Is it possible to project an elevation drawn in CAD onto a curved wall in Revit?
The pattern of the cladding is very complicated and varies in both directions (curves) so it was easier to draw in in CAD, but I would like to project it on my curved wall in Revit, co that I could calculate the cladding areas accurately.
I can make a curved wall, now I need to make a "cylinder" wall or a closed curved wall. If a curved wall can be closed I cannot figure it out.
View 4 Replies View RelatedI have a curtain wall I need to make, but I need it to be curve on elevation. Its an arch. I can do it on sketchup but I need autocad precision to establish the modules. I have this division settings, horizontal 3.111 vertical 3.559m.
The profile arch has a 40.062m radius. 27.741 arc length. and a total angle of 39.673.
My question is, how can I bend the curtain wall??? I can make a flat curtain wall to follow my referenced base curve, but I need tu curve it in elevation. Here is a demo view from sketchup.What i'm trying to do is the coloured face.
I am currently working in a facade that has a stylized gondola on it. The gondola has curved walls for the sides, and I need to have the curved cut to give it the shape. The tools I know are for straight walls, not curved. and the Opening/wall makes a squared opening, not curved.
View 3 Replies View RelatedI placed walls at 12'0" elevation as they wereconflicting with walls below (overlap). I can't see them in plan view - In 3D iso view they are visible.
View 4 Replies View RelatedACA 2011. I would like to copy the "standard" wall style add a surface hatch and display that in an elevation (exterior) view. I have played around with this and due to many different places to edit the materials.
I have the elevations created. When I go back into the construct and edit the wall style do I have to re-create the elevations to see the hatch? Or I think I just have something set incorrectly in the style.
I created a curved curtain wall based on a reference curve. I set the divisions and mullions and everything seems to be working like its supposed to except for a the mullions and the infill panels. First, the mullions vertically and horizontally dont seem to line up nor have any way to miter with themselves. They should because they are extruding along the same center point. This should be simple but it doesnt seem to work. Second, and the most annoying, is that the curtain wall infill panels dont seem to know where they are supposed to cut themselves. They leave themselves stranded at the ends for some reason and none of the settings for the panel or the curtain wall itself seems to address this. I thought it might have to do with the center point of the profile I used for the frames and mullions but apparently they dont and I dont have control of it. Seems like it should work a little more cleanly. Unless it is some sort of bug in ACA 2013.
View 1 Replies View RelatedI can't put my nested window family in a curved wall. Where the problem could be situated? It has to be a normal straight window so I use my nested window families from other projects. I compared my NWF(nested window family) with the ones autodesk provides with revit but I don't find the difference. The NWF from autodesk work in a curved wall.
View 2 Replies View RelatedFor a very long time I have missed to able to edit profile on a curved wall. It seems so basic and yet it has not been possible. So I was very pleased when it was pronounced that this basic option was finally possible in Revit 2012. Alas it is not. I am so very dissapointed because this is a basic feature wich should have been fixed years ago.
Any simple method to edit profile on a curved wall without having to attach wall top and buttom to invisible layers of floors and roofs ect.
I am working on a building that will have a cornice running along the top of the wall. This is easily handled by a wall sweep. However, at a point along the length of the wall, the wall will have an arch along the top of it. I tried adjusting the profile of the wall, but the parapet (wall sweep) does not conform to the curve of the wall.How would you model a curved wall with a cornice.
View 4 Replies View Relatedi drew a curved wall. now when i select it revit doesn't give me the option of an edit profile button as it would with a rectangular/straight.
View 6 Replies View RelatedHow to add trim or diagonal sweeps to a curved wall. I have a circle top window in a curved wall and I need to add 1x4 trim around it.
View 1 Replies View RelatedIs there a way to avoid super Elevation or Side Friction in Sloped Surfaces for Curves, such as Building Pads, Ramps, Floors, etc.. Is it mandatory.. ?? Its a problem all the time worrying about matching levels in topo surface and floors for gradual slopes in site and side friction in sloped ramps or sloped building pads.. that matching line between levels doesn't look good while giving presentations..
I have also attached an image for reference.. both the sloped surfaces are building pads..
I'm attempting to create a wall style that has 2 components, a framed wall and a brick veneer. What I would like to do is have this wall react a certain way when I insert a window. Basically, I don't want the window to cut into the brick veneer, only the framing.
I have attached my attempt so far, and I have not figured out how to get the window to only cut the framed portion.
I am having trouble cleaning up different wall types joining at or close to a corner. I tried to over ride the clean up radius....no luck.
View 9 Replies View RelatedI can convert a wall to a curtain wall but not a curtain wall to a wall. When converting a wall to a curtain wall I select wall in the design pallette right click apply to wall select the wall and it changes to a curtain wall. When I try converting a curtain wall to a wall I right click on curtain wall select apply properties to wall then go to select the curtain wall but I cannot select the curtain wall as a wall?
I simply want to convert an existing curtain wall to another wall type how is that done/
I have a really curvy sculpture. How do I draw the dimensions of the elevation for it?
I have attached a picture of my drawing. I was told to do gidelines and show the dimension of them. However I find it not very accurate for the contractors to read.
Having a time getting ribs to align 2m below top of ridge beam, and connect to curved wall below. I created one, then arrayed, but the radius changes at each 2.5 degree interval. I don't think I should have to calculate the % radius change to get the beams to do this. Some constraint button maybe?
Not sure if editing a wall profile is the best way to model this, but it's working.
draw an interior wall elevation using the Golden Section as a basis for my design. I downloaded the AutoCAD 2012 version and it seems very hard to use.
View 5 Replies View RelatedAny way to get a wall sweep that's set up in the type/structure properties to follow a wall if that walls profile has changed. For example, in the image below, I've split the wall and adjusted it's profile to create some cheesy angled parapet. How do i get my wall cap to follow along? I thought splitting it and changing it's height would work, but no. And if I change the profile without splitting the wall the wall cap just runs right through the wall, as if the profiel was never even changed.
View 3 Replies View RelatedI have to draw a bulkhead wall that connects to a full height wall and a gyp bd ceiling. This causes the entire end of the full height wall to skew in line with the butt joint above the ceiling level. I tried Wall Joins but all the options screw up the bottom half of the wall which needs to remain in line with the paired opposite. I also tried editing the sketch of the wall profile but Revit couldn't keep the elements joined. I tried trimming the two walls back together afterwards but the wall profile dominates and prevents a clean join above the ceiling.
Surely there's a way to have different kinds of joins at different heights?
I am trying to align the curtain wall with the edge of the concrete slab/face of wood framed wall (Core). I have tried to align and move however the whole wall moves as well as the edge of the slab. How I can move the Curtain wall leaving the other elements in place?
View 2 Replies View RelatedRefer to the attached file. How can I cut the RED part of the Wall 1 (W1) , where Wall 2 is sloped. I also want to cut a hole in wall 2 (W2) by the BLUE rectangle , but why I can't do that .
I also want to add a second floor to my project but I can only see the" Level" icon goes grey and I can't click it.
When I try to change the length of a wall it grows at both end. How to grow at one end only?
When I change the wall type to one with a different thickness, I cannot control which face of the wall remains fixed and which face moves. eg: change from 130mm to 250mm screws up my room width. How do I do this?
I am trying to make a floorplan of my house in Revit 2013, but I am having an issue when it comes to one wall in my house. I have an opening in the Master Bedroom that leads to the bathroom. This wall has a weird arched-like opening in it and I have no clue how to make this in Revit. I have attached a sketch.
Also, my exterior walls are 7' tall but the interior walls start at 7' and go up to 8' once in the middle of the house and reduce back to 7". How does one set that up in Revit?
EDIT: May have made the image too small to see, but the top is not arched, it is actually half of a decagon.
I have a question about wall profiles. I want to make a profile on a wall so I can make Zinc Panels on the wall that are 10" X 20". I've attached a picture of what I'm going for. I'd like it to have a 1/2" spacing between them and with a joint depth of 1" and I'd like to do this is the wall type so that I can use this wall in multiple places rather than having it model-in-place. Anyway I have made a profile that is 1" X 10" so that it can become my panel profile. But when I go to add it to the wall as a wall sweep as I have seen people do I get hung up on how to make it tile up the wall and also I don't understand how to make the profile so that it is 20" wide. I have a screen shot of where I'm editing this too. Below is the link of the site.
View 8 Replies View RelatedNew to this forum but pretty proficient in photoshop for self-taught.
I've figured out everything I've ever needed to do in Photoshop and Illustrator on my own, but this one has me stumped!
I'm familiar with warping and the other free transform tools, but can't piece this one together...
Assuming I have a grid of icons equally sized and spaced, how can I make my image curve in 3d with perspective, like in the attached image?
am struggling to curve some text (TEMPO TANTRUM) up a curved tunnel wall in this flyer I am working on.
View 1 Replies View Related“Drag wall end” to the edge of the wall (indicated),In the attached screenshot, I wanted to drag the end of the temporary dimension from its location to the end edge of the wall but sounds not to respond!
How this temporary dimension can be dragged to the edge of the wall?
I'm tryin to create an an elliptical wall. 6" Thick.It needs to go from 48" at one end and lower to 36" as it sweeps around the ellipse. (It's only an arc of the ellipse and not completely closed).
View 4 Replies View Relatedhow one would go about creating a garage door that slides around a cruved 90 degree track? I.E. has 5 VERTICAL divisions and slides around a curved track to rest flat against an adjacent wall?
View 1 Replies View Related