and would like to make it a concrete object. How do I do this?
View 1 Replies View RelatedWhen I apply a curtain system to a mass, the curtain panels flip inside to outside as shown in the attached image, when applied to a curved mass surface. Additionally, if these systems are applied independently the system justification (beginning and end) is reversed.
View 5 Replies View Related In "Categories" of the filters window, it can be selected things which composes its mass, such as Mass Exterior Wall, Mass Glazing, Mass Roof. And these things can be clicked only after its mass become energy model.
I set up a filter rule of Mass Roof and applied it to V/G Filters of a view, but it did not displayed in Analyze Mass Model, the same as Mass Exterior Wall, Mass Glazing.
I would like to know whether it is possible (and how) to trim a wall that was generated from mass face to a roof (also generated from face mass) or/and make a horizontal hole in it. The wall itself is not straight or curved, it shifts outwards from the building from base to top (still in an elevation it looks like rectangle).
View 2 Replies View RelatedI've been looking for a solution to remove the unit string ie Lbs, g, kg from the value given from a 'Mass' value in a text string.
As you may all know, creating text and having a 'physical property - mass' value...the unit string is there...
Lots of people on here have the problem...no-one has got a solution.
Until now...
Basically...open the part you need to get the mass property of in your text string.
Follow the instructions on this webpage...this is the first part...
[URL]
Basically, this creates a Mass property value in the parameters table that you can call on as a text parameter.
It's similar to the custom iproperty model - mass but NOT the same.
Once you have done this, you can go to the drawing of the part and create a text string in the drawing and call it up as shown in this procedure. BUT it still has the unit string.
Here's the best bit that you want to know...
To get RID of the unit string...open up the part again from the drawing...click on the parameter icon...find the user parameter...in the Nominal value column, right click on the value and you get a pop-up that gives you 3 options...
Custom Property Format, Make Multi Value & Delete Parameter.
Click on Custom Property Format.
The pop-up window comes up...showing you the property type...in my case...the 4 left columns read Text, g (grams), Format & Precision...
On the right hand side I have a Preview of the text...then 3 check boxes...Units string, Leading Zero's, Trailing Zero's.
Units string is checked.
Uncheck it.
Close it...Save your part...go back to the drawing and hey presto!...the text now shows the weight you require as a straight value...no units!
I want to turn my in-place mass walls (sloped or helical) to structural walls but i don't know how to do it. I'm able to do the walls but when i switch it to the analytical view the wall doesn't appear because it's not structural. It's there a way to do in-place mass structural walls.
View 1 Replies View RelatedI found much info on creating 3D objects above X Y plane (which is Z), but I haven't been able to find info on creating objects on the underside of X Y plane (sub Z).
I need to create objects above and below X Y.
CorelDraw X5
I have drawn a shape as you will see in the attached. The white 'arches' are not there as objects in their own right, they are as a result of the orange objects and the yellow ring.
I will be passing this to a laser engraving machine and need to cut-out each object seen in its own right, including the 'arches'. Clearly in a normal printer I could just put a coloured circle behind the other objects but on a laser I need the actual shape.
I don't want to manually try to fit a bezier as the cut-out parts need to be a perfect fit as it is going to be an inlay. Each colour will be a different type of wood. Is there a macro tool that would do it?
I have this laptop object image (laptop_img.jpg) and I want to create a mirror effect like mirror_img.jpg.
I understand that using stamp tool and doing some rotating can achieve this effect. But however, no matter, how many 90 degrees I turn for this image, I just can't achieve the mirror effect.
how to create mirror image for all objects.
I'm trying to create some realistic glass tube-like objects, but I can't seem to get it right. but the main problem i've run into is that if the background is clouds,or something that doesn't have a lot of definition and color variation, it really looks nothing like glass.
View 1 Replies View RelatedI created a square and make it as a region. I just realize that they are consist of two kind of overlapping objects.
One is four lines that formed a square and another is the formed square region.
How do I switch the mode back to the AutoCAD classis, which when I create a region, then there only available one object, that is, the formed region.