How to create a banner with colorful zebra print on the inside of the text and a sparkly black glitter border on the outside of the text? I can't find any zebra glitter fills .
View 1 RepliesI know how to create swatches i made some other animal prints (leopard/cheetah). I also made straight line type of pattern swatches.
I don't know how to approach making zebra print swatch, because:
1. the zebra lines are not straight
2. some go all the way through the whole swatch and others stop half way or quarter of the way.
So it is really not like making a cheetah print swatch or a straight line type of pattern swatch.
I have lots of software code (in tSQL, html, JavaScript, XAML, and C#) that I need to print in a long scroll. The scroll will be no more than 440mm wide and as long as it needs to be (though the roll of paper is 45 m long so I’ll need to make sure it is shorter than that).
The resulting code listing is to from part of an exhibit contrasting the ‘sketching’ phase in a multidisciplinary project between design, social science, and software engineering. The exhibit will form part of the Research Through Design conference [URL]...
At first I thought I’d print straight from the development environment (Visual Studio 2012 and SQL Server Management Studio) but I realise now that is not possible because
1) Both tools assume standard page sizes, and
2) I need to rotate the software code listing 180 degrees so that the end of the listing is at the tail of the paper roll.
For these reasons I’m doing it in Adobe Photoshop (CS5, 64 bit, on Windows 8).My workflow for this is verging on the ridiculous.
1) If I cut-and-paste the code listings file by file from Visual Studio 2012 and SQL Server Management Studio into Photoshop (or Illustrator) I lose the formatting, for example the coloring of comments differently form variable declarations. (See [URL]...)
Thus Step 1 is to cut-and-paste each file into a Microsoft Word document.
2) If I cut-and-paste from the Microsoft Word document into Photoshop I still loose the formatting, and Microsoft Word does not seem to be able to cope with the paper roll nor rotating the print. So I save the Microsoft Word document as a PDF and open that into Photoshop.
3) I now have 51 Photoshop files each with one layer containing the text for that ‘page’, though I think it’s an image as it is not editable as text. I then save each of these files.
4) Using Adobe Bridge I open all 51 Photoshop files created in Stage 3 and “Load Files into Photoshop Layers” so that I have a new single Photoshop file with all 51 text image layers in.
5) The layers sit on top of each other. What I need is for them to sit head-to-toe. I don’t know how to do this without spending a million years selecting layers and moving them by hand.
6) If I ever get Stage 5 done I will then group the 51 layers and rotate the result through 180 degrees.
7) I will then resize the result to have a width of 400mm and print the resulting file on our banner printer, having first calculated the resulting paper ‘height’ and turned off the automatic paper cutting.
So my questions are:
1) Is there a better way of doing this?
2) I can see the Photoshop actions that will align layers by their tops, their bottoms, or their centers but how do I automatically align them so that the bottom of layer 1 touches the top of layer 2, the bottom of layer 2 touches the top of layer 3, etc.?
I own a new LAN Gaming/IT Store thats been open for around 3 weeks and I am in need of a photoshop master for 2 high res banners from Vista Print. I've uploaded their XL Banner Photoshop template, and 2 images that I would like incorporated (this type of design is used on the window advertising), or a new design with the same color and feel (Blue, PC ...components). The first banner needs to say "Solutionz Computing", and display a list of our services in a computing style font, in dot points or however you can creatively display it - it needs to say:
- iDevice/Screen Repairs
- PS3/Xbox/Wii Modifications
- Eyefinity Racing Simulators
- Gadgetry (Solar, USB, novelty etc)
The second banner can have the same background, same "Solutionz Computing", just different dot points as follows:
------
- Party Hire
- Members Discounts and Benefits
- In-Store Gaming
- LAN Party Nights and Event Hosting
I have a client who asked me to create artwork for a banner she is printing for a trade show. The banner is 19.5 FEET long and almost 8 feet high. I have designed the banner as 6.5x2.6ft with the intent of then dividing it into 9 equal parts which I would blow up to 6.5x2.6 and send off to the printer. So far so good. The problem is that the segments are still so large that when I try to export them as PDFs, I am running out of memory. I tried doing them as jpegs, but when I change the resolution for export to 300dpi, nothing changes- the number of pixels x umber of pixels doesn't increase. My client needs this artwork off to her printer asap and I am at a complete loss.
View 4 Replies View RelatedI'm using AutoCAD 2011 with a Ricoh Aficio W3601 plotter. Occassionally I need to plot out pipe wraps for projects that would be longer than a 36" sheet. Our plotter has a 36" x 150' roll capacity. I have figured out how to define a custom user size paper and get it to show up correctly under the properties button in the plot dialogue box. The print preview is correct, and the plotter cuts the paper off at the correct length, however, the printed portion of the plot is always cut off at 36" or is printed the wrong direction and limited by the roll width. I have tried every combination of landscape/portrait combination without success. I am trying to plot from the model tab using a 1:1 scale.
View 4 Replies View RelatedI'm creating a banner with the size of 96x36. Every time I try and print or export to a PDF, it comes up with a I/Q error.
So, I thought it might be something in my file, so I created a new file, and just put one small red square on the document.
Same error??? So I made a smaller document 65x25 or something to that effect. It printed. So is there some sort of
size restriction??
There is a new plug-in for Illustrator from Onyx for banner print preparation:[URL]
Is there any macro or external program with similar functions for the preparation of banner print (Bleed, grommets, marks - see attachment) for CorelDraw?
Is there a way to change an object's fill from a gradient to a solid color that is the average of that gradient? What I want to do is have a grid of squares, select them all and apply a colorful gradient to them as a whole, and then average each square's color so I end up with a pixelated look. Kind of like the mosaic filter in Photoshop, but in vector.
View 3 Replies View RelatedHow do I create the background of a banner?
View 19 Replies View RelatedI'm looking to create three banners and am having trouble finding video/instructions specific to PSE9.
View 7 Replies View RelatedI am trying to find a program that will work easily in creating multi-image banners. For example I may use 12 5x7 images that run horizontal on 10" roll paper. Can I do this with Lightroom or do I need to use a different program? I am open to recommendations!
View 1 Replies View Relatedi can use to create a spitfire plane that will fly within a banner in the header part of my site.
the plane will have a banner that is pulled behind it with the name our group.
what software should i use if photoshop can not do this,
Is there a way without having to open up Illustrator to create a banner? I am working on a water label and in the design I need to have a banner with folds on both ends like on a welch's grape juice bottle.
View 3 Replies View RelatedI've been fooling around with paint net to get acclimated. I know how to make rectangular banner - but I would like to make a banner that has rounded corners. Does paint net allow me to do that>?
View 11 Replies View RelatedI want to widen my website banner image from 950px to cover the whole width of the screen no matter what resolution or monitor
it's the blue image at [URL].......
I want to position the logo and the words exactly where they are right now but 'stretch' the image along with its shading gradient, right across the screen.
so i am trying to animate words for a banner, but every time i create a word for a layer it makes a new layer, i need to find out how to get words on one layer so that i can animate them to move the way i want them to (i need three words on one layer, so i can move them around and all using animation with a .gif file.
View 2 Replies View RelatedI want to delete a layer in a banner. I am a novice with gimp and looked to a tutorial to find out how. It says:
Go to File > Dialogs > Choose Layers or just hit CTRL-L. This opens up the Layers Dialog (or window).
The problem is there is no dialogue option in file. I do not know what to do.
file:///C:/Users/michael/Desktop/gimp.htm
I want to make my banner shaking
View 3 Replies View RelatedI have created this over and over, and it seems every time, the bottom comes out fuzzy. What would be the best way for the bottom "triangle" to be straight like the sides and top?
View 17 Replies View RelatedI'm using the brick wall background, and I would like my banner to look like it is embedded in the wall itself, almost like pressed text. Is there a way to possibly to this?
View 2 Replies View RelatedHow to make a banner that is 800x175, and I want an image at each end and text in the middle. How to put an image in here i tried to copy/paste a .jpg and a .png but it wouldn't do it. Anyway i want to fade the edges of the images to match the background, so it all looks like one seamless image.
View 4 Replies View RelatedI'm trying to make vertical banners, and I need to get the text to go vertical......how do I do that? I've dug through all of the text tool options I could find, and pretty much anything I could think of, and still no luck.
View 8 Replies View RelatedI am working in CoreDraw X6 on Windows XP, and I was trying to create an animated gif banner. When I completed the set up, hit preview, the animation did not work. Thought maybe it was just the preview so I saved the file as an animated gif. Opened it in Windows Picture Viewer, and it still did not work. I also tried the process in X5 without any successful result.
View 5 Replies View RelatedI need to create an animation of a cloth banner attached to a wall. The bottom of the banner will be either held up, or rolled up. Then I want it to be released, revealing what is on the banner.
Are there any tutorials showing how to set up cloth using physX?
I am building my first website for myself. I am using Elegant Themes, which uses WordPress. I am attempting to modify (reduce in size) a banner on my website, which appears within a slider on the homepage. After modifying the image in Gimp 2.8, I attempt to save/export the new image, and a window appears "The folder contents could not be displayed." How can I proceed?
View 1 Replies View RelatedI made a web banner (728 x 90) but forgot to set the background to beingtransparent (so the web page background can show through).
Do you know how I can easily change the background of the banner totransparent?
I've been trying to make a banner for Etsy using a couple of my own photos but I can't seem to get more than one photo to cooperate.
Here's the tutorial I've been using: How to Produce an Etsy Shop Banner in GIMP
I'm able to get the first photo situated but when I try to add more, the image won't scale down correctly like the first one did. Am I doing something wrong? Can I even add multiple photos to the same banner using this method?
I want the yin yang sign at the end of my text banner. how to do that?
View 3 Replies View RelatedI need a way to take the black stripes off of a zebra, but without using the pattern clone tool.
P.S. on Adobe 7.0
When printing from Photoshop CS3(Version 10.0.1) to a brand new Zebra ZXP Series 3 card printer in Windows 7 32 bit I am getting this: errors:
I went from an XP machine to Windows 7(with a video card plenty of memory) and still the same errors. I updated the Zebra printer drivers and firmware. I can test print from the PC just fine. I even tried CS4 with the same result. The user purchased a license for CS3 so I am troubleshooting with CS3 at this moment. My user is way behind in printing id badges for his Fireman and needs this resolved ASAP. I may have to go with Zebra's Card Studio Software if there is no resolution for this Photoshop issue.