Photoshop :: Create A File To Print
Dec 11, 2006
I created a 5x7 publisher file with some text and a motif I designed in Photoshop and inserted into my publisher document. Now I am ready to create the final piece in Photoshop. Help! I have the graphic saved in various file formats, and want to import it into my 5x7 Photoshop document I've saved. I clicked on Transparent because I want the off white of the paper to show through. The graphic has a transparent background in psd format. I saved it as a pdf file and tried to import it, but that just opened another window. I just want to be able to place the image on my 5 x 7 page, then type in the type!
Also -
I will be sending it to my printer who has requested it in CMYK format. Do I design it in RGB and convert?
My printer will be printing it at 600 dpi. When I open a new file, it only gives me the pixels/inch.
View 2 Replies
ADVERTISEMENT
Mar 25, 2014
How can i create a digital file for print with a CMYK setting?
View 3 Replies
View Related
Oct 15, 2011
Whenever I create a PDF file the capital Ms and Ws get "spikey", if that makes sense. I use the simplex font primarily. I have C3D 2012, but this issue has been present back to LD 2009, and maybe farther. Only happens when I make PDFs, not other formats.
View 1 Replies
View Related
Aug 11, 2013
I can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file.I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another. I have rebooted with no avail.
View 5 Replies
View Related
Oct 30, 2011
I want to create a image file with six passport photos on a 4x6 photo print page. To do that I was asked to do the following:
take a photo yourself, crop it down to a 2x2 square, then copy and paste this into a 2 by 3 tile pattern (4x6 in. canvas size). You now have them print out a 4x6 photo
I don't know how to "tile pattern"
How can I do this in Paint.net
Attached Thumbnails
View 5 Replies
View Related
Nov 1, 2013
I wanted to create an A4 borderless print in my canon mg6150 from within the print module. I can do a borderless print using the canon easyprint.
I go into page setup and the properties of my printer and set the page layout to borderless and click OK.
However, I am unable to set the margins to zero. When I go back into my page setup and check the page layout, it has reverted to normal so it has ignored my setting.
View 2 Replies
View Related
Feb 14, 2008
I'm having trouble printing in Photoshop CS2. Rregardless of which printer I try to print to, I get the message "Could not print because of a problem writing the print file". I have never encountered this error before.
The psd file I am printing is a wall banner, and is quite large (~200MB). It contains elements copied/pasted as pixels from Illustrator CS2. However even if I flatten the file, or save as a flattened tif, I still get the same error message.
Thinking that the psd file is corrupted, I tried printing an earlier version of the file, with no luck. I've even tried printing other, small unrelated files, and can't print those either. Even after rebooting the computer.
The computer I'm using has a dual core processor, 4GB RAM, a decent graphics card and is running under XP. I have gob-loads of HD space and also use a scratch disk.
I really only want to print the file myself as a proof. However, I'm concerned that the banner printers won't be able to print the file either.
View 3 Replies
View Related
Sep 30, 2013
We just started in 2014 last week. When we batch plot to PDF using the DWG to PDF driver we get multi-page files no matter which is selected in the Publish Options. Any way to allow single sheet PDF creation?
View 9 Replies
View Related
Jul 4, 2011
I have both ACad 2002 and 2012, (both 32-bit) installed. I have plenty of RAM.
I'm converting a .dwg file to a .pdf and plotting to the desktop to either send out the pdf file or print to myself.
My problem is that it takes "what seems like forever" to plot a .pdf file to the desktop using 2012.
My situation is:
1. In 2002, using the Adobe pdf driver it takes 6.7 seconds from the time I press plot until the pdf file appears on my desktop.
2. In 2012, using the same 2000 formated file opened in 2012 it takes 37 seconds for the file to appear on my desktop.
3. In 2012, using a .pc3 driver, the same file, qsaved and formatted to 2012 takes 34 seconds to appear on the desktop.
Acrobat was installed on my computer prior to ACad 2012 but I've uninstalled/reinstalled Acrobat and I get the same result as above.
Is there anyway to speed Acrobat up? I defrag'd, cleaned the registry but I get the same results.
View 9 Replies
View Related
Feb 20, 2014
I have a Samsung Laser printer. THe passive USB hub went bad yesterday, and I re-installed teh printer drivers. Everything prints fine from my on-line E-mail, Microsoft Word, etc. However, when I attempt to print from Adobe Illustrator I get a "Print to file" WINDOW that comes up, I never got this before I don't want to print to file (!!!!). I want to print to the printer.
View 3 Replies
View Related
Oct 27, 2004
I have an HP Destjet 9650 printer and am using Acad 2005. I can generate aPLT file, but how do I print it?
View 7 Replies
View Related
Nov 1, 2012
I get a pop up of "Save Files To Folder", but no file names are present, so "save" does nothing. I have all the boxes checked in Print Job, e.g. print to Jpeg file. I have searched, re-read Kelby etc. and come up blank. I have a profile entered for a custom lab.
View 1 Replies
View Related
Aug 17, 2012
I am trying to find a way to save my image file as a jpeg and add -web or -print to the existing file name. This way I can easily see which files are lower resolution for web posting or high resolution for printing.
View 8 Replies
View Related
Apr 12, 2005
i have created a business card for a client. i made it 3.5 in wide and 2 in high. i also added 1/8 in on all sides for bleed and cutting. i want to make a page containing 8 cards per page. i went to automate/picture package in p/s cs and found i can make a page, but not with the images sized to make business cards.
View 2 Replies
View Related
Feb 15, 2014
What is the best place to start learning Elements? Also, can I create a text only image in Elements to print to canvass (i.e. inspirational quotes, etc.)?
View 1 Replies
View Related
May 20, 2011
Why, if a file is 11MB, would the print file be 90MB?
View 10 Replies
View Related
Aug 31, 2013
I have lots of software code (in tSQL, html, JavaScript, XAML, and C#) that I need to print in a long scroll. The scroll will be no more than 440mm wide and as long as it needs to be (though the roll of paper is 45 m long so I’ll need to make sure it is shorter than that).
The resulting code listing is to from part of an exhibit contrasting the ‘sketching’ phase in a multidisciplinary project between design, social science, and software engineering. The exhibit will form part of the Research Through Design conference [URL]...
At first I thought I’d print straight from the development environment (Visual Studio 2012 and SQL Server Management Studio) but I realise now that is not possible because
1) Both tools assume standard page sizes, and
2) I need to rotate the software code listing 180 degrees so that the end of the listing is at the tail of the paper roll.
For these reasons I’m doing it in Adobe Photoshop (CS5, 64 bit, on Windows 8).My workflow for this is verging on the ridiculous.
1) If I cut-and-paste the code listings file by file from Visual Studio 2012 and SQL Server Management Studio into Photoshop (or Illustrator) I lose the formatting, for example the coloring of comments differently form variable declarations. (See [URL]...)
Thus Step 1 is to cut-and-paste each file into a Microsoft Word document.
2) If I cut-and-paste from the Microsoft Word document into Photoshop I still loose the formatting, and Microsoft Word does not seem to be able to cope with the paper roll nor rotating the print. So I save the Microsoft Word document as a PDF and open that into Photoshop.
3) I now have 51 Photoshop files each with one layer containing the text for that ‘page’, though I think it’s an image as it is not editable as text. I then save each of these files.
4) Using Adobe Bridge I open all 51 Photoshop files created in Stage 3 and “Load Files into Photoshop Layers” so that I have a new single Photoshop file with all 51 text image layers in.
5) The layers sit on top of each other. What I need is for them to sit head-to-toe. I don’t know how to do this without spending a million years selecting layers and moving them by hand.
6) If I ever get Stage 5 done I will then group the 51 layers and rotate the result through 180 degrees.
7) I will then resize the result to have a width of 400mm and print the resulting file on our banner printer, having first calculated the resulting paper ‘height’ and turned off the automatic paper cutting.
So my questions are:
1) Is there a better way of doing this?
2) I can see the Photoshop actions that will align layers by their tops, their bottoms, or their centers but how do I automatically align them so that the bottom of layer 1 touches the top of layer 2, the bottom of layer 2 touches the top of layer 3, etc.?
View 1 Replies
View Related
Dec 8, 2004
I am running Photoshop 5.5.
I have a .TIF file from a colour transparency that I had scanned in a shop.
I open the file in Photoshop
& choose FILE PRINT to print the image,
but the PRINT line in the menu is greyed out
& therefore I cannot print it.
What can I try to get the image to print?
View 3 Replies
View Related
Oct 24, 2012
Working on Macintoch with Lightroom 4.2
Before we were able to print a pdf file on Mac, even if we weren't connected to the Raw files. It was enought to click on "brouillon" in french, what is draft I think in english I think. But now with lightroom 4, I can't do it anymore. Is it another way to do it ?
It was really usefull while you were traveling, you didn't have to plug you hard drive, and it was plenty enough to show to my client.And also it was way faster, and I didn't have to travel with all my HD files.
View 6 Replies
View Related
Aug 8, 2013
When i try to use Photoshop filters: Adaptive Wide Angle, Shake Reduction and Liquify. An error pop up saying "Cannot create a file when that file already exists".Just one detail: The liquify filter doen't pop up the error right away, the error occurs just after i press the "ok" button to accept the changes.
I have already tryed to Reset the preferences, tryed to reinstall the PS, Update the PS, download (and install) the latests drivers to my pc.My Pc fit in all the requirements, have the openGL version: 3.0
I also have Photoshop CS5 installed, in which the liquify filter works perfectly.
The first image is just right before a click the "Adaptive Wide Angle".
The second one is right after i clicked it.
View 7 Replies
View Related
May 29, 2013
I created a file in Ps CS5 from three cropped photos taken with my Nikon D700 and processed in NX2. I brought them in from Br in layers an created a new untitled canvas of 16 x 20 and moved them in position and then tried a lot of empty space. The 6 meg JPEG looks pretty good.
I printed it out on my printer and it centers on an 8.5 x 11 just fine but the problem is when I upload it to Costco and look at a 12 x 16 it crops 1/3 of the picture out and the same for a 16 x 20 and even a 20 x 30 for crying out loud. Is it an interpolation problem even though it was a large file?
View 2 Replies
View Related
Sep 14, 2011
Trying to create a ARCH D size pdf in landscape orientation and it cuts off the image and places it back in a protrait orientation. 11 x 17 works great.
View 7 Replies
View Related
Sep 1, 2011
I am trying to export some artwork as a PDF so I can get it printed, but every time I try to export it I get the attached message. I have tried various times always after a reboot but with no luck.
The file is only just under 7mb in size so I can't figure out why it is doing it.
It is important that I export with layers as I have a cutter guide included so the printer can see where he needs to position the print on the sheet and it is printed on both sides.
I am using XDP6
View 4 Replies
View Related
Jun 7, 2009
we have been saving super high resolution images in Photoshop by doing a "print to pdf" as we call it.You print the document, but rather than selecting an ordinary printer, you select Adobe PDF. Within the page layout of that printer, you can specify the resolution and document size to print/save, etc. I love it because you don't loose any of the integrity of the image, but the file size always ends up being in the kilabytes, rather than megs.At home, I don't seem to have that printer as an available option. I don't do the installations at my office, so I'm not sure if there is a driver that I need to install, or does that driver only come with Creative Suite?
View 4 Replies
View Related
Apr 28, 2005
I take a lot of passport sized ID images (45mm high x 35mm wide). When I get them back from the lab I have to identify each image.
If I could have the image filename on the bottom of each image the identifying process can be made a lot less time consuming and of course negate the posibility of misidentifying the image.
View 5 Replies
View Related
Aug 22, 2012
How do I print the photo file name on the photo?
View 2 Replies
View Related
Jul 30, 2013
I am trying to print of about 50 sheets of cross sections. When i go to an individual sheet and plot the pdf comes out fine, when i try to publish through sheet set, it put the table on top of the section view.
Additional Details
Both are creating the PDF with acroplot . I am using autocad Civil 3d 2013.
I have attached both PDF's.
View 3 Replies
View Related
Aug 16, 2012
How to create a banner with colorful zebra print on the inside of the text and a sparkly black glitter border on the outside of the text? I can't find any zebra glitter fills .
View 1 Replies
View Related
Jun 24, 2012
I have 1 large photo (33cm x 200cm) i like to print on A3+ paper. Not cropped or reseized, but on about 4 papers i can glue toether after printing and so get 1 large file.
So in all i'm looking for a way to print from PS cs5 so that , part by part, the image is split on the 4 sheets i like to use.
I can of course manually 'cut' the photo into 4 pieces myself, but i really hoped PS CS5 could do this job automaic for me.
Is their a way i simply did not find yet?
View 7 Replies
View Related
Jun 27, 2012
Using Photoshop CS5 and Windows 7. How do I get a photo file (jpg) to print at specific dimensions? For instance, I have a file open in Photoshop and it's dimensions are: width-3872 pixels and height-2592 pixels. I want to print and have the print size be 10 inches by 8 inches without distorting the image.
View 13 Replies
View Related
Jul 13, 2013
Question: I have a file in Tiff format (large file 145 MB) that I'm not able to print out of CS6. I've tried to save as JPEG, but have been unsuccessful because it is not an 8bit file.
View 3 Replies
View Related
