Is there anyway to change the brush tip angle while and during dragging a brush?
Are there other guides which are not on the x y axis, which ideally could pivot around an adjustable anchor point?
Like in Ill. 10, is there a stroke integer less than 1px?
Im drawing in isometric view and want to change the default drawing angle from 30 degrees to another angle.
View 9 Replies View RelatedI have a path with a smooth point. The two direction points form a direction line with any non-45-degree-angle - say 11.8 degrees. I want to drag one direction point while keeping the angle of exactly 11.8 degrees.
Is there a key combination for that (Mac OS)?
CS6 Pen tool, clicking and dragging on an existing path should not change the angle on the adjacent radius handles. It should only dynamically adjust the length of the existing radius handles, based on which direction you drag. It should only affect that one segment and not affect the bordering angles. I've been pathing with Adobe products for 25 years and this should not change now. I want to be able to fine tune ONE line segment without affecting its neighboring segments. The "new" behavior should only occur with a modifier. If the Mothership deems this is the only way to do this moving forward, at LEAST give your long-standing customers a modifier, such as the shift key to enable us to keep working as we have been for decades.
View 6 Replies View RelatedWhy does dragging on a Touch Screen change the cursor into a Hand Tool? This did not happen in CS 5.5 and I could edit on my touch screen monitor. With Photoshop CS 6, as soon as I start to drag, the cursor changes to a hand cursor. I have look at all of the system options and nothing seems to affect it so I have to assume it is something wrong with Photoshop CS 6.
View 3 Replies View RelatedThere are a few things I just don't get about brush settings. Sometimes it seems my brushes go all wonky.
When I change the settings for 1 brush... say I add some jitter to a smooth brush - then suddenly the other brushes get the same jitter applied to them.
How can I set the brushes so that each brush has a different setting that doesn't change when I change any other brush settings?
p.s. I also don't get why Adobe has you lock a brush by UNlocking it? Seems to me it should be the other way around?
I'm refining some SVG files, imported into GIMP as paths. I added numerous guides on the images and drag anchors to the guides. All the paths consist of straight lines only. The problem is that on some anchors GIMP performs the "drag curve" operation instead of the "drag anchor". As a result, my straight lines become broken (curved).
The only solution I've found so far is to apply maximum zoom level, say 400%, and repeat the dragging in this resolution. This makes GIMP work properly, at least, I'm able to "drag anchor" as expected. But switching back and forth to the 400% zoom level is a bit annoying and inconvenient.
Is there a better way to "say" GIMP that "dragging anchor" is the "dragging anchor", not "dragging curve"?
I'm trying to match the style of an illustration done by someone outside my company; all the lines taper at both the ends like an actual brush stroke, but when I used the brush tools I have to change the angle to get the tapered look - is there a trick to this? It's not efficient to have to stop and change the angle of the tool for every stroke -
View 7 Replies View RelatedI'm having a problem with the Blob Brush tool where I can't change the basic brush to something else. Whenever I pick a brush I want and I try draw with the Blob Brush tool, the brush I picked reverts back to the basic brush. Here are screenshots:
I pick a brush that I like first
But when I start drawing with the Blob Brush tool, it reverts back to the basic brush automatically
Am I doing something wrong or is the Blob Brush tool only capable of using the basic brush?
is this possible. A lot of programs auto-duplicate when you drag and press either the shift or ctrl or alt key. Its a habit ive gotten pretty into. Plus, its a little akward for me to go from a left click immeadeitaly into a right click with the mouse. I always feel like i've dragged the object a little bit when I switch fingers. it would be great to just add a hot key of shift+drag to this feature, wouldnt even have to turn off the standard right click option, I could deal with both being there.
View 1 Replies View RelatedThe feature where you can quickly change a brush size/ diameter by pressing Alt + hold right click (for Windows) (In Mac, control + alt + left click) is neat but is there any way to change that shortcut to a different combination? I can't find it in the shortcuts list.
View 1 Replies View Relatedhow to fill an image with a gradient but I'd like to be able to change the angle. Is that possible?I'm using photoshop elements 12.I'd like the gradient to run from top to bottom instead of from top left to bottom right.
View 2 Replies View Relatedwhen i change the angle of an object it effects the whole project, so if i have selected an circle and put the angle of a drop shadow to 90 degrees then i selected a recltangle and set drop shadow angle tp 120 degrees the circle will change to also be 120, does it always do this or am i just doing something wrong?
View 4 Replies View RelatedWhy is it that if i change the "lighting angle" for Layer A in Photoshop Elements 10 it changes it for all my layers?
is this a bug?
I am working in the 3ds Max 2014 tutorials. The specific tutorial is "Drawing Patterns for the Clothes". The subsection is "Use the Garment Maker and Cloth Modifiers to Prepare the Skirt". I am working on the area of the SEAMS to create the PLEATS. 3ds Max won't allow me to change the Crease Angle to 150 as it says in the tutorial. When I position the mouse over the box where the dimensions are, it turns into a hand shape. I can change any other dimension in the SEAMS rollout.
View 1 Replies View RelatedI drafted some point features with 0 degrees angle in one computer. When i check in another computer in same drawing for that features those are showing with 5.579 degrees angle. I expected that some system variable maybe change in that computer. which variable i need to change? If this is not related to system variable how to change this angle.
View 5 Replies View RelatedI made a region of a wedge and I thought I made it the right angle. It turns out - it's not.
I've attached a similar file that exhibits the same problem. Except with regard to the specific requirement for the angle, the attached file pretty much representative of my problem, as it exists in the actual file. It's the angle going back to the wall that needs to be changed.
It's unioned. and feel free to imagine the angle is not correct. How would you change it.
How do I change the default value of the angle that is between <> in the command UCS
"specify rotation angle about X axis <180.00>:"
from 180.00 to 90.00
Is this possible to change isometric snap angle? which is by default set to 30 degree.
View 7 Replies View RelatedSo, I haven't been using Illustrator (CS5) for a two weeks and I always create calligraphy brushes on the go, so I don't save them. However, out of the blue, I can't change the brush diameter to change with pressure nor the other options because they're greyed out.
Im using a Genius G-Pen M712X and mac osx 10.6.8..
I got a problem with editing angle constraint in assemblies. I tried edit property of constraint but it didn't move model. Simply changing Angle attribute of constraint item don't work.
Only way I achieved movemenet is
if(oOccurrence.Constraints[i].Name.Equals(name))
{
AngleConstraint a = (AngleConstraint)oOccurrence.Constraints[i];
Object oEntity1 = a.EntityOne;
Object oEntity2 = a.EntityTwo;
String sVal = "" + angle + " deg";
[Code]...
but this is really slow, as much as changing throught parameter:
if (assemblyDoc.ComponentDefinition.Parameters[i].Name == "d655")
{
Inventor.Parameter invParam = assemblyDoc.ComponentDefinition.Parameters[i];
invParam.Value = Math.PI * angle/180;
inventorApplication.ActiveDocument.Update();
}
I am drawing an isometric drawing. In order to draw a dimension line, the tutor says I have to change the obliquing angle to s0 for left plane and -30 for right plane.
I could find anything in: Modify Dimension Style
Where should I change this angle?
I am constructing a skateboard truck and would like to know how to change the angle of the circle face in the first picture to be at the same angle of the face in the second picture. The highlighted areas have been coloured gold. I have attached the ipt file below.
View 6 Replies View RelatedI have a plan with lots and lot numbering. I made the lot number text annotative and matching view orientation. But when it rotates in the view it rotates about the left justification point instead of middle as inserted into drawing. So I inserted lot numbert text into drawing and changed text to non-annotative, but now i can not change the text rotation angle unless i use rotate command on each individual piece of text (was trying to pick all text and change in properties box). Using feature lines to assist in grading design so not sure if this is an autocad problem or a civil 3d 2012 problem. I can rotate dtext made or inserted in drawing.
View 3 Replies View RelatedHow do I change the crosshair so it is at an isometric angle for drawing?
View 4 Replies View RelatedI want it to be "Angle Right" instead of "Azimuth".
View 6 Replies View RelatedI would like to build an expression that I can use in a label at a structure in a profile view to show the horizontal angle change on the alignment at the structure.
Of course, in the available structure expressions, we do not have the alignment delta angle at that point even though I have a referenced alignment in my pipe network.
Our subdivision code has minimum drop across manhole for different ranges of horizontal angle change.
I want to create a label that shows the minimum drop required at a manhole off it's referenced alignment and I would like to see it on the profile view, because that is where the drop value is relevant.
Almost every time I add a linear gradient to an object I want to change the angle from 0 to 90 degrees.
Is there a script that I could use for this, so that I could assign a keyboard shortcut and press that instead of clicking the box & typing 90 all the time? (i.e. select an object, run a script & it would apply the standard black to white linear gradient at 90 degrees instead of 0.)
Newbie OS: Win7 64bit Ps:Cs6
After a lot of searching i found lots of great info about this kewl tool but i've yet to come across anything that tells me how to go about changing the brush.
so, should i assume this tool only has one type of brush and that i cannot change it from a soft round brush to a hard round or square or what have ya ... ??
i would have thought that i could set it to any brush in the list ... i dunno ... maybe it is right in my face ...
How do I model (or calculate) the fewest welds/fittings required to change angle and elevation in a pipe run, as shown in Option1 below.
For this example the constants are: 8" standard steel pipe, one of the fittings is a standard butt weld 45 (12" radius), bend angle is 70 degrees, and the elevation change is 9". The custom fitting is cut from a standard 8" long radius 90.
Note: Option2 is just shown for reference, I'm only interested in solving Option1
Bend with Elevation change.gif
Just learning 2D CAD and trying to draw a cross section of a timber winder stairs as the strings change angle (I think) at the winder section. Looking at 3nr winding steps.
Setting out a standard stairs is okay, so I have the floor to floor height.