I've just performed a clean install of Lion on my MBP 2.4Ghz Mid 2010 with 8GB RAM running Photoshop 12.0.4 and lag when dragging or resizing windows. It's the only app running and I'm testing on any size file i.e. one that's blank and just bee created.
Â
I've done the following:
Â
- Restarted the Mac
- Repaired the d
slice tool. when i'm slicing something the dotted lines wont show while dragging/resizing, and i dont know why they just disappered.
View 7 Replies View RelatedSoftware: ACAD LT 2010. Recently I upgraded to a new computer and Windows 7, from Win XP. Now ACAD is lagging and dragging. Also, sometime it takes forever to open a file.Â
Here are my new computer specs.
Dell Precision T3600,MT,425W
Four Core XEON E5-1607, 3.0GHz, 10M, Dell Precision T3600
I don't know what combination of keys I inadvertently pressed, but now when I am in standard screen mode and press Ctrl+ to zoom and enlarge my window, the window actually shrinks to a skinny rectangle (while the image gets larger inside it). The window will expand vertically, but not horizontally. Very annoying! Anyone have a clue how this happened, and how to change it back to normal?
View 1 Replies View RelatedThe instructions in Adobe Photo Elements 11 Classroom In a Book are the classic Windows "Drag and Drop" Method. However, when I try to do it, the cursor/icon I am dragging turns into a gray circle with a gray diagonal when it reaches the Media Browser pane in the Organizer and the folder/photo is not imported into the Organizer when I "drop." Do I need to change setting in Windows (Vista, SP2) or Photoshop Elements 11?
View 3 Replies View RelatedI'm refining some SVG files, imported into GIMP as paths. I added numerous guides on the images and drag anchors to the guides. All the paths consist of straight lines only. The problem is that on some anchors GIMP performs the "drag curve" operation instead of the "drag anchor". As a result, my straight lines become broken (curved).
The only solution I've found so far is to apply maximum zoom level, say 400%, and repeat the dragging in this resolution. This makes GIMP work properly, at least, I'm able to "drag anchor" as expected. But switching back and forth to the 400% zoom level is a bit annoying and inconvenient.
Is there a better way to "say" GIMP that "dragging anchor" is the "dragging anchor", not "dragging curve"?
I need to be able to re-size images that are large than 1MB in order to put them on our MLS site.
My previous computer had 2 arrow icons on the desktop.
One was for re-sizing horizontal pics and the other for re-sizing vertical pics.
I could simply drag/drop the image file onto these re-sizing icons and they would be re-sized.
The smaller file size thumbnail would appear on the desktop.
How can I get these re-sizing tools on my new computer's desktop?
I am using CS6.
Whenever I drag in a new image from my desktop or some other directory, and place it in Photoshop it always acts as a new layer on the thing that i was working on before, and as a smart object.I know I can drag it into the bar up top, but honestly that's such a small area, so it's rather annoying. I find it more convenient to be able to drag the image just about anywhere, and have it open as if i went File>Open
 Â
I might even go back to CS4 just to be able to avoid both problems by letting documents float, and not open each image as a separate window in the taskbar.
in cs5 to drag a 3d shape or object into a new document or another image was done by the move tool.what tool in cs6 extended replaces the move tool to drag images into another file or image.
View 2 Replies View RelatedI have got a GIF image of a push pin that I'm trying to drag onto a JPEG photo. I 've got both images open, and when I select the move tool for the push pin GIF, it starts to drag, but won't move across to the JPEG photo.
View 4 Replies View RelatedWhen I drag an image into Photoshop, it is TINY. It doesn't matter the resolution of the image. It could be the biggest image in the universe and it shows up so small to where I have to use Free Transform every single time. Even the eraser is so small that I can't see it. It can be on 2500 but the eraser is a dot.Â
Â
Is my Photoshop on a certain setting that I can change? This is my first time using the software on my new Macbook.
I've been working with the tutorial link below to get rid of some stains, While I have no problem working directly on the channels, I'm lost as to what it means to drag the channels onto layers. I can't seem to find a reference as to how to do this. Most likely I don't have to correct term when I'm searching.
Â
"I normally drag the channels out onto layers to make the repairs. This gives much more control, especially if graduated masks are required. On this occasion and for the sake of simplicity I've made the repairs directly on the channels."
Â
Tutorial Link [URL].....
I'm working on some websites and my workflow is being slowed down because after installing the new Photoshop CC I tried dragging images from websites into photoshop to open them and create a new image over it WITH the same size as the previous image I dragged in.
I had no problem dragging and dropping images into photoshop CS6 before this, but now images are not opening when I do so. (I have to manually go find the image in the images folder thru dreamweaver first, then hunt them down and open them manually thru photoshop.)
Trying to create a header. I created the buttons in a separate psd file and when I click and drag the buttons into the other canvas (my header) I'm having trouble when I click ctrl + alt + shift to duplicate the new buttons. Some layers are getting left behind. Should I flatten or merge the layers of the button before I click and drag the button into the other canvas (header)?
View 1 Replies View RelatedI have a image that displays the following....
This template has been shrunk down to
300 DPI for file size reduction, it is actually
1200 DPI. To size it back up to 1200 DPI,
Lock all of these layers and then open up
a new 1200DPI file (width 3.4,height 2.2)
and drag these locked layers to that file,
then hit Ctrl+T then hold Ctrl+S and resize
the template. The template will look and
print much clearer after it’s re-sized.
I have a mac and photoshop cs3
I am trying to drag 4 small photos 2x2.5 onto a blank 4x6 but they won't stay there.
I just tried with the same photos earlier using a 72 dpi setting for the small photos and the blank 4x6 and they transferred ok.
When the first 4x6 blank with the 4 small photos on it was sent to Costco to have it printed it wouldn't work because the resolution was too low.
I have increased the resolution of all of the photos but now I can't get them to drag onto the 4x6.
I have the same resolution for the blank 4x6 as the small photos.
They are all jpg.
I am trying to move the layer to another ducument, to the same position. (photoshop)
Â
But whever I drag it, the layer goes to the center of the new document even while pressing the shift key. (both of the document sized are same) I think it worked before, don't know when but now, it doenst work as I expect.
Â
What should I do?
I like in CS6 when I use the marquee to select, as I am dragging it is actively showing me the size I am selecting in pixels (what you can find in the info panel).Is there a way to have this in CS5.5? It is a lot easier than always opening the info panel.
View 2 Replies View RelatedCC has changed how a stroke responds when dragging the line segments with the direct selection tool. No the direction point moved independently instead of maintaining the same angle from their anchor points. I simply want to drag the line segment and change the distance of the relevant directions to their anchor points.
View 1 Replies View RelatedWould prefer to not see the numeric readout while making selections. Can this be toggled?
View 1 Replies View RelatedBefore, whilst in Google Inspect on any webpage I could drag an image onto the Photoshop application icon on the dock = opens up in Photoshop + with PNG transparency.
Â
Now this has stopped working for an unknown reason about 2-3 months ago after updating. I'll drag the image over the application icon on the dock as before, but then nothing opens. As a result, my workflow is now more inefficient and inconvenient. Â
I recently had to reformat my hard-drive, and now I am having a problem getting files to open by dragging a file (.jpg, .png etc.) onto the Photoshop Icon on my dock. Normally this would open the document in Photoshop - instead, nothing happens. I assume I need to turn a preference or something on...
View 5 Replies View RelatedI recently upgraded to CS3, and I'm getting quite frustrated at it.
I am used to having to select a layer from the layer panel to move it around. Now, whenever I click on something in the image, it auto chooses that layer and let's me move that around. I'd rather not have it set this way. I like to be able to click anywhere while my chosen layer is selected and be able to move it.
It's especially frustrating when I have things in groups. Instead of just moving the layer clicked, it moves the entire group.
Is there a fix to this in the preferences somewhere? I've scoured the menus and can't find anything relevant to this 'feature'.
Is there anyway to change the brush tip angle while and during dragging a brush?
Are there other guides which are not on the x y axis, which ideally could pivot around an adjustable anchor point?
Like in Ill. 10, is there a stroke integer less than 1px?
You know those "warp a celebrity" flash or java games where you click on part of the celebrity's face and drag the mouse, and the image warps? Can this sort of thing be done to your images in photoshop 6.0? (That's the version I have)
If this can't be done in Photoshop 6.0, does anyone know of a simple freeware program that I can use to warp images "celebrity warp" style?
Why does an image darken while dragging the window within Photoshop CS4?
Once the window is released with the mouse/pen, it snaps back to how it was?
Explained further:
Open an image in Photoshop CS4.
Click & hold the grey title bar at the top of the image.
Move it around within the Photoshop window.
It noticably "pops" - darkens.
Release the mouse/pen, image snaps back to how it was.
Weird
I've put a sample point on a section of the image, numbers don't change.
I've tried disabling "Open GL Drawing"
- Doesn't happen but...
- Image appears darker as per when dragging with "Open GL Drawing enabled.
- Numbers remain the same on the sample point.
Hope this makes sense.
Here are some specs:
Photoshop V 11.0.1
Graphics Card: NVidia GeForce 7950 GT
Driver Verssion: 182.08 (latest)
Windows Vista Business, 64-bit (Service Pack 1)
8GB RAM
I'm having an issue which is repeated on various machines running PS CC on bother Mavericks and Mountain Lion.
Â
- I have multiple documents which have a smart Liquify within each...
Â
- I make an adjustment curve on one, and need to drag it to the other open documents - as I do this the mesh data is read again and liquify re applied - but usually applies it incorrectly - this occurs irrelevant of image size, whether the document has image outside the crop area, I've tried selecting canvas before liquifying and before applying curve...
Â
I can solve this by rasterising the smart object on the recepient file - but this isn't ideal for the smart object work flow.
When I drag a layer mask to the trash, it applies the mask instead of deleting it, removing all masked out pixels. I don't believe this was the case before CS6. Is there a way to adjust this setting and make it simply delete the mask?
Â
Right-clicking still gives me the option to delete the mask properly.
-------setup:
ps cs 6
win 7 64
dual monitor setup
Â
preferences -> perfomance as follows:
use graphics processor: ticked
advanced settings:
drawing mode: advanced
everything else in advanced is also ticked
Â
problem:if i drag an image on my secondary (image editing) monitor the images saturation/color changes while i drag it. on mouse release it goes back to normal.this doesnt happen on my primary (system etc) monitor.yes i could probably workaround making my editing monitor my primary monitor, but i don't want to, because i want it free of windows bars and similar rubbish.
Using CS6 Mac, I am un successful in dragging and dropping a scanned image from PS to Illustrator.In the past i was able to do this with CS3 PC.
View 6 Replies View RelatedI'm writing because after reinstall the Mountain Lion (10.8.4), I realized that dragging an image from Chrome (29.0. 1547. 62) to the dock icon Photoshop CS6 the icon is not active and therefore the program does not open with the image, I tried with firefox (23.0.1) and the dock icon photoshop is animated and open photoshop but show the following message "Could not complete your request because Photoshop does not recognize this type of file." I tried with SAFARI and all fine, without problems. I note that before reinstallation and after doing a clean install (I do a back up, I formated the hard drive and install the mountain lion) this option worked perfect.
Â
I check the following path ~ / Library / Caches / TemporaryItems that is where store the pictures as you take the browser and when stored in the folder but never open photoshop, I want to emphasize that opening photoshop and open a blank canvas, I can drag and drop (drag and drop) and the image appears, but with the dock icon anymore.
Â
I have many theories but also not solve:
Â
1. It's a permissions problem.
2. Any option is not enabled (OS X or photoshop) or not installed
3. Some kind of incompatibility, but again and worked without problems.