how to fill an image with a gradient but I'd like to be able to change the angle. Is that possible?I'm using photoshop elements 12.I'd like the gradient to run from top to bottom instead of from top left to bottom right.
View 2 RepliesAlmost every time I add a linear gradient to an object I want to change the angle from 0 to 90 degrees.
Is there a script that I could use for this, so that I could assign a keyboard shortcut and press that instead of clicking the box & typing 90 all the time? (i.e. select an object, run a script & it would apply the standard black to white linear gradient at 90 degrees instead of 0.)
Why is it that if i change the "lighting angle" for Layer A in Photoshop Elements 10 it changes it for all my layers?
is this a bug?
Im drawing in isometric view and want to change the default drawing angle from 30 degrees to another angle.
View 9 Replies View RelatedIm trying to figure out the right way to add a gradient mask but on an angle on my image. i have cut out batman and trying to give him a reflection.i have made 2 reflections using gradient mask . The 1st one is just vertical flipped and i have added a gradient mask,the 2nd image i flipped the image and added a gradient mask,but i also used the skew and distort,but the foot looks a bit odd,due to the skewing and distortion.is there a better technique to achieve a better and more realistic reflection?
View 11 Replies View RelatedSuppose I have an object filled with a linear gradient. This object is the only selected. I just would like to change the angle of the gradient to 25 degrees. So I think I could do:
var doc = app.activeDocument
alert(doc.selection[0].fillColor.angle) // the result is the exact angle of the gradient fill of the selected object. Suppose 12 degrees.
//now the try to change:
doc.selection[0].fillColor.angle = 25.0
No errors are found by the Extended Script Toolkit..BUT...it does not change anything. As Illustrator reference manual does not say this property is read only, I think I could write.
I am trying to acheive the same angle gradient effect that can be done in Photoshop but in Illustrator. The actual thing I want to be able to create as a vector is the graphic attached...
Can this be done by somehow using the blend tool and replacing the spline with a circle?
Is there anyway to change the brush tip angle while and during dragging a brush?
Are there other guides which are not on the x y axis, which ideally could pivot around an adjustable anchor point?
Like in Ill. 10, is there a stroke integer less than 1px?
when i change the angle of an object it effects the whole project, so if i have selected an circle and put the angle of a drop shadow to 90 degrees then i selected a recltangle and set drop shadow angle tp 120 degrees the circle will change to also be 120, does it always do this or am i just doing something wrong?
View 4 Replies View RelatedI am working in the 3ds Max 2014 tutorials. The specific tutorial is "Drawing Patterns for the Clothes". The subsection is "Use the Garment Maker and Cloth Modifiers to Prepare the Skirt". I am working on the area of the SEAMS to create the PLEATS. 3ds Max won't allow me to change the Crease Angle to 150 as it says in the tutorial. When I position the mouse over the box where the dimensions are, it turns into a hand shape. I can change any other dimension in the SEAMS rollout.
View 1 Replies View RelatedI drafted some point features with 0 degrees angle in one computer. When i check in another computer in same drawing for that features those are showing with 5.579 degrees angle. I expected that some system variable maybe change in that computer. which variable i need to change? If this is not related to system variable how to change this angle.
View 5 Replies View RelatedI made a region of a wedge and I thought I made it the right angle. It turns out - it's not.
I've attached a similar file that exhibits the same problem. Except with regard to the specific requirement for the angle, the attached file pretty much representative of my problem, as it exists in the actual file. It's the angle going back to the wall that needs to be changed.
It's unioned. and feel free to imagine the angle is not correct. How would you change it.
How do I change the default value of the angle that is between <> in the command UCS
"specify rotation angle about X axis <180.00>:"
from 180.00 to 90.00
Is this possible to change isometric snap angle? which is by default set to 30 degree.
View 7 Replies View RelatedSo, my gradient doesn't change when i drag the gradient tool a certain way. If i went from any direction it'd just stay same.Why isn't it moving?
View 5 Replies View RelatedI got a problem with editing angle constraint in assemblies. I tried edit property of constraint but it didn't move model. Simply changing Angle attribute of constraint item don't work.
Only way I achieved movemenet is
if(oOccurrence.Constraints[i].Name.Equals(name))
{
AngleConstraint a = (AngleConstraint)oOccurrence.Constraints[i];
Object oEntity1 = a.EntityOne;
Object oEntity2 = a.EntityTwo;
String sVal = "" + angle + " deg";
[Code]...
but this is really slow, as much as changing throught parameter:
if (assemblyDoc.ComponentDefinition.Parameters[i].Name == "d655")
{
Inventor.Parameter invParam = assemblyDoc.ComponentDefinition.Parameters[i];
invParam.Value = Math.PI * angle/180;
inventorApplication.ActiveDocument.Update();
}
I am drawing an isometric drawing. In order to draw a dimension line, the tutor says I have to change the obliquing angle to s0 for left plane and -30 for right plane.
I could find anything in: Modify Dimension Style
Where should I change this angle?
I am constructing a skateboard truck and would like to know how to change the angle of the circle face in the first picture to be at the same angle of the face in the second picture. The highlighted areas have been coloured gold. I have attached the ipt file below.
View 6 Replies View RelatedI have a plan with lots and lot numbering. I made the lot number text annotative and matching view orientation. But when it rotates in the view it rotates about the left justification point instead of middle as inserted into drawing. So I inserted lot numbert text into drawing and changed text to non-annotative, but now i can not change the text rotation angle unless i use rotate command on each individual piece of text (was trying to pick all text and change in properties box). Using feature lines to assist in grading design so not sure if this is an autocad problem or a civil 3d 2012 problem. I can rotate dtext made or inserted in drawing.
View 3 Replies View RelatedHow do I change the crosshair so it is at an isometric angle for drawing?
View 4 Replies View RelatedI want to make metallic text in pse7 (free w/win7) and I am in way over my head (ok fine, it's not all that hard). I don't understand 120 text angle, and what the heck is rasterize?
View 1 Replies View RelatedI want it to be "Angle Right" instead of "Azimuth".
View 6 Replies View RelatedI would like to build an expression that I can use in a label at a structure in a profile view to show the horizontal angle change on the alignment at the structure.
Of course, in the available structure expressions, we do not have the alignment delta angle at that point even though I have a referenced alignment in my pipe network.
Our subdivision code has minimum drop across manhole for different ranges of horizontal angle change.
I want to create a label that shows the minimum drop required at a manhole off it's referenced alignment and I would like to see it on the profile view, because that is where the drop value is relevant.
I've downloaded an EPS from Shutterstock with a series of icons that look like buttons and would like to change the colour breakdown, but keep the shading/ button 'look'. When I try to select a different colour breakdown of blue it turns grey and solid.
View 7 Replies View RelatedHow do I model (or calculate) the fewest welds/fittings required to change angle and elevation in a pipe run, as shown in Option1 below.
For this example the constants are: 8" standard steel pipe, one of the fittings is a standard butt weld 45 (12" radius), bend angle is 70 degrees, and the elevation change is 9". The custom fitting is cut from a standard 8" long radius 90.
Note: Option2 is just shown for reference, I'm only interested in solving Option1
Bend with Elevation change.gif
Just learning 2D CAD and trying to draw a cross section of a timber winder stairs as the strings change angle (I think) at the winder section. Looking at 3nr winding steps.
Setting out a standard stairs is okay, so I have the floor to floor height.
Is there a shortcut to draw a 45 or 90 degree angle from a drawn line on an angle using the pen tool? ie. Rather than just from the x and y axis.
I trace a lot of maps and site plans.
Having recently installed elements on my Mac I have found it freezes everytime I use the gradient map tool and select a colour. I can then no longer click on anything and am required to force quit the program. All my software is up to date.
View 2 Replies View RelatedI'm trying to make some text have a gradient color. I write the text, simplify it and then use the gradient tool normally, however, it's applying the gradient to the entire layer instead of just the text. how to add the gradient and followed the insturctions but it's still not working.
View 5 Replies View RelatedI am trying to make the Gold text as shown in on samples on Google.Most samples use Gradient overlay.
View 7 Replies View RelatedSo I decided to figure out how to create a random noise map type thing in paint.net. I somewhat used a tutorial, but basically I posterized cloud rendering.
However, Now I want to change the color based on a gradient through the middle. (horizontal.) I can figure out how to set up a gradient and change its properties in a different layer.
Also I have troubles getting plugins to work for some reason. Tried one for tiling but it brought up a stupid downloader that didn't show me the text.
EDIT: Color=Hue.